Material Handling Equipment
The BAWR Series Aluminum Ramp enables delivery personnel, shippers, and receivers to load and unload trucks when loading docks are unavailable. Easy Access Ramps feature a 1-1/2" high safety curb on each side. These models are equipped with steel safety chains with steel grab hooks that can be attached to each side for securing the unit to the truck safely.
The HVR Series Vault Ramps are designed to adjust and compensate for uneven height differences between the exterior floor at the vault door opening and the interior floor at the door opening. Push button control allows for the operator to extend the deck lip of the Floor Hydraulic Ramps quickly for loading and unloading procedures.
Loading Dock Levelers
This HPK 4 Movement Solid Deck Leveler series electric hydraulic dock leveler is a rugged long lasting continious solid deck leveler. Available as 4 movement models, Slides in / out and travels up / down. The service capacities range from 20, 000 to 30,000 lbs.
This BH2 Hydraulic Dock System Series is our economical electric hydraulic dock leveler, push-button return. Available capacities from 25,000 to 45,000 lbs.
This BHED Hydraulic Edge of Dock Leveler Series comes with a pushbotton control. Double-cylinder design for deck and lip. Capacities range from 20,000 to 35,000 lbs.
This BMTD manual Low Dock Leveler series is designed for older buildings with low dock applications. Requires 57 to 67 lbs of force to operate. This unit is to be anchored on top of the dock. Capacities range 20,000 up to 30,000 lbs.
BHTD series hydraulic Top of Dock Levelers are most often used for loading docks that are below the 48" industry standard dock height. Capacities range from 20,000 up to 30,000 lbs.
The BRS manual Rail Dock Plate series is available for all variety of railway boxcars, including refrigerated boxcars. Designed on specific information provided by customer. Capacities range 15,000 to 40,000 lbs.
This HSD hydraulic Rail Dock Leveler series is a push button control designed for rail car loading and unloading. Install 1, 2 or 3 levelers next to each other for wide platforms. Features horizontal slide deck lip, and two hydraulic cylinders which control the vertical deck movement. Capacities range from 20,000 to 30,000 lbs.
Dock bumpers available as horizontal or vertical mount. Designed to anchore to the loading dock wall to provide excellent protection from the truck and the loading dock wall. Manufactured to help prevent damage in dock areas by absorbing jolts and impacts between trucks and loading docks. Different unit models include laminated or molded rubber. Laminated are constructed of fabric reinforced rubber from recycled truck tires. Molded rubber is manufactured from fiber reinforced prime rubber with nylon including polyester.
Dock Lifts
The BTAD series electric Scissor Truck Dock Lift our most popular mobile low profile unit. Size lengths range from 72" to 96" long. Services from ground to dock height. Capacities range from 3,000 to 5,000 lbs.
The BTAD-S2 series electric hydraulic Scissor Lift Dock Leveler heavy capacity protable unit. Size lengths range from 72" to 120" long. Services from ground to dock height. Capacities range from 5,000 to 8,000 lbs.
This unit is designed as an economy lift with a lowered height of only 5" including an approach ramp a part of the structure. Unique lowered height allows for loading and unloading procedures from dock to ground level with no pit required.Bridge Plate is 18" x 60" and the Approach Ramp is 30" x 60" steel diamond plate. Capacities include 5,000 and 6,000 lbs.
Dock Truck Restraints
The BMVR Series Trailer Restraints will help to prevent unscheduled truck departures and trailer creep by locking the trailer ICC bar to the dock. The Manual Truck Restraint unit helps keep loading docks safe by reducing the chance for accidents, such as those sometimes caused by roll away trucks.
The Bear Claw BEVR Series Dock Restraint helps to prevent trucks from prematurely pulling away from docks. These Electric Trailer Restraints reduce the chance for accidents. This series helps to reduce the chance of load shifting and trailer creep.
Dock Seals and Shelters
Beacon Dock Door Seals are designed to keep the weather elements out, assist in keeping energy costs down and also aids as an anti-theft protection barrier. Overhead Dock Door Seal is available to fit all standard over head door openings measuring 8' x 8', 8' x 10', 9' x 9', 9' x 10' and 10' x 10'. Standard door seal projections 10" or 20". Special door seal projections available. Special angled door seals are available to accommodate for driveway incline or declines. Dock Shelter standard projections are 18", 24", 30" or 36". Special projections are available.
