Coatings, Floorings, and Tank Linings

Primer 67

A high solids epoxy primer for steel and concrete. Designed to prevent abrasive blasted steel from developing rust bloom prior to the application of a coating or lining system.

Technical Data Sheet
Safety Data Sheet (Comp A)
Safety Data Sheet (Comp B)

Features:

Meets most VOC Requirements
Low Odor
User Friendly
Tolerant to moisture vapor transmission (<5 lbs per 1000 ft²)

Primer 67LV

Low VOC
Low Odor
Meets CDPH standard method version 1.2 test for low cured VOC's
Compliant with LEED 4.1
Meets SCAQMD Rule 1113 for VOC content
Tolerant to moisture vapor transmission (<5 lbs per 1000 ft2)

Health Product Declaration (HPD)

DUDICK ARCHITECTURAL RESINOUS FLOORING AND HIGH PERFORMANCE COATINGS ARE STATE-OF-THE-ART IN TECHNOLOGY.

Dudick Inc. was founded in 1970 as a formulator and manufacturer of heavy duty corrosion resistant linings and coatings used in demanding industrial applications. That knowledge in the development of high corrosion resistant linings is the backbone to our architectural systems used in biological containment, research laboratory, healthcare, and life science facilities. Dudick architectural systems are high performing floor, wall, and ceiling coating products that are 100% solids and low emitting, a contributor towards LEED certification.

All Dudick Architectural systems contribute towards satisfying credits under LEED. For more information on the LEED program and the U.S. Green Building Council, visit www.usgbc.org.

ATTENTION:
Architects and Interior Design Professionals

In cooperation with the Health Product Declaration (HPD) Collaborative, Dudick Inc. now has available all architectural products in HPD Collaborative format along with its technical data sheets.

Our architectural line includes a complete series of wall and floor coating systems comprised of epoxy, urethane, MMA and fluoropolymers for laboratory and university use including vivariums and hospital surgery suites. These products will handle all corrosive liquid as well as biological containment needs.

COMPANY OVERVIEW

Dudick Inc., located in Northeast Ohio, is a world leader in High Performance Coatings, Floorings, and Tank Linings. For over 50 years, we have provided solutions in corrosion resistance and chemical containment systems for food processing, steel production, chemical processing, pulp and paper, electronics, power, and biological research labs. Our products meet the stringent requirements of FDA, USDA, and NSF.

ALL PRODUCTS

Steri-Coat

High performance wall and floor systems for industrial and commercial facilities.

APPLICATIONS

Clean Rooms
Food & Beverage Processing
Warehouse/Storage Areas Manufacturing Plants
Waste Water Treatment Facilities
Pharmaceutical & Research Facilities

Steri-Coat P

This amine cured epoxy coating provides a very tough seamless coating system for high abuse areas. It is an excellent coating for areas requiring protection against the growth of mold, mildew, fungus and bacteria. The unique hybrid binder in Steri-Coat P provides high film integrity, and good chemical resistance required for prolonged substrate protection.

Technical Data Sheet

SDS Sheets
Safety Data Sheet (Comp A)
Safety Data Sheet (Comp B)

Systems:

Features:

Contributes toward satisfying credit for low emitting material under LEED 4.1
Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017. (Compliance Certificates Available Upon Request)
Meets SCAQMD Rule 1113 for VOC content
Low emitting material
Low installation odor
Good Chemical & Abrasion Resistance
USDA & FDA Compliant
Anti-Microbial Agents are available as an option

Steri-Coat 200

Steri-Coat 200 offers the abrasion resistance and toughness inherent of urethanes. It also provides excellent resistance to UV discoloration and staining.

Technical Data Sheet

SDS Sheets
Safety Data Sheet (Comp A)
Safety Data Sheet (Comp B)

Features:

Class A Fire Rating
Meets SCAQMD Rule 1113 for VOC content
Low odor
Low VOCs
Excellent adhesion
Excellent chemical & abrasion resistance
Excellent stain resistance
Anti-Microbial Agents are available as an option
Soap & water clean up
Also available in satin

Shock-Crete

Urethane cements specifically designed for extreme temperatures of -350F- +400F, damp environments, FDA & USDA compliant workplaces. 1/8"-1/4" DFT.

APPLICATIONS

Commercial/Institutional Kitchens
Food Processing, Beverage Plants, Dairies, Breweries, Distilleries
Sewage & Water Treatment Plants
Pharmaceutical & Research Facilities
Animal Laboratories and Housing
Light & Heavy Manufacturing
High Traffic Areas (Aisleways, Loading Docks)
Laboratories
Printed Circuit Board Facilities

Shock-Crete HD

Liquid nitrogen resistant, trowel applied cementitious urethane mortar (1/4″-3/8″ / 6-10 mm). Contains antimicrobial additives that protect it from degradation caused by microorganisms. Demonstrates excellent resistance to thermal shock, mechanical damage, and chemical attack.

Technical Data Sheet
System Information Sheet
Safety Data Sheet (Part A)
Safety Data Sheet (Part B)
Safety Data Sheet (Filler)
Safety Data Sheet (Color Pack)

Features:

Unaffected by MVT (moisture vapor transmission)
Excellent chemical resistance
High abrasion resistance
Resistant to thermal shock
Withstands mechanical stress
Easy to clean and sterilize surface
Resistant to steam cleaning
Positive slip resistance
May be applied to “green" concrete
Ultra low VOC/odor
Suitable for use in USDA inspected facilities
Resistant to liquid nitrogen (Contact Dudick for recommendations when dealing with liquid nitrogen exposure)

Shock-Crete® HF

Highly functional trowel applied cementitious urethane mortar (1/4″-3/8″ / 6-10mm). Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms. Demonstrates excellent resistance to thermal shock, mechanical damage, and chemical attack.

Technical Data Sheet
System Information Sheet
Safety Data Sheet (Part A)
Safety Data Sheet (Part B)
Safety Data Sheet (Filler)

Features:

Unaffected by MVT (moisture vapor transmission)
Excellent chemical resistance
High abrasion resistance
Resistant to thermal shock
Withstands mechanical stress
Easy to clean and sterilize surface
Resistant to steam cleaning
Positive slip resistance
May be applied to “green" concrete
Ultra low VOC/odor
Suitable for use in USDA inspected facilities

Shock-Crete® IF

Exceptionally heavy duty, trowel applied cementitious urethane mortar (3/8″-1/2″ / 0.95-0.50cm). Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms. Demonstrates excellent resistance to mechanical damage, heavy machinery, thermal shock, and chemical attack.

Technical Data Sheet
System Information Sheet
Safety Data Sheet (Part A)
Safety Data Sheet (Part B)
Safety Data Sheet (Filler)

Features:

Iron filled for ultra durability
Unaffected by MVT (moisture vapor transmission)
High abrasion resistance
Resistant to thermal shock
Withstands high mechanical stress
Capable of withstanding stress from heavy machinery
Easy to clean and sterilize surface
Resistant to steam cleaning
Positive slip resistance
May be applied to “green" concrete
Ultra low VOC/odor
Suitable for use in USDA facilities

Shock-Crete® MD

An aggregate filled system that develops a cure strength approximately 2 times that of the concrete base to which it is applied. The monolithic topping exhibits excellent physical and mechanical strength and chemical resistance.

Technical Data Sheet
Safety Data Sheet (Part A)
Safety Data Sheet (Part B)
Safety Data Sheet (Filler)

Features:

Contributes toward satisfying credit for low emitting material under LEED 4.1
Meets California Department of Public Health CDPH/EHLB Standard Method Version 1.2 2017. Compliance Certificates Available Upon Request
Meets SCAQMD Rule 1113 for VOC content
Thermal Shock Resistant
Excellent Chemical Resistance
Low Odor
Fast Setting
Low Temperature Cure
FDA and USDA Compliant
Resistant to Steam Cleaning
Anti-Microbial Agents are available as an option
Anti-Skid Version Available
Coefficient of Thermal Expansion similar to concrete
VOC Compliant

Shock-Crete® SL2

Self-leveling base layer for use in cementitious urethane flooring systems (1/8-3/16″ / 0.32-0.48 cm). Flake, colored quartz, or sand can be broadcast in to create a more decorative flooring system. Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms. Demonstrates excellent resistance to thermal shock, mechanical damage, and chemical attack.

Technical Data Sheet
Safety Data Sheet (Part A)
Safety Data Sheet (Part B)
Safety Data Sheet (Filler)

Systems:

Features:

Unaffected by MVT (moisture vapor transmission)
Excellent chemical resistance
High abrasion resistance
Resistant to thermal shock
Withstands mechanical stress
Easy to clean and sterilize surface
Resistant to steam cleaning
Positive slip resistance
May be applied to “green" concrete
Ultra low VOC/odor
Suitable for use in USDA inspected facilities
Can be used in decorative flake or quartz systems

Shock-Crete® SR

Easy to apply highly functional slurry-broadcast base layer for use in cementitious urethane flooring systems (3/16-1/4″ / 0.48-0.64 cm). Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms. Demonstrates excellent resistance to thermal shock, mechanical damage, and chemical attack.

Technical Data Sheet
System Information Sheet
Safety Data Sheet (Part A)
Safety Data Sheet (Part B)
Safety Data Sheet (Filler)

Features:

Unaffected by MVT (moisture vapor transmission)
Excellent chemical resistance
High abrasion resistance
Resistant to thermal shock
Withstands higher mechanical stress
Easy to clean and sterilize surface
Resistant to steam cleaning
Positive slip resistance
May be applied to “green" concrete
Ultra low VOC/odor
Suitable for use in USDA inspected facilities

Shock-Crete® Topcoat

Polyurethane coating used as a topcoat for cementitious urethane flooring systems. Excellent primer for cementitious urethane systems due to outstanding resistance to moisture vapor transmission. Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms.

Technical Data Sheet
Safety Data Sheet (Part A)
Safety Data Sheet (Part B)
Safety Data Sheet (Filler)

Features:

Excellent chemical resistance
High abrasion resistance
Resistant to thermal shock
Excellent resistance to MVT (moisture vapor transmission)
Easy to clean and sterilize
Resistant to steam cleaning
Withstands high mechanical stress
Ultra low VOC/odor
Suitable for use in USDA inspected facilities

Shock-Crete® TCUV

Shock-Crete TCUV is a high performance, UV stable, semi-gloss topcoat for cementitious urethane floor systems. Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms.

Technical Data Sheet
Safety Data Sheet (Part A)
Safety Data Sheet (Part B)
Safety Data Sheet (Filler)

Features:

UV stable
Excellent chemical resistance
High abrasion resistance
Resistant to thermal shock
Excellent resistance to MVT (moisture vapor transmission)
Withstands mechanical stress
Ultra low VOC
Suitable for use in USDA inspected facilities.

Shock-Crete® Vertical

Cementitious cove base mortar that provides a durable finish for use with Shock-Crete flooring systems. Contains Polygiene® which has antimicrobial properties that protect it from degradation caused by microorganisms. Demonstrates excellent resistance to thermal shock, mechanical damage, and chemical attack.

Technical Data Sheet
Safety Data Sheet (Part A)
Safety Data Sheet (Part B)
Safety Data Sheet (Filler)

Features:

Excellent chemical resistance
Withstands high mechanical stress
High abrasion resistance
Easy to clean and sterilize surface
Resistant to thermal shock
Resistant to steam cleaning
Ultra low VOC/odor
Suitable for use in USDA inspected facilities