Commercial Roofing
Provides a visual and physical safety warning on roof top areas of caution and potential hazards.
Features
Use: Provides a visual and physical safety warning on roof top areas of caution and potential hazards including designation of the roof perimeter.
Material: 55 mil (1.40 mm) total thickness, comprised of 30 mil (0.76 mm) yellow non-reinforced TPO membrane laminated to 25 mil (0.64 mm) white cured seaming tape.
Colors: Yellow
10" wide 45 mil reinforced TPO membrane with factory-applied adhesive tape.
Features
Use: In lieu of half sheets to secure the roof membrane attachment beneath TPO or EPDM membrane and as additional membrane securement as specified in Johns Manville specifications and details.
Materials: 45 mil (1.14 mm) thick reinforced TPO (thermoplastic polyolefin) membrane with 30 mil (0.76 mm) thick, factory-applied peel and stick adhesive tape.
Color: White
6" wide, 45 mil reinforced TPO membrane with factory-applied adhesive tape.
Features
Use: To secure the field membrane at any angle change greater than 2 in/ft (167 mm/m). JM TPO 6" RTS can be used in lieu of fastening through the field membrane with screws and plates at angle changes.
Materials: 45 mil (1.14 mm) thick reinforced TPO (thermoplastic polyolefin) membrane with 30 mil (0.76 mm) thick, factory-applied peel and stick adhesive tape.
Color: White
62 mil reinforced, heat-weldable TPO membrane used to cover exposed discs or fasteners.
Features
Use: Primarily used to "strip in" flashing details, gravel stops, TPO coated metal joints, and exposed fasteners in the roof field.
Material: Flexible, 60 mil (1.52 mm) thick, reinforced TPO (thermoplastic polyolefin).
Color: White, Grey, and Tan
Features
Use: Primarily use to "strip-in" flashing details, gravel stops, PVC Coated Metal joints, and exposed fasteners in the roof field.
Material: 60 mil (1.52 mm) thick, reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy®* KEE (ketone ethylene ester).
Colors: 6" - Black/White, 8" - White/Grey and Sandstone/White
45 mil, reinforced, UV-resistant PVC with Elvaloy®* KEE safety warning line for roof perimeters.
Features
Use: Primarily used as a safety warning line for roof perimeters.
Material: 45 mil thick, reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy®* KEE (ketone ethylene ester).
* Elvaloy® KEE is a registered trademark of Dow.
Color: Yellow
Used to secure EPDM membrane from underneath in perimeters and corners.
Features
Use: To secure EPDM membrane from underneath in perimeters and corners and as additional securement as specified in Johns Manville specifications and details.
Materials: 10" (25.4 cm) wide, 45 mil (1.14 mm) thick, polyester scrim reinforced, cured EPDM strip with a factory-laminated, 3" (7.62 cm) self-adhering seam tape on each side.
Color: Black
Cured 6", 9" or 12" wide EPDM strip with a factory-applied pressure sensitive tape.
Features
Use: Provides additional reinforcing strength and moisture protection at the lap area of adjoining EPDM sheets, as well as sealing gravel stop flanges to EPDM membrane.
Materials: 45 mil (1.14 mm) thick, cured EPDM (ethylene propylene diene monomer) and factory-laminated, self-adhering seam tape.
Color: Black
6" wide, 45 mil strip with factory-applied pressure sensitive tape.
Features
Use: To secure field membrane at any angle change greater than 2 in/ft.
Materials: 6" (15.24 cm) wide, 45 mil (1.14 mm) thick, polyester scrim reinforced, cured EPDM strip with a factory-laminated, 3" (7.62 cm) self-adhering seam tape.
Color: Black
Provides a visual and physical safety warning on roof top areas of caution and potential hazards.
Features
Use: Provides a visual and physical safety warning on roof top areas of caution and potential hazards including designation of the roof perimeter.
Material: 55 mil (1.40 mm) total thickness, comprised of 30 mil (0.76 mm) yellow non-reinforced TPO membrane laminated to 25 mil (0.64 mm) white cured seaming tape.
Colors: Yellow
Here at Johns Manville, we provide the most complete product offering in the commercial roofing industry supported by numerous service groups to be there for you every step of the way.
Our core values are embedded in everything we do. We are people champions and thrive on our passion for going the extra mile. We perform at a superior level to give you the industry's best products, which protect your roofing systems today, to ensure that they last well into the future.
We are proud that Johns Manville has become synonymous with innovation and quality and are excited about continuing our legacy by working with you.
TPO Roofing Systems
JM TPO Fleece Backed Roofing Membrane has an integral polyester fleece backing that provides flexibility.
Features
Meets or exceeds the requirements of ASTM D 6878
Integral Polyester Fleece Backing: In-line application of fleece allows for stronger bond for polyester backing that gives more flexibility in varying susbtrates for mechanically fastened or adhered systems.
One of the Widest Melt Windows: Promotes better welds over a wider variety of speeds and temperatures, and leads to a softer, more flexible and workable sheet.
Reinforced fabric scrim layer and top-ply thickness: Lends to durable physical properties including:
Long-term weathering, UV resistance and heat-aging properties
High breaking and tearing strength
Optimized TPO Formulation: Delivers high-performance ozone resistance, cool roof reflectivity and overall weather resistance.
TPO Heavy-Fleece Backed Membrane for Hot Asphalt Application in hybrid systems. Installing a redundant, multi-ply, monolithic hybrid system ensures dependability, energy savings and lower maintenance costs.
Features
Meets or exceeds the requirements of ASTM D 6878
Integral Polyester Fleece Backing: In-line application of fleece allows for stronger bond for polyester backing that gives more flexibility in varying susbtrates for mechanically fastened or adhered systems.
One of the Widest Melt Windows: Promotes better welds over a wider variety of speeds and temperatures, and leads to a softer, more flexible and workable sheet.
Reinforced fabric scrim layer and top-ply thickness: Lends to durable physical properties including:
Long-term weathering, UV resistance and heat-aging properties
High breaking and tearing strength
Optimized TPO Formulation: Delivers high-performance ozone resistance, cool roof reflectivity and overall weather resistance.
JM TPO gives you a more cost-effective, yet highly reliable solution for your roofing projects. Our membranes are reinforced with a polyester fabric and manufactured with an ultraviolet-resistant thermoplastic polyolefin formulation. This combination provides you with extreme pliability, flexibility and weldability.
Features
Meets or exceeds the requirements of ASTM D 6878
Thickness Over Scrim: Optimized and tested on a continual basis with a state-of-the-art thickness gauge to verify that the thickness valued by our customers in incorporated into the sheet.
One of the Widest Melt Windows: Promotes better welds over a wider variety of speeds and temperatures, and leads to a softer, more flexible and workable sheet.
Reinforced Fabric Scrim Layer and Top-Ply Thickness: Lends to durable physical properties including:
Long-term weathering, UV resistance and heat-aging properties
High breaking and tearing strength
Optimized TPO Formulation: Delivers high-performance ozone resistance, cool roof reflectivity and overall weather resistance.
JM TPO SA (Self-Adhered) membranes can be installed up to three times faster than a traditional fully adhered application through the “peel and stick" technology of our factory-applied adhesive. TPO SA works great for installations that require little to no VOCs and may also have fewer weather restrictions than many traditional adhesive systems. JM TPO SA starts strong and stays strong for the full life of the roof.
Features
Meets or exceeds the requirements of ASTM D 6878
Thickness Over Scrim: Optimized and tested on a continual basis with a state-of-the-art thickness gauge to verify that the thickness valued by our customers is incorporated into the sheet.
One of the Widest Melt Windows: Promotes better welds over a wider variety of speeds and temperatures, and leads to a softer, more flexible and workable sheet.
Reinforced fabric scrim layer and top-ply thickness: Lends to durable physical properties including:
Long-term weathering, UV resistance and heat-aging properties
High breaking and tearing strength
Optimized TPO Formulation: Delivers high-performance ozone resistance, cool roof reflectivity, overall weather resistance.
Self-adhering capabilities: In a wide temperature range. Membrane can be adhered without the use of additional VOC containing adhesives.
TPO Accessories
Needle-punched, non-UV resistant polyester separation layer used for TPO, PVC, and EPDM mechanically fastened systems and ballasted EPDM systems.
Features
Use: JM 3 oz Polyester Slipsheet is intended for use as a separation layer between an existing roof system and a new single ply recover system.
Material: 3.0 oz/yd2 (102 g/m2 ) needle-punched, non UV-resistant polyester fabric.
Color: White
Polyester 9.0oz needle-punched UV-resistant fabric utilized as cushioning, separation or a protective layer for single ply systems.
Features
Use: JM Polyester Mat Protection Slipsheet is intended for use as a separation layer between extruded polystyrene insulation and roofing membrane in protected membrane (inverted) roof assemblies, as well as a separating sheet in some recover systems. It is also used as a protective layer between pavers and JM single ply membrane.
Material: 9.0 oz/yd2 (305.15 g/m2 ) needle-punched, UV-resistant polyester fabric.
Color: White
Provides a visual and physical safety warning on roof top areas of caution and potential hazards.
Features
Use: Provides a visual and physical safety warning on roof top areas of caution and potential hazards including designation of the roof perimeter.
Material: 55 mil (1.40 mm) total thickness, comprised of 30 mil (0.76 mm) yellow non-reinforced TPO membrane laminated to 25 mil (0.64 mm) white cured seaming tape.
Colors: Yellow
Nonreinforced JM TPO membrane laminated with galvanized steel to be fabricated into metal flashings and edge details.
Features
Use: Fabricated by the contractor into metal flashings and edge details. It is used to provide monolithic watertight protection for both adhered and mechanically fastened TPO roofing systems.
Materials: Non-reinforced JM TPO (thermoplastic polyolefin) membrane laminated to galvanized or stainless steel, or .040 Aluminum.
Colors: Grey, White, Tan
TPO cover tape is a flexible, non-reinforced TPO membrane used to strip-in metal flanges.
Features
Use: To strip in metal flanges on JM TPO Membrane systems or as directed by JM technical services.
Materials: 30 mil (0.76 mm) thick, non-reinforced TPO (thermoplastic polyolefin membrane with a 30 mil (0.76 mm) thick, factoryapplied peel and stick adhesive tape.
Colors: White, Grey, and Tan
JM TPO Curb Flashing is a 60 mil reinforced TPO membrane with an encapsulated edge used on curbs and parapet walls.
Features
Use: On curbs and parapet walls. This product eliminates the need for field cutting and edge sealant.
Materials: 60 mil (1.5 mm) thick, reinforced TPO (thermoplastic polyolefin) membrane, with an encapsulated edge.
Color: White, Grey, and Tan
Flexible, non-reinforced TPO membrane used to wrap pipes and vertical stacks.
Features
Use: To easily form flashings around corners and penetrations. Specifically designed for use in areas that cannot be properly detailed with TPO field membrane.
Material: Flexible, non-reinforced TPO (thermoplastic polyolefin).
Colors: White, Grey, and Tan
10" wide 45 mil reinforced TPO membrane with factory-applied adhesive tape.
Features
Use: In lieu of half sheets to secure the roof membrane attachment beneath TPO or EPDM membrane and as additional membrane securement as specified in Johns Manville specifications and details.
Materials: 45 mil (1.14 mm) thick reinforced TPO (thermoplastic polyolefin) membrane with 30 mil (0.76 mm) thick, factory-applied peel and stick adhesive tape.
Color: White
6" wide, 45 mil reinforced TPO membrane with factory-applied adhesive tape.
Features
Use: To secure the field membrane at any angle change greater than 2 in/ft (167 mm/m). JM TPO 6" RTS can be used in lieu of fastening through the field membrane with screws and plates at angle changes.
Materials: 45 mil (1.14 mm) thick reinforced TPO (thermoplastic polyolefin) membrane with 30 mil (0.76 mm) thick, factory-applied peel and stick adhesive tape.
Color: White
Two-piece, molded unit with a rounded base flange used to seal uneven or irregular penetrations.
Features
Use: Used to seal uneven penetrations through the membrane that are difficult to flash. The penetration pan is comprised of two pieces that allow for positioning around objects to be flashed. A welding tab is included to seal the penetration pan once positioned.
Material: Two-piece molded TPO (thermoplastic polyolefin) pocket with a rigid vertical wall and preformed flange.
Color: White
Flexible, non-reinforced TPO membrane used to flash vent stacks and round penetrations.
Features
Use: A smooth, cone-shaped boot, for traditional or split-pipe flashing applications to securely seal the penetration. Pipe boots eliminate the need for field fabrication.
Material: Flexible, smooth, non-reinforced TPO (thermoplastic polyolefin) cone-shaped boot with preformed flange.
Colors: White, Grey, and Tan
Flexible, nonreinforced TPO membrane applied to flash vent stacks and round penetrations.
Features
Use: A smooth cone-shaped boot, for traditional or split-pipe flashing applications to securely seal the penetration. Pipe boots eliminate the need for field fabrication.
Materials: Smooth, one-piece, molded TPO (thermoplastic polyolefin) cone-shaped boot with a preformed flange equipped with factory applied pressure sensitive tape.
Color: White
Designed for use as an inside corner or outside corner on all TPO thermoplastic roof systems.
Features
Use: A 60mil (1.5 mm) pre-molded accessory designed for use as an inside corner or outside corner on all TPO thermoplastic roof systems. Engineered for compatibility in most corner conditions, this injection molded accessory provides several installation benefits:
Efficient welding associated with corner flashing details
Reduced inconsistencies in flashing details
Consistent final appearance of flashing details at corner conditions
Application: Cut according to the diagram below for each application. Following final flashing membrane installation, hot-air weld and hand roll in either an inside corner or outside corner condition. No additional caulking or edge sealant is required.
Material: Pre-molded, non-reinforced TPO (thermoplastic polyolefin).
Colors: White
62 mil reinforced, heat-weldable TPO membrane used to cover exposed discs or fasteners.
Features
Use: Primarily used to "strip in" flashing details, gravel stops, TPO coated metal joints, and exposed fasteners in the roof field.
Material: Flexible, 60 mil (1.52 mm) thick, reinforced TPO (thermoplastic polyolefin).
Color: White, Grey, and Tan
JM TPO round split pipe boots are prefabricated, reinforced 60 mil JM TPO rounded to shape a pipe from 1" to 6" in diameter for flashing applications.
Features
Pipe boots minimize the need for field fabrication.
Custom sizes and colors are available upon request.
Contact your JM representative for minimum order quantity and lead time.
Provides a safe, stable and maintenance-free walkway for quick and easy access to rooftop equipment in high traffic areas.
Features
Use: Provides a safe, stable and maintenance-free walkway for quick and easy access to rooftop equipment in high traffic areas. The safety yellow color serves to provide a highly visible warning to areas of caution or hazards on the rooftop.
Material: 150 mil (3.81 mm) thick, textured non-reinforced TPO (thermoplastic polyolefin).
Color: Yellow
Flexible, nonreinforced TPO membrane used to cover joints, discs and fasteners on the membrane.
Features
Use: To seal seam laps where perimeter and/or header sheets intersect (T-joint) in TPO systems.
Material: Flexible, non-reinforced TPO (thermoplastic polyolefin).
Colors: White, Grey, Tan
Flexible, nonreinforced, waffle-patterned TPO membrane used around inside and outside corners.
Features
Use: Designed in a waffle pattern for easy installation around any inside and outside corner.
Material: Flexible, non-reinforced TPO (thermoplastic polyolefin).
Colors: White, Grey, and Tan
Textured, flexible TPO membrane intended for use as walkway material and protection around high-traffic areas.
Features
Use: Provides a safe, stable and maintenance-free walkway for quick and easy access to rooftop equipment in high traffic areas.
Material: 150 mil (3.81 mm) thick, textured non-reinforced TPO (thermoplastic polyolefin).
Color: Grey
Easily forms flashings around corners and penetrations that cannot be properly detailed with TPO membrane.
Features
Use: To easily form flashings around corners and penetrations. Specifically designed for use in areas that cannot be properly detailed with TPO membrane or where heat welding may not be practical.
Materials: 60 mil (1.52 mm) thick, uncured White EPDM with a release liner and a factory laminated, self-adhering White EPDM tape.
Colors: White
Easily forms flashing around corners and penetrations for specific TPO applications.
Features
Use: Use universally for either an inside or outside corner. Quick and easy to install.
Materials: 60 mil (1.52 mm) thick, uncured EPDM (ethylene propylenediene monomer) and a factory laminated, self-adhering EPDM tape.
Colors: White
Flexible, non-reinforced TPO membrane with a factory installed peel and stick tape for applications around penetrations.
Features
Use: A prefabricated, reinforced 60 mil JM TPO, square boot in 2" and 4" (5.08 cm and 10.16 cm) sizes for tube-flashing application. Pipe boots minimize the need for field fabrication. Custom sizes and colors are available upon request. Contact your JM representative for minimum order quantity and lead time.
Material: JM TPO 60 mil reinforced membrane, with one of the widest welding windows, that is factory fabricated into a one-piece square split-pipe boot.
Color: White
TPO Adhesives, Cements, Sealants
Adhesive for TPO and EPDM Membranes
JM All Season Sprayable Bonding Adhesive is an aerosol bonding adhesive that can be used for TPO and EPDM adhered roofing systems and wall flashings. The JM All Season adhesive complies to Low VOC requirements and is a contact adhesive requiring two-sided application. JM All Season Sprayable Bonding Adhesive can also be used as a primer for JM Self Adhered Vapor Barriers.
Features
Use: JM All Season Sprayable Bonding Adhesive is an aerosol bonding adhesive that can be used for TPO and EPDM adhered roofing systems and wall flashings. The JM All Season adhesive complies to Low VOC requirements and is a contact adhesive requiring twosided application. JM All Season Sprayable Bonding Adhesive can also be used as a Primer for JM Self Adhered Vapor Barriers.
Type: Two-sided sprayable aerosol adhesive for both warm and cold weather applications with fast drying properties in a pressurized canister.
Substrates: Compatible with the following field and wall applications/ boards/substrates: Polyisocyanurate; Invinsa Roof Board; ProtectoR HD board; gypsum; concrete; treated
TPO and EPDM Low VOC Adhesive
JM LVOC Membrane Adhesive is a one-part, low VOC synthetic polymer-based membrane adhesive.
Features
Use: For adhering JM TPO and JM EPDM membranes to approved substrates. Do not use on fleece-backed membranes at any time.
Type: One-part, low VOC synthetic polymer-based membrane adhesive.
Substrates: Compatible with approved insulations and cover boards, wood substrates, concrete, and light-weight concrete decks.
Color: Yellow
TPO and EPDM low VOC bonding adhesive
JM Membrane Bonding Adhesive is used for adhering JM TPO and EPDM membranes to approved substrates.
Features
Use: For adhering JM TPO and EPDM membranes to approved substrates. Do not use on fleece-backed membranes.
Type: One-part, synthetic polymer-based membrane adhesive, two-sided application.
Substrates: Compatible with insulation boards; metal, wood and other decking materials.
Color: Yellow
JM One-Part Pourable Sealer is used as a penetration pocket filler.
Features
Use: JM One-Part Pourable Sealer is used as a penetration pocket filler (Pour Application). One-Part Pourable Sealer can also be used as a liquid flashing for Single Ply membranes only (Brushed Application).
Type: One-part polyether sealant.
Color: White
Two-component polyurethane adhesive used for attaching insulation or cover boards to the single and multi-ply roofing systems.
JM One-Step Foamable Adhesive is a polyurethane adhesive for attaching insulation/cover boards to the roof deck or other insulation boards.
Features
Use: JM One-Step Foamable Adhesive is a two-component polyurethane adhesive used for attaching insulation or cover boards to the roof deck or to other insulation boards.
Type: Two-part, cold application insulation adhesive.
Substrates: Compatible with the following insulations (1), cover boards, and substrates: polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; structural concrete; lightweight insulating concrete; treated plywood (5/8" (1.58cm) min. thickness); cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection).
Ensure that all insulation boards are 4' x 4' or smaller.
Color: Part 1 - Tan, Part 2 - Colorless
Features:
Solvent free. Set boards immediately into adhesive; reduces installation time and maximizes adhesive footprint.
No hoses or pumps required.
Always on ratio, eliminates guesswork.
JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive.
RSUA Mini Cansiters available early May 2024.
Features
Use: JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive used for attaching fleece-backed single ply membranes to insulation boards or various deck types as well as insulation boards to the roof deck or to other insulation boards.
Type: Two-part, cold application insulation adhesive.
Substrates: Compatible with the following insulations, cover boards, and substrates1 : polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete2 (Lightweight structural, poured-in-place structural, precast, and insulating); treated plywood (5/8" (1.58 cm) min. thickness); cementitious wood fiber; gypsum; smooth or granulated BUR, APP or SBS.
Ensure that all insulation boards are 4' x 4' or smaller.
Ensure that the concrete is adequately dry for adhesion.
Color: Part 1 - Brown, Part 2 - Colorless, Combined/foamed adhesive - Light Amber
Features:
Solvent free, and HCFC or CFC free.
Universal adhesive for adhering fleece-backed membranes and insulation boards.
Sets in minutes.
Single Ply LVOC Caulk is used to seal flashing terminations, peel and stick products, and exposed edges of JM membrane cement splices.
Features
Type: One-part, elastomeric sealant
Colors: Black, White or Grey
Single Ply Membrane Cleaner is used to remove dirt, asphalt or other contaminants from JM TPO and PVC single ply membranes to ensure a good weld or bond. Can be used prior to applying TPO Membrane Primer for peel and stick applications.
Features
Type: One-part, low VOC solvent, membrane cleaning agent
Color: Clear
JM Single Ply Membrane Primer (LVOC) is a synthetic polymer-based Primer for JM TPO and EPDM Membrane surfaces.
Features
Use: To prime JM EPDM and TPO membrane surfaces for adhering EPDM or TPO peel and stick products. Additionally, it can be used with single ply liquid flashing products in EPDM applications.
Type: One-part, low VOC synthetic polymer-based membrane primer.
Color: Clear to Light Yellow
Single Ply Sealing Mastic is used to seal JM Single Ply membranes to terminations and other penetrations.
Features
Type: One-part, butyl polymer-based water cutoff mastic.
Substrates: Compatible with wood, concrete, metal, plastic, and other substrates for water penetration prevention.
Color: Grey
JM TPO 1168 Membrane Adhesive is used for adhering JM TPO and JM EPDM membranes to approved substrates. Do not use on fleece-backed membranes at any time.
Features
Type: One-part, 1168 Compliant*, low VOC synthetic polymerbased membrane adhesive.
Substrates: Compatible with approved insulations and cover boards, wood substrates, concrete, and light-weight concrete decks.
Color: Yellow
TPO LVOC Edge Sealant is used to seal cut edges of JM TPO membranes.
Features
Type: One-part, membrane edge sealing agent.
Colors: Clear (White available - not stocked)
TPO Membrane Cleaner is a one-part solvent cleaner used to remove dirt, asphalt or other contaminants from TPO membranes.
Features
Type: One-part solvent, membrane cleaning agent.
Color: Clear
JM TPO Membrane Primer is a one-part membrane primer used to prepare surface for adhering TPO peel-and-stick products.
Features
Use: To prime JM TPO Membrane surfaces for adhering TPO peel and stick products.
Type: One-part, synthetic polymer-based membrane primer
Color: Clear to Light Yellow
TPO pourable sealer is used to fill penetration pockets on TPO roofing systems.
Features
Type: Two-part polyurethane sealant
Colors:
Part A: White
Part B: Black
JM TPO Water Based Membrane Adhesive is a polymeric adhesive designed for bonding TPO membranes to approved roofing substrates.
Features
Use: For adhering JM TPO membranes to approved substrates. Limited availability from October 1st to April 15th.
Type: One-part, water based membrane adhesive.
Substrates: Compatible with approved insulations and cover boards, and concrete decks.
Colors: Bright blue when wet and adhering one-sided horizontal application, and dark green when ready to adhere for two-sided vertical application. See Installation/Application for a visual guide to colors.
JM Two-Part Pourable Sealer is a two-part sealant used as a penetration pocket filler.
Features
Use: JM Two-Part Pourable Sealer is used as a penetration pocket filler.
Type: Two-part polyether sealant.
Colors:
Part A: Tan
Part B: Black
JM Two-Part UIA is a Two-part cold-application adhesive used to adhere insulation board products to approved roofing substrates, and insulation to insulation.
Features
Type: Two-part, cold application insulation adhesive
Substrates: Compatible with the following insulations, cover boards, and substrates: polyisocyanurate; HD wood fiber; perlite; HD Polyiso; gypsum; concrete; treated plywood; cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection)
Color: Pink
Features: No primers or catalysts are required for application. May be used in single ply and bituminous systems.
JM Two-Part Urethane Insulation Adhesive (UIA) Canister is a two-component polyurethane adhesive used for attaching fleece-backed membranes to insulation and insulation boards to the roof deck or to other insulation boards.
Features
Use: For bonding fleece-backed singly ply, insulation and cover boards.
Type: Self-contained two-part, low-rise foam adhesive.
Substrates: Compatible with the following: insulations, cover boards, and substrates: fleece-backed TPO, fleece-backed PVC, polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete; treated plywood; cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection).
Color: Pink
JM Weathered Membrane Cleaner cleans the release agent and dirt from JM TPO and JM EPDM membranes.
Features
Use: To thoroughly clean the release agent and dirt from JM TPO and JM EPDM membranes prior to applying primers or splice adhesives.
Type: One-part, organic solvent cleaning agent.
Color: Clear
SA Primer is composed of SBS synthetic rubbers, adhesive enhancing resins and volatile solvents.
Features
Use: Designed to enhance the adhesion of self-adhering membranes on approved substrates.
Type: One-part, specification grade, penetrating priming solution.
Substrates: Compatible with gypsum; concrete; fiber cement; wood; and metal surfaces.
Color: Red
Features: Sprayable, ideal for self-adhering membranes, achieves a tenacious bond to a variety of substrates.
SA Primer Low VOC is composed of SBS synthetic rubber and adhesive-enhancing resins.
Features
Use: Designed to enhance the adhesion of self-adhering membranes on approved substrates.
Type: One-part, specification grade, penetrating priming solution.
Substrates: Compatible with gypsum; concrete; fiber cement; wood; and metal surfaces.
Color: Red
Features: Low VOC, Sprayable, ideal for self-adhering membranes, achieves a tenacious bond to a variety of substrates.
TPO Insulation and Cover Boards
DEXcell Cement Roof Board is a cover board that is able to withstand prolonged exposure to moisture and meets FM Class 1 fire barrier requirements.
Features
Meets the requirements of ASTM C 1325
Durability: Composed of a lightweight cementicious core to provide exceptional impact resistance.
Strength: Exceptionally high compressive strength improves overall roof system performance. Cement board is able to withstand prolonged exposure to moisture and is ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics.
Moisture and Mold Resistance: Cement based core provides superior moisture, mold, and mildew resistance. Scores a maximum "10" for mold resistance when tested per ASTM D 3273.
DEXcell FA Glass Mat Roof Board is a cover board with a heavy duty coated fiber glass facer. It is moister and mold resistant and meets FM Class 1 fire barrier requirements.
Features
Meets the requirements of ASTM C 1177
Handleability: Heavy duty coated fiber glass facer ideal for fully adhered systems improves handling and strength. Scores and snaps easily.
Strength: High compressive strength improves overall roof system performance. Ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Enhanced mold resistant core and coated fiberglass facers provide mold and mildew resistance per ASTM-D 3273.
DEXcell Glass-Mat Roof Board is a gypsum cover board that can be used in mechanically fastened single ply systems.
Features
Meets the requirements of ASTM C 1177
Handleability: Coated fiberglass facer ideal for mechanically fastened systems improves handling and strength. Scores and snaps easily.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Enhanced mold resistant core and coated fiberglass facers provide mold and mildew resistance per ASTM-D 3273.
DEXcell® FA VSH Glass Mat Roof Board is competitively priced, easier to install and very severe hail strong to withstand the harshest conditions over the long haul.
Features
Meets the requirements of ASTM C 1177
Handleability: Heavy duty coated fiberglass facer ideal for fully adhered systems improves handling and strength. Scores and snaps easily.
Strength: High compressive strength improves overall roof system performance. Ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Enhanced mold resistant core and coated fiberglass facers provide mold and mildew resistance per ASTM-D 3273.
DensDeck Prime Roof Board is a gypsum cover board with an enhanced coated glass mat facer
Features
Meets the requirements of ASTM C 1177
Enhanced Face Mat: Coated fiberglass facer ideal for fully adhered systems provides a broader compatibility and higher performance with roofing adhesives.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
DensDeck Roof Board is a gypsum cover board with a glass mat facer.
Features
Meets the requirements of ASTM C 1177
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Scores a 10, the highest performance level for mold resistance, when tested in accordance with ASTM D 3273.
DensDeck StormX Prime Roof Board contains an enhanced coated glass mat facer and achieves FM's VSH approval in select JM TPO systems.
Features
Meets the requirements of ASTM C 1177
Very Severe Hail: Achieves FM 'VSH' approval with adhered 60 or 80 mil (smooth back) JM TPO membrane and standard JM TPO membrane adhesives when 4x4' panels are adhered in low rise foam adhesive ribbons, 12" OC min.
Enhanced Face Mat: Coated fiberglass facer ideal for fully adhered systems provides a broader compatibility and higher performance with roofing adhesives.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
ENRGY 3 is a closed-cell polyisocyanurate foam core insulation board offering a high R-value to keep your building well insulated from the elements.
Features
Meets the following requirements: ENRGY 3 / Tapered ENRGY 3
• CAN/ULC S704, Type 2, Class 3 (140 kPa)
• ASTM C 1289, Type II, Class 1, Grade 2 ENRGY 3 25 PSI / Tapered ENRGY 3 25 PSI
• CAN/ULC S704, Type 3, Class 3 (170 kPa)
• ASTM C 1289, Type II, Class 1, Grade 3
Glass-Reinforced Facers: Provides rigidity and resistance to indentation and crushing, and are compatible with BUR, modified bitumen and single ply membrane systems.
Closed Cell Polyisocyanurate Foam Core: Provides high R-value per inch in built-up, modified bitumen, metal roof and single ply roof systems, and approved for direct application to steel decks.
ENRGY 3 CGF is a closed-cell polyisocyanurate foam core with an inorganic-coated glass facer on each side. It offers high R-value per inch and achieves a UL Class A approval in select systems.
Features
Meets the following requirements: ENRGY 3 CGF / Tapered ENRGY 3 CGF
• CAN/ULC S704, Type 2, Class 3 (140 kPa)
• ASTM C 1289, Type II, Class 2, Grade 2 ENRGY 3 25 PSI CGF / Tapered ENRGY 3 25 PSI CGF
• CAN/ULC S704, Type 3, Class 3 (170 kPa)
• ASTM C 1289, Type II, Class 2, Grade 3
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in fully adhered single ply systems.
Closed Cell Polyisocyanurate Foam Core: Provides high R-value per inch in built-up, modified bitumen, metal roof and single ply roof systems, and utilizes an environmentally compliant blowing agent that provides high thermal insulation performance.
Fire Resistance: Achieves UL Class A approval directly over a combustible wood deck up to 1/2:12" slope.
1/2" High-Density Polyiso Cover Board
ENRGY 3® HD is a closed cell polyisocyanurate foam technology provides additional insulation value (R-value of 2.5), with lightweight and high density characteristics.
Features
Glass-Reinforced Facers: Provides rigidity and resistance to indentation and crushing, and are compatible with modified bitumen and single ply membrane systems.
Lightweight: Offers labor and installation efficiencies and allows more options for situations where the overall weight is a concern. This also means easy hoisting, staging and maneuvering around the roof.
High R-Value (2.5 R): Provides significantly more thermal insulation (R-value) than wood fiber or gypsum boards.
User Friendly: ENRGY 3 HD allows easy & efficient scoring, cutting and snapping which permits fast, tight fabrication and all in a low dust environment.
Resistance To Damage: High impact, and compressive strength provides a protective layer for insulation while working with the membrane above to ensure maximum performance and longevity
ProtectoR HD is a high-density polyiso cover board that provides excellent resistance against harsh rooftop conditions including hail, wind uplift, puncture and moisture.
Features
Meets the requirements of ASTM C 1289, Type II, Class 4, Grade 1
High-Density Polyisocyanurate Foam Core: Closed cell polyisocyanurate foam technology provides additional insulation value (R-value of 2.5), with lightweight and low water absorption characteristics.
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in adhered single ply systems.
Lightweight: Offers labor and installation efficiencies and allows more options for situations where the overall weight is a concern. This also means easy hoisting, staging and maneuvering around the roof.
User Friendly: ProtectoR HD allows easy & efficient scoring, cutting and snapping which permits fast, tight fabrication and all in a low dust environment.
High R-Value (2.5 R): Provides significantly more thermal insulation (R-value) than wood fiber or gypsum boards.
Resistance To Damage: High impact, flexural and compressive strength provides a protective layer for insulation while working with the membrane above to ensure maximum performance and longevity.
Up to 50% Fewer Fasteners: Achieves FM 1-90 utilizing 8 fasteners per 4'x 8' board with an adhered reinforced membrane and 11 fasteners per 4'x 8' board with an adhered non-reinforced membrane over a min. 22 ga steel deck or structural concrete deck.
Fire Resistance: Achieves UL Class A approval directly over a combustible wood deck up to 1/2:12" slope.
RetroPlus Roof Board is a high-density, expanded, perlite-based cover board engineered to optimize system performance across all applications.
Features
Meets the requirements of ASTM C 728, Type 3
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive adhesive absorption in hot-asphalt and cold applied roofing systems, and to provide a strong surface for bonding bituminous membranes.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and superior fire resistance.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
High Density: Provides additional strength and durability over 1/2" Retro-Fit Board with low moisture content and water resistance compared to wood fiber board.
SECUROCK Cement Roof Board is ideal for liquid applied membrane roof systems. It has superior wind-uplift performance for a wide variety of roof assemblies and excellent fire performance.
Features
Meets the requirements of ASTM C 1325
Strength: Engineered to provide superior wind-uplift performance for a wide variety of roof assemblies. The board is formed using an aggregated portland cement slurry with a polymer-coated, glass-fiber mesh completely encompassing edges and both surfaces, to enhance bond strength of membrane systems and gives excellent resistance to delamination.
Fire Performance: Provides excellent fire performance with unlimited slope classifications and is non-combustable per UL 790.
Moisture and Mold Resistance: Cement based, highly water durable board, scored a maximum "10" for mold resistance when tested per ASTM D 3273.
SECUROCK Gypsum-Fiber Roof Board contains a integral water-resistant core and has excellent fire performance.
Features
Meets the requirements of ASTM C 1278
Strength: Engineered to provide high wind-uplift performance. Uniform composition providing enhanced bond strength of membrane systems with no risk of facer delamination.
Fire Performance: Provides excellent fire performance, and demonstrates exceptional surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Integral water-resistant core scored a maximum "10" for mold resistance when tested per ASTM D 3273.
SECUROCK Ultralight Glass-Mat Roof Board is a gypsum cover board with fiber glass facer and back.
Features
Meets the requirements of ASTM C 1177
Handleability: Unmatched mat-to-core tensile bond strength, easy to cut and has reduced facer delamination.
Fire Performance: Provides excellent fire performance, and demonstrates exceptional surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Fiber glass facer and back with treated core delivers moisture and mildew resistance.
SeparatoR provides an economical solution for mechanically fastened single ply membrane recover applications while adding thermal insulation value to your building.
Features
Meets the requirements of ASTM C 1289, Type II, Class 1, Grade 2
Closed Cell Polyisocyanurate Foam Core: Provides high R-value per inch, light weight, and flexibility in recover and metal retrofit applications
Glass-Reinforced Facers: Provides rigidity and resistance to indentation and crushing for mechanically fastened single ply membrane systems.
High R-Value (2.8 R): ½" SeparatoR Board has more than two times the R-value of wood fiber or gypsum boards.
SeparatoR CGF is a versatile, ½"-thick cover board solution that is designed for re-cover applications and offers performance and value.
Features
Meets the requirements of ASTM C 1289, Type II, Class 2, Grade 3
Closed Cell Polyisocyanurate Foam Core: Closed cell polyisocyanurate foam technology provides additional insulation value with lightweight and low water absorption characteristics.
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in adhered single ply systems.
High R-Value (2.9 R): Has more than two times the R-value of wood fiber and more than four times the R-value of gypsum boards.
User Friendly: Allows easy and efficient scoring, cutting and snapping which permits fast, tight fabrication and all in a low dust environment.
Lightweight: Offers labor and installation efficiencies and allows more options for situations where the overall weight is a concern. This also means easy hoisting, staging and maneuvering around the roof.
Up to 50% Fewer Fasteners: Achieves FM 1-90 utilizing 8 fasteners per 4'x 8' board with an adhered reinforced membrane and 11 fastners per 4'x 8' board with an adhered non-reinforced membrane over a min. 22 ga steel deck or structural concrete deck.
Fire Resistance: Achieves UL Class A approval directly over a combustible wood deck up to 1/2:12" slope.
TPO Specialty Fasteners
JM VSH Plates are 2.2" round heavy duty reinforced polymer plates with barbs utilized for in seam single ply membrane securement, and cover board preliminary securement of Very Severe Hail rated single ply membrane systems.
Features
Use: Single Ply Membranes & Cover Boards
Material: High Strength Reinforced Polymer
Size: JM VSH Plate - 2.2" (5.588 cm) round
Color: Black
PVC Roofing Systems
JM PVC with KEE FB is a heat weldable thermoplastic membrane that utilizes a Spunbond 3.8 oz. fleece creating an extremely durable, strong yet light and flexible protection layer.
Features
Meets the requirements of ASTM D 4434, Type III
Advanced Solid Phase Polymer Formulation: Uses the optimal amount of Dow™ Elvaloy® KEE (Ketone Ethylene Ester) polymer to ensure plasticizer retention, extend roof life, and to reduce maintenance costs.
* Elvaloy® KEE is a registered trademark of Dow.
Patented Aramid-Reinforced Edge: Aramid fiber is woven into the fastening side of all full rolls of PVC membrane.
Spunbond 3.8 oz. Polyester Fleece Back Mat: Interlocking, multiplelayer, uniformly arranged continuous filament strands are needle punched with thousands of barbed needles, creating an extremely durable, strong yet light and flexible protection layer.
Non-wicking Reinforced Polyester Scrim: Our fully integrated manufacturing process adds tensile strength and toughness. Due to the non-wicking edge sealant is not required.
Excellent Chemical Resistance: JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.
JM PVC SD Plus is a heat weldable thermoplastic polyvinyl chloride membrane available in 50, 60, and 80 mil.
Features
Meets the requirements of ASTM D 4434, Type III
Non-wicking Reinforced Polyester Scrim: Our fully integrated manufacturing process adds tensile strength and toughness. Edge sealant is not a requirement for cut edges.
Patented Aramid-Reinforced Edge: Aramid fiber is woven into the fastening side of all full rolls of PVC membrane.
Excellent Chemical Resistance: JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.
Energy Savings: The white membranes provide exceptional reflectivity and emissivity for energy savings.
Color: White, Grey*
*All colors not available as standard stocked items in all size configurations. Please call for minimums and lead times.
JM PVC SD Plus FB is a fleece-backed PVC membrane with reinforced polyester scrim, providing strength and toughness. It is resistant to oils and fuels, with white membranes offering energy savings. It features a patented Aramid-Reinforced Edge and a Spunbond 3.8 oz. Polyester Fleece Back Mat for durability and flexibility.
Features
Non-wicking Reinforced Polyester Scrim: Our fully integrated manufacturing process adds tensile strength and toughness. Due to the non-wicking edge sealant is not required.
Excellent Chemical Resistance: JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.
Energy Savings: The white membranes provide exceptional reflectivity and emissivity for energy savings.
Patented Aramid-Reinforced Edge: Aramid fiber is woven into the fastening side of PVC membrane.
Spunbond 3.8 oz. Polyester Fleece Back Mat: Interlocking, multiple-layer, uniformly arranged continuous filament strands are needle punched with thousands of barbed needles, creating an extremely durable, strong yet light and flexible protection layer.
Color: White, Grey
JM PVC with the optimal amount of Elvaloy®* KEE is a heat weldable polyvinyl chloride thermoplastic membrane that provides superior resistance against oil, fuels, and other hard chemicals.
Features
Meets the requirements of ASTM D 4434, Type III
Advanced Solid Phase Polymer Formulation: Uses the optimal amount of Elvaloy® KEE (Ketone Ethylene Ester) polymer to ensure plasticizer retention, extend roof life, and reduce maintenance costs.
* Elvaloy® KEE is a registered trademark of Dow.
Patented Aramid-Reinforced Edge: Aramid fiber is woven into the fastening side of all full rolls of PVC membrane.
Non-wicking Reinforced Polyester Scrim: Our fully integrated manufacturing process adds tensile strength and toughness. Due to the non-wicking edge, sealant is not required.
Excellent Chemical Resistance: JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.
Energy Savings: White, Grey ES, and Sandstone ES membranes provide exceptional reflectivity and emissivity for energy savings.
JM PVC with Elvaloy®* KEE MIN is a heat weldable thermoplastic membrane with a minimum thickness of either 60 or 72 mils.
Features
Meets the requirements of ASTM D 4434, Type III
Advanced Solid Phase Polymer Formulation: Uses the optimal amount of Elvaloy®* KEE (Ketone Ethylene Ester) polymer to: Ensure plasticizer retention; Extend roof life (exceeds 39,000 hours of accelerated weathering testing (ASTM G 154 requires 5,000 hours); and to reduce maintenance cost.
* Elvaloy® KEE is a registered trademark of Dow.
Patented Aramid-Reinforced Edge: Aramid fiber is woven into the fastening side of all full rolls of PVC membrane.
Non-wicking Reinforced Polyester Scrim: Our fully integrated manufacturing process adds tensile strength and toughness. Due to the non-wicking edge, sealant is not required.
Excellent Chemical Resistance: JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.
Energy Savings: White membranes provides exceptional reflectivity and emissivity for energy savings.
PVC Accessories
Needle-punched, non-UV resistant polyester separation layer used for TPO, PVC, and EPDM mechanically fastened systems and ballasted EPDM systems.
Features
Use: JM 3 oz Polyester Slipsheet is intended for use as a separation layer between an existing roof system and a new single ply recover system.
Material: 3.0 oz/yd2 (102 g/m2 ) needle-punched, non UV-resistant polyester fabric.
Color: White
JM PVC membrane laminated with galvanized steel or aluminum to be fabricated into metal flashings and edge details.
Features
Use: Fabricated by the contractor into metal flashings and edge details. It is used to provide monolithic water-tight protection for both adhered and mechanically fastened roofing assemblies.
Materials: 20 mil (0.51 mm) UV-resistant PVC (polyvinyl chloride) with Elvaloy®* KEE (ketone ethylene ester) membrane laminated to 24 gauge (0.6 mm) galvanized steel or .040 Aluminum.
* Elvaloy® KEE is a registered trademark of Dow.
Colors: White, Grey, Sandstone, and Black
JM PVC Detail Membrane is a flexible, nonreinforced thermoplastic membrane used to wrap pipes and vertical stacks.
Features
Use: To easily form flashings around corners and penetrations. Specifically designed for use in areas that cannot be properly detailed with PVC field membrane.
Material: 75 mil (1.91 mm) thick, reversible, flexible, non-reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy® KEE (ketone ethylene ester).
* Elvaloy® KEE is a registered trademark of Dow.
Colors: White/Grey, Grey ES/White, Sandstone/White, Sandstone ES/White, White/Charcoal
Features
Use: Primarily use to "strip-in" flashing details, gravel stops, PVC Coated Metal joints, and exposed fasteners in the roof field.
Material: 60 mil (1.52 mm) thick, reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy®* KEE (ketone ethylene ester).
Colors: 6" - Black/White, 8" - White/Grey and Sandstone/White
150 mil, textured, reinforced thermoplastic membrane for use on and around areas of high foot traffic.
Features
Use: Provide a safe, stable and maintenance-free walkway for quick and easy access to rooftop equipment in high traffic areas.
Material: 150 mil (3.81 mm) thick, textured, reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy®* KEE (ketone ethylene ester).
* Elvaloy® KEE is a registered trademark of Dow.
Colors: Safety Yellow
One-piece molded unit with a square base flange used to seal uneven difficult-to-flash membrane penetrations.
Features
Use: Unit used to seal uneven penetrations through the membrane that are difficult to flash. The penetration pan is slit on one side to allow for positioning around objects to be flashed. A welding tab is included to seal the penetration pan once installed.
Material: 125 mil (3.18 mm) thick, one piece molded unit, vacuum-formed and fabricated from impact-resistant rigid PVC (polyvinyl chloride).
Colors: Grey
Flexible, nonreinforced thermoplastic membrane used to flash vent stacks and round penetrations.
Features
Use: A smooth, cone-shaped boot for traditional or split-pipe flashing applications to securely seal the penetration. Pipe boots eliminate the need for field fabrication.
Material: Flexible, non-reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy®* KEE (ketone ethylene ester). * Elvaloy is a registered trademark of Dow.
Colors: White, Grey, and Sandstone
Preformed, nonreinforced, extruded, heat-weldable standing seam roofing accessory used as a decorative rib.
Features
Use: Used as a decorative rib to simulate the aesthetics of a standing seam metal roof. This accessory is for use on fully adhered JM PVC and JM PVC SD Plus roofing systems with 60 mil or greater membranes.
Material: UV-resistant PVC (polyvinyl chloride) and an Elvaloy®* KEE (ketone ethylene ester). Preformed, non-reinforced, extruded, and heat-weldable.
* Elvaloy® KEE is a registered trademark of Dow.
Colors: White, Sandstone, and Grey
45 mil, reinforced, UV-resistant PVC with Elvaloy®* KEE safety warning line for roof perimeters.
Features
Use: Primarily used as a safety warning line for roof perimeters.
Material: 45 mil thick, reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy®* KEE (ketone ethylene ester).
* Elvaloy® KEE is a registered trademark of Dow.
Color: Yellow
Fabricated from reinforced 60 MIL JM PVC. Used to flash vent stacks and other square penetrations.
Features
Use: A prefabricated, reinforced 60 mil JM PVC (KEE), round-shaped 1" to 6" (2.54 cm to 15.24 cm) split-pipe boot for flashing application. Pipe boots minimize the need for field fabrication. Custom sizes and colors are available upon request. Contact your JM representative for minimum order quantity and lead time.
Material: JM PVC 60 mil reinforced membrane containing the optimal amount of Elvaloy®* KEE (Ketone Ethylene Ester) that is factory fabricated into a onepiece round split-pipe boot.
* Elvaloy® KEE is a registered trademark of Dow.
Color: White
Flexible, nonreinforced thermoplastic material used to cover joints, discs and fasteners in the membrane.
Features
Use: To seal seam laps where perimeter and/or header sheets intersect (T-Joint) in PVC systems.
Material: Flexible, non-reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy®* KEE (ketone ethylene ester).
* Elvaloy® KEE is a registered trademark of Dow.
Colors: White, Grey, and Sandstone
Flexible, nonreinforced, waffle-patterned thermoplastic membrane.
Features
Use: Designed in a waffle pattern for easy installation around any inside and outside corners.
Material: Flexible, non-reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy®* KEE (ketone ethylene ester).
* Elvaloy® KEE is a registered trademark of Dow.
Colors: White, Grey, and Sandstone
Polyester 9.0oz needle-punched UV-resistant fabric utilized as cushioning, separation or a protective layer for single ply systems.
Features
Use: JM Polyester Mat Protection Slipsheet is intended for use as a separation layer between extruded polystyrene insulation and roofing membrane in protected membrane (inverted) roof assemblies, as well as a separating sheet in some recover systems. It is also used as a protective layer between pavers and JM single ply membrane.
Material: 9.0 oz/yd2 (305.15 g/m2 ) needle-punched, UV-resistant polyester fabric.
Color: White
Fabricated from reinforced 60 MIL JM PVC. Used to flash vent stacks and other square penetrations.
Features
Use: A prefabricated, reinforced 60 mil JM PVC (KEE) square boot in 2" and 4" (5.08 cm and 10.16 cm) sizes for tube-flashing application. Pipe boots minimize the need for field fabrication. Custom sizes and colors are available upon request. Contact your JM representative for minimum order quantity and lead time.
Material: JM PVC 60 mil reinforced membrane containing the optimal amount of Elvaloy®* KEE (Ketone Ethylene Ester) that is factory fabricated into a one-piece square split-pipe boot.
* Elvaloy® KEE is a registered trademark of Dow.
Color: White
Flexible, polyester-reinforced thermoplastic membrane intended for use as protection around high-traffic areas.
Features
Use: Provides a safe, stable and maintenance-free walkway for quick and easy access to rooftop equipment in high traffic areas.
Material: 72 mil (1.83 mm) thick, textured, reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy®* KEE (Ketone Ethylene Ester).
*Elvaloy is a registered trademark of Dow.
Color: Grey
PVC Adhesives, Cements, Sealants
JM EPDM/PVC Pourable Sealer is a sealant for EPDM Peel & Stick Pourable Sealer Pockets or PVC systems to seal irregular penetrations.
Features
Use: JM EPDM/PVC Pourable Sealer is used as a penetration pocket filler.
Type: Two-part polyurethane sealant.
Colors:
Part A: Black
Part B: Amber
JM One-Part Pourable Sealer is used as a penetration pocket filler.
Features
Use: JM One-Part Pourable Sealer is used as a penetration pocket filler (Pour Application). One-Part Pourable Sealer can also be used as a liquid flashing for Single Ply membranes only (Brushed Application).
Type: One-part polyether sealant.
Color: White
JM One-Step Foamable Adhesive is a polyurethane adhesive for attaching insulation/cover boards to the roof deck or other insulation boards.
Features
Use: JM One-Step Foamable Adhesive is a two-component polyurethane adhesive used for attaching insulation or cover boards to the roof deck or to other insulation boards.
Type: Two-part, cold application insulation adhesive.
Substrates: Compatible with the following insulations (1), cover boards, and substrates: polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; structural concrete; lightweight insulating concrete; treated plywood (5/8" (1.58cm) min. thickness); cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection).
Ensure that all insulation boards are 4' x 4' or smaller.
Color: Part 1 - Tan, Part 2 - Colorless
Features:
Solvent free. Set boards immediately into adhesive; reduces installation time and maximizes adhesive footprint.
No hoses or pumps required.
Always on ratio, eliminates guesswork.
JM PVC All Season Sprayable Bonding Adhesive is an aerosol bonding adhesive that can be used for PVC adhered roofing systems and wall flashings. The JM PVC All Season adhesive complies to Low VOC requirements and is a contact adhesive requiring two-sided application.
Features
Use: JM PVC All Season Sprayable Bonding Adhesive is an aerosol bonding adhesive that can be used for PVC adhered roofing systems and wall flashings. The JM PVC All Season adhesive complies to Low VOC requirements and is a contact adhesive requiring two-sided application. It can be used with both JM PVC and JM PVC SD Plus membranes.
Type: Two-sided sprayable aerosol adhesive for both warm and cold weather applications with fast drying properties in a pressurized canister.
Substrates: Compatible with the following field and wall applications/boards/substrates: Polyisocyanurate; Invinsa® Roof Board; ProtectoR® HD board; gypsum; concrete; treated plywood, cement board.
Color: Light blue
JM PVC Edge Sealant is a liquid thermoplastic compound placed at the edge of PVC membrane seams.
Features
Use: To seal edges of JM PVC membrane seams after the membrane has been welded to itself or to JM PVC-Coated Metal.
Type: One-part, membrane edge sealing agent.
Color: Clear
JM PVC Membrane Adhesive LVOC is a polymer-based adhesive for adhering smooth-backed PVC membranes to approved substrates.
Features
Use: For adhering JM PVC membranes to approved substrates. Do not use on fleece-backed membranes
Type: One-part, synthetic polymer-based membrane adhesive.
Substrates: Compatible with approved insulations and cover boards, wood substrates, concrete, and light-weight concrete decks
Color: Amber
Our JM PVC Water Based Membrane Adhesive allows for great vertical-wall application, offers a color change indicator, and new and improved spreadability to be used to adhere JM PVC membranes.
Features
Use: For adhering JM PVC membranes to approved substrates. Limited availability from October 1st to April 15th.
See Bulletin for additional information.
Type: One-part, water based membrane adhesive.
Substrates: Compatible with approved insulations and cover boards, and concrete decks.
Colors: Bright blue when wet, and dark green when ready to adhere. See Installation/Application for a visual guide to colors.
JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive.
RSUA Mini Cansiters available early May 2024.
Features
Use: JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive used for attaching fleece-backed single ply membranes to insulation boards or various deck types as well as insulation boards to the roof deck or to other insulation boards.
Type: Two-part, cold application insulation adhesive.
Substrates: Compatible with the following insulations, cover boards, and substrates1 : polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete2 (Lightweight structural, poured-in-place structural, precast, and insulating); treated plywood (5/8" (1.58 cm) min. thickness); cementitious wood fiber; gypsum; smooth or granulated BUR, APP or SBS.
Ensure that all insulation boards are 4' x 4' or smaller.
Ensure that the concrete is adequately dry for adhesion.
Color: Part 1 - Brown, Part 2 - Colorless, Combined/foamed adhesive - Light Amber
Features:
Solvent free, and HCFC or CFC free.
Universal adhesive for adhering fleece-backed membranes and insulation boards.
Sets in minutes.
Single Ply LVOC Caulk is used to seal flashing terminations, peel and stick products, and exposed edges of JM membrane cement splices.
Features
Type: One-part, elastomeric sealant
Colors: Black, White or Grey
Single Ply Membrane Cleaner is used to remove dirt, asphalt or other contaminants from JM TPO and PVC single ply membranes to ensure a good weld or bond. Can be used prior to applying TPO Membrane Primer for peel and stick applications.
Features
Type: One-part, low VOC solvent, membrane cleaning agent
Color: Clear
Single Ply Sealing Mastic is used to seal JM Single Ply membranes to terminations and other penetrations.
Features
Type: One-part, butyl polymer-based water cutoff mastic.
Substrates: Compatible with wood, concrete, metal, plastic, and other substrates for water penetration prevention.
Color: Grey
JM Two-Part Pourable Sealer is a two-part sealant used as a penetration pocket filler.
Features
Use: JM Two-Part Pourable Sealer is used as a penetration pocket filler.
Type: Two-part polyether sealant.
Colors:
Part A: Tan
Part B: Black
JM Two-Part UIA is a Two-part cold-application adhesive used to adhere insulation board products to approved roofing substrates, and insulation to insulation.
Features
Type: Two-part, cold application insulation adhesive
Substrates: Compatible with the following insulations, cover boards, and substrates: polyisocyanurate; HD wood fiber; perlite; HD Polyiso; gypsum; concrete; treated plywood; cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection)
Color: Pink
Features: No primers or catalysts are required for application. May be used in single ply and bituminous systems.
JM Two-Part Urethane Insulation Adhesive (UIA) Canister is a two-component polyurethane adhesive used for attaching fleece-backed membranes to insulation and insulation boards to the roof deck or to other insulation boards.
Features
Use: For bonding fleece-backed singly ply, insulation and cover boards.
Type: Self-contained two-part, low-rise foam adhesive.
Substrates: Compatible with the following: insulations, cover boards, and substrates: fleece-backed TPO, fleece-backed PVC, polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete; treated plywood; cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection).
Color: Pink
EPDM Roofing Systems
60 Mil Ethylene Propylene Diene Monomer Self-Adhered Membrane with Factory Inseam Tape. Nonreinforced, self-adhering, ethylene propylene diene monomer sheets with factory inseam tape for 60 mil.
Features
Meets or exceeds the requirements of ASTM D 4637, Type 1
Wide Temperature Application Range: Excellent adhesive performance and bond down to 20° F without the need for any additional prep or primer on all approved horizontal substrates. Substrate must be clean and dry.
Self-adhering capabilities: Membrane can be adhered without the use of additional VOC-containing adhesives or primers. Excellent for use where interior building activities may be sensitive to odors or VOC limitations exist. Self adhered applications also minimize jobsite waste and provide labor efficiencies for adhered applications with no adhesive flash off time.
Factory Inseam Tape: For superior quality assurance and labor savings compared to field fabricated seams.
Fully Extruded: Produces fewer air voids, more uniform thickness and smoother sheets.
Vulcanization Process: Combines two layers of membrane to produce a fully cross-linked monolithic membrane.
No VOC: No smell or odor. Ideal for hospitals, schools and places wanting to avoid disruption.
Membrane Formulation: Performs in extreme temperature climates and withstands differential movement (elongation).
JM EPDM membrane with factory inseam tape for NR 45 mil, 60 mil & NR 90 mil
Features
Meets the requirements of ASTM D 4637, Type I
Membrane: Nonreinforced, cured EPDM (ethylene propylene diene monomer).
Factory Inseam Tape: For superior quality assurance and labor savings compared to field fabricated seams.
Fully Extruded: Produces fewer air voids, more uniform thickness and smoother sheets.
Vulcanization Process: Combines two layers of membrane to produce a fully cross-linked monolithic membrane.
Membrane Formulation: Performs in extreme temperature climates and withstands differential movement (elongation).
UV-Stabilization Properties: Offers outstanding ozone and weather resistance delivering one of the longest service lives available.
Color: Black
45, 60 & 90 mil cured, nonreinforced ethylene propylene diene monomer sheets