The B100 series Dock Door Seal for overhead doors are used for trucks or trailers during loading or unloading. These seals keep out cold, wind, dust and fumes. This series features wrap-around style material to protect wood and foam from outside elements.
The B101 Series Loading Dock Door Seal with auto head curtain features wrap-around-style material to protect the wood and foam from the outside elements. The Warehouse Dock Seal unit features safety yellow guide strips and breather slots on the side and head pads. The auto head curtain protects the area above 8' high that is not covered by the trailer.
The Loading Dock Seals assist in keeping out damage-causing weather elements as well as bugs. These Warehouse Loading Door Seal units feature wrap-around style material to protect the wood and foam, breather slots, and condensation holes.
The B750 Sereis Dock Door Shelters are designed for use on dock doors up to 10' x 10'. It assists in energy saving by sealing out the outside elements. This Loading Door Shelter unit is designed for the truck to back into the shelter, not against it. The side and top curtains act in a wiping action against the side and top of the trailer, providing a complete seal. When the trailer is in place at the dock, access is accomplished at the rear of the trailer to facilitate loading and unloading procedures.
The BD-500 Series Dock Door Rail Shelters feature a wood or steel frame covered with vinyl coated nylon. These shelters are designed to protect airways between rail docks, door and freight car opening against environment. The Rail Door Shelter unit provides year round weather protection for material handling operations. This series is designed for platform or non platform docks.
The BDBS Series Bug Door Screen is designed for use at facilities such as loading docks and garages. This Overhead Door Screen helps keep out insects and birds and reduce dust and wind, improving employee comfort. This product lets in fresh air and light.
The Beacon MH Series Dock Door Metal Hoods are a protection canopy for dock door application. Length: 10'. Projection: 14" 18" 24" 30" or 36".
Warehouse Dock Door Seals are designed with an auto push back head curtain adjusted automatically as the truck backs into the dock lowering energy costs by sealing out weather elements.This unit provides seals for 9' wide x 10' tall door openings. The 10" projection seals are to be used with a 4" to 6" dock bumper projection. The 20" projection seals are to be used with Edge of Dock Levelers inclusive with a 14" to 15" dock bumper projection.
Loading Ramps
The BYR Series Steel Yard Ramp enables workers to load and unload trucks, trailers, and rail cars from ground level at buildings that don't have a freight dock. This Mobile Yard Ramp unit is operated with a 2-speed hand crank. These models feature 9" steel wheels, 4" high safety curbs, positive traction open steel grating, a 15" overlap lip, rubber bumpers, and safety locking chains.
The BAY Series Aluminum Yard Ramp with aluminum grating allow workers to efficiently load and unload trucks, trailers, and other vehicles when no dock is available. One worker is able to position and then employ the units from ground level. These movable Semi Truck Ramps feature 18" x 5" mold-on-rubber tires for easy portability.
The The BDYR Series Dock Yard Ramp allows workers to load and unload trucks, rail cars, and trailers from ground level at facilities without freight docks. Industrial Ramps are operated via a manual 2-speed hand crank and feature positive traction open steel grating, safety locking chains, 9" steel wheels, rubber bumpers, 4" high steel safety curbs, and a 15" overlap lip.
The BSY Series Portable Yard Ramp with steel grating enable employees to quickly load and unload trailers, trucks, and similar vehicles when there are no docks available. Portable Dock Ramps allow one employee to position and then use the units from ground level.
The BSWR Series Steel Wheel Riser Ramp is designed to elevate semi-trailers to loading dock height for maximum serviceability during loading and unloading. Each unit is equipped with fork slots for a easy transporting with a forklift. These are sold and priced each as an individual unit. They are designed to be stackable for storage in confined spaces when not in use. The Wheel Ramps are designed to be in compliance with OSHA's requirement of a 10% maximum grade of ascending or descending loaded fork trucks.
The BAWR Series Aluminum Ramp enables delivery personnel, shippers, and receivers to load and unload trucks when loading docks are unavailable. Easy Access Ramps feature a 1-1/2" high safety curb on each side. These models are equipped with steel safety chains with steel grab hooks that can be attached to each side for securing the unit to the truck safely.
The BAWR-G Series Trailer Ramp is highly efficient for truck loading/unloading when an open dock is not available. They are ideal for loading dock areas that often reach overflow capacity as well as for businesses that don't have a loading dock. These Portable Ramps provide excellent traction due to its open deck design, which allows water, snow, and ice to fall through to the ground instead of collecting on the ramp surface. Each side of the unit features a 2"-high safety curb. Each model features 2 safety chains to connect the unit to the trailer. It also has an overlap lip that rests on the trailer bed, allowing smooth transition.
The BFWR Series Loading Ramp has an abrasive surface to provide good traction, whether wet or dry. It is ideal for assisting in the loading and unloading of products from truck or trailer beds. These Van Ramps are durable and long-lasting. They are designed for use with hand carts.
The HVR Series Vault Ramps are designed to adjust and compensate for uneven height differences between the exterior floor at the vault door opening and the interior floor at the door opening. Push button control allows for the operator to extend the deck lip of the Floor Hydraulic Ramps quickly for loading and unloading procedures.
Lift Equipment
The Beacon BEHLT Series Hydraulic Lift Table is designed to raise materials the proper ergonomic height for the worker. These are excellent for many industrial locales including warehouses, distribution centers, and manufacturing facilities. These Material Lifts have a 3,000 psi hydraulic component rating.
The Beacon BEHLTS Hydraulic Scissor Lift Series is designed to lift items to proper ergonomic working height, reducing worker fatigue as well as the risk of repetitive-motion injuries. This Compact Lift unit is ideal for work in tight spaces and is available in a single-leg style. This series has an emergency internal brass velocity fuse and a full perimeter pinch point guard.
The Beacon BEHLTG Ground Lift Table Series lowers 1/2" to the floor for quick loading and unloading and is designed for use when a fork truck is not available. Pallets are loaded onto the Pallet Lifting Table with pallet trucks and then raised to an ergonomic working height. Foot pedal or hand controlled models are used to compensate for uneven heights, making the workplace more ergonomically efficient. Enclosed motor is remote and can be located with the standard hydraulic hose up to 8' away. Additional hose length is available as an option.
The Beacon BEHU Stationary Scissor Lift series has an an open center "U" design that allows pallet trucks to place a load on the platform. The Scissor Lift features an adjustable height for better positioning.
The BCDL Small Scissor Lift Series is a high-speed electro-hydraulic unit that raises work materials to an ergonomically proper height for the worker. This Table Lift is supplied with standard straight toe guards for surface mounting. If pit mounting is required, please specify when ordering, and tapered toe guards will be supplied at no charge. Call Beacon for optional electric toe guard pricing. The unit also has degreased surfaces that are oxide-primed and finished with 2 enamel coats.
The BEHLT-WS Economy Scissor Lift series raises materials to an ergonomically correct working height. These Ergonomic Lift Tables heighten workplace safety with minimum space requirements and has a travel time of 8 seconds.
The BEHLTD Double Scissor Lift series is designed to lift products to high elevations. This Lifting Table is ideal for use at all types of manufacturing and industrial facilities and is constructed of heavy-duty steel.
The BEHLTSD Small Lift Table series is designed to raise items to an ergonomically correct working height. It is ideal for work that must be done in tight spaces. This Double Scissor Lift Table unit has smaller deck sizes customized to different workplace space requirements. This series has a full-perimeter pinch point guard and an emergency internal brass velocity fuse.
The BDSL Upright Scissor Lift series is a high-travel, double electro-hydraulic lift. This Upright Scissor Lift is supplied with standard straight toe guards for surface mounting. If pit mounting is required, please specify when ordering, and beveled toe guards will be supplied at no charge. Call for optional electric toe guard pricing. This unit has a high-pressure gear pump and a hydraulic flow-limiter valve at the base of each cylinder. These models also feature safety restraint maintenance bars and mechanical upper travel stops.
The BTSL Series Electric Scissor Lift is a high-travel triple electro hydraulic unit. This Double Scissor Lift Platform series features a high-pressure gear pump and a hydraulic flow limiter at the base of each cylinder. These units also feature mechanical upper travel stops and safety restraint maintenance bars.
The BQSL Tall Scissor Lift series is a high-travel, quadruple-height electro-hydraulic lift. It features a high-pressure gear pump and lifetime self-lubricating, anti-friction bearings at all pivot points. This High Scissor Table series is supplied with standard straight toe guards for surface mounting. If pit mounting is required, please specify when ordering, and beveled toe guards will be supplied at no charge. Call Beacon for optional electric toe guard pricing.
The BMLT Hydraulic Lift Table series is an electro-hydraulic unit. This series features a smooth steel platform. Each High Capacity Scissor Lift unit is supplied with standard straight toe guards for surface mounting. If pit mounting is required, please specify when ordering, and beveled toe guards will be supplied at no charge. Call for optional electric toe guard pricing. These models also have cylinder rod end protectors and dual safety restraint maintenance bars.
The BMLTDW Heavy Capacity Scissor Lift series is a double-wide, high-capacity electro-hydraulic scissor lift. These models feature a smooth steel platform. They also feature dual safety restraint bars. This Heavy Duty Lift Table is supplied with standard straight toe guards for surface mounting. If pit mounting is required, please specify when ordering, and beveled toe guards will be supplied at no charge. Call Beacon for optional electric toe guard pricing.
The BHLTTL Scissor Lift Table series is designed to lift work loads of significant length and position them at an ergonomically proper height for the employee. These heavy-duty, electro-hydraulic units feature double-long scissor legs for workers needing longer platforms. They feature smooth steel tops. This Hydraulic Lift Platform series is supplied with standard straight toe guards for surface mounting. If pit mounting is required, please specify when ordering, and beveled toe guards will be supplied at no charge. Call Beacon for optional electric toe guard pricing.
The BMLTDL Hydraulic Platform Lift series are heavy-duty, high-capacity lifts. These Electric Lift Tables feature dual safety restraint maintenance bars and positive stops on all four corners for maximum roll over capacity. These units also feature dual safety restraint maintenance bars and cylinder rod end protectors. These models are supplied with standard straight toe guards for surface mounting. If pit mounting is required, please specify when ordering, and beveled toe guards will be supplied at no charge. Call Beacon for optional electric toe guard pricing.
The BMLTQD Heavy Duty Scissor Lift series is an electro-hydraulic unit designed for extreme lifting. These Custom Lifts have a design safety factor of 3 to 1. The surfaces are degreased, oxide-primed, and finished with 2 enamel coats. This product is supplied with standard straight toe guards for surface mounting. If pit mounting is required, please specify when ordering, and beveled toe guards will be supplied at no charge. Call Beacon for optional electric toe guard pricing.
The BABLT Air Lift Table series is a clean, maintenance free option for lifting products. These Pnuematic Lift Table units are designed to raise products to your required height using clean, filtered air for operation. This is a great ergonomic solution for any work environment that wishes to reduce worker fatigue and risk of injury. Units are also well suited for use in clean rooms where hydraulics are not an option.
Tilt Equipment
The Beacon BUNI Lift and Tilt Table series is designed to place containers within ergonomically optimal reach of machine operators and assembly line personnel. The design of the Assembly Line Tilter units lessens worker fatigue by minimizing repetitive stretching and bending that normally occurs when reaching into containers. The platform has a 12" high lip on tilt side. Units must be lagged to floor.
The BEM1 Industrial Tilt Table series enables easier loading of crates, pallets, baskets, or boxes by tilting them 45 degrees (BEM1-200 models) or 90 degrees (BEM1-500 models). They feature an industrial-quality, 56-frame, 2 Hp motor. All Pallet Tilter models come standard with a 24 V push-button hand control.
The BGLT Ground Tilters series are excellent for tilting applications that require a pallet truck for loading and unloading. The Industrial Parts Tilter units are electro-hydraulic. To increase worker safety, pinch points are provided on the 4 sides of each model.
The BZLTT Ground Lift and Tilt series is designed to lift items to an ergonomically proper position and then tilt them to lessen worker bending. Items can be loaded and unloaded from this Industrial Ground Tilting unit using a standard hand pallet truck. No pit mounting is required.
The BEHLTT Lift Tilt Table series raises work materials to an ergonomically correct height and then tilts them to within comfortable reach of the worker. This series is controlled via push button to maximize productivity. Tilting Lift Platforms make the workplace more ergonomically sound.
The BEMC Corner Tilting series works to reduce repetitive motion injuries and to lessen worker fatigue. It is designed to tilt crates, boxes, or baskets 30 degrees. This Hydraulic Angle Tilter unit has built in fork tubes designed to ease portability with a fork truck. This series also features water-resistant, push-button control.
The BAIR Corner Tilters series enable ergonomically correct loading and unloading of bulk crates, boxes, and containers. They tilt up to 45 degrees and are activated by a foot pedal or a hand-operated control lever. The Air Corner Tilting unit's factory-preset adjustable regulator starts rotating the container when the weight reaches about 900 lbs. The pressure can be adjusted to the weight of each application. By doing so, the air bag will automatically tilt the unit as it is unloaded, shifting the contents to the corner for easy access.
The BHTT Hydraulic Tilt Tables series are heavy duty with deck sizes up to 120" x 120" and degree of tilt from 45 to 90 degrees. Capacities of these units range up to 6,000 lbs. Each product is electric hydraulic powered by a motor pump reservoir. The Heavy Capacity Tilter unit has an adjustable limit switch to control the tilt angle. internal high pressure gear pump with check valve, relief valve, pressure compensated flow control valve, solenoid valve, suction, and return filters make this series an efficient ergonomic work station piece of equipment.
The BHUE Hydraulic Upender series upends and tilts work materials to an ergonomically correct position for the worker. The unit features limit switches and mechanical stops in both directions. This Upender Rotator has double-acting hydraulic cylinders and smooth steel tops with 3-3/4" straight safety toe guards with safety stripes. The unit features hard, chrome-plated, polished shafting, hydraulic cylinder rods and axles. The series also has double-acting hydraulic cylinders and lifetime self-lubricating, anti-friction bearings at all pivot points.
Protective Barriers
The BBOL Steel Bollards series are utilized for indoor and outdoor security applications: Protecting personnel, shoppers, work areas, commercial window fronts, roadways, or equipment environments from unwanted vehicle traffic access. This unit helps restrict protected areas for parking lots, sidewalks, side and front of building exterior and interiors. Pipe Posts are commonly used at dock doors and personnel doors. May reduce insurance premiums-check with your insurance representative regarding your bollard application program.
The BTEG Corner Bollard series protects corners of buildings and machinery from damage caused by fork trucks or other mobile equipment. The 90-degree bend of the Corner Post fits snuggly around corners to provide optimum protection.
The Beacon BHPRO Machine Guards series are designed to help enable fork truck and mobile equipment safety. These models are ideal for protecting building walls, racks, and many different types of expensive equipment. Safety Bollards feature 2 base plates, each of which has 4 pre-drilled mounting holes.
The BBOLPP Bollard Post series safeguards personnel and work areas, both indoors and outdoors. The unit is designed specifically to be both set in and filled with concrete, enabling them to become permanent protective fixtures with maximum strength and durability. These steel models are extra long, allowing them to stand at optimum height after their bottom portion has been set in concrete. These Traffic Bollards feature welded anchoring tabs on their bottom portion, helping to ensure that they remain permanently and securely anchored in the concrete. A removable cap allows the concrete to be poured in.
The BBOL-R Removable Bollards series are a practical, efficient barrier equipment for work areas that have considerable vehicle traffic. The unit is held in place with a sleeve that is set in concrete. Pour in Place Posts are designed to be lifted out of the sleeve when access to the area is needed and then later put securely back in place. The 10" sleeve is included with each unit.
The BBOL-SSTOR Telescopic Bollard series with door and lock is designed to store in the ground when not needed. Each unit includes a sleeve which is to be set in the ground or concrete and acts as a housing. Retractable Posts have an easy to lift handle on top that enables convenient raising and lowering of the units.
The BSPBOL Flexible Bollards series are designed with a unique spring-loaded design and will not bend or break like rigid bollards. Spring Loaded Posts are designed with a visual and audible warning to help prevent equipment damage. The optional light/siren unit simply slides into the open top of the unit.
The BSQ Bollard Covers series increase the lifespan of bollards and keep them looking good with no need for repainting. The reflective tape that comes standard will increase the visibility and safety function of your bollards. Bollard Sleeves eliminate the need to hassle with scraping, maintenance, and painting on bollards. They are ideal for indoor or outdoor applications and are perfect for parking lots, drive thrus, ATM protection, warehouses, distribution centers, and other industrial and retail settings.
Beacon Decorative Bollards are designed for aesthetics as well as safety. Ornamental Bollard posts include bollards such as removable bollards, the bollard system, bollard post, decorative bollard, and an outdoor smoking station. Units also include sleeves for bollards, such as bollard covers and ornamental bollard covers and are available in a variety of styles to match your building and are available with lights for extra safety.
Guard Rail systems are designed for warehouses, parking garages, distribution facilities, warehouses and manufacturing plants where protection is a concern. Several different types of guard rail designs are available including bolt on and drop in place. The Safety Guard posts are available as pour in place or bolt on to concrete surface. Please check your rated speed requirement when selecting the correct guard rail system. Utilized indoors or outdoors, designed for protecting building corners and machinery from fork truck and other vehicle damage. Beacon carries both a curved and a straight guard rail collection. Tubular posts are available for continuous or perpendicular rail mounting.
The BGR Safety Guard Rails series are designed for use in warehouses, parking garages, distribution facilities, and factories where protection is important. These one-two-or three-high railings protect both personnel and equipment visually as well as physically. These Galvanized Finish units can be used indoors or outdoors and are ideal for protecting building corners and machinery from fork truck and other vehicle damage. Tubular posts are suitable for continuous or perpendicular rail mounting.
The BST-GR Guardrail Systems series are designed for use in parking garages, warehouses, distribution centers, machine shops, and factories. Structural Guard Rails protect both personnel and equipment visually. They can be utilized inside or outside and are perfect for a visual protective barrier. The tubular posts are designed for continuous or perpendicular rail mounting. These units are removable for easy access.
The BYGR Warehouse Guard Rails series are designed to protect buildings, equipment, and personnel from damages and injury both inside and out. These Industrial Safety Structure units are available in drop-in style for easy access or bolt-on style for permanent installation.
These Beacon structural guards are designed to protect equipment, pallet racks, building walls, corners, overhead doors, and more. Structural protector equipment is available as a rack guard, low profile rack guards, traffic barricade, structural column protectors, overhead door track protectors, steel pipe guards, corner guard, corner protector, bumper wrap, adjustable rack guard, column wraps, and more. Warehouse Safety Barriers are available in a variety of styles, constructions, and colors in order to suit individual business needs.
The BPGWM Steel Pipe Guards series are an asset to the protection of your building or garage pipes. By protecting pipes with these units, they will have additional safety from vehicle accidents or damage. These Pipe Shield units are made of a heavy duty steel.
The BDSG Pipe Protectors series safeguard pipes and downspouts from damage caused by impacts from mowers, fork trucks, and similar work vehicles. It fits downspouts up to 6" in diameter. Steel Downspout Protectors are best suited for heavy-duty applications. Polyethylene units offer protection while deflecting vehicles.
The BVB Structural Column Protectors series will give wrap-around protection from damage to columns, tubing, or pipes. These Column Bumper units can be stacked two high for optimum protection.
The Beacon BRUD Pallet Rack Guards series are designed to safeguard pallet racking with durable, wrap-around protection. The unit fits pallet racking measuring 3-1/8" wide x 4-1/4" deep. Pallet Rack Post Protectors increase pallet rack column strength on impact by over 100%. Each unit includes a 1/2" thick rubber bumper insert and hardware.
Protect wires with the Wire Ramp Cover that enables fork trucks, lifts, carts, and workers to safely cross over facility cords and cables. Aluminum Hose Bridge units are lightweight to enable easy-to-move portability.Widths range from 2-7/8" to 21-1/6" and heights from 7/16" to 3-1/2". Standard lengths are from 24" to 72".
Heavy Duty Door Track Protectors are designed to protect the overhead door track from fork truck, pallet and cargo damage during loading and unloading procedures.
The Door Track Guard - Overhead Door Track Protectors help protect tracks of overhead doors from pallet trucks, fork trucks, and similar work vehicles. This product is used as a capital equipment protector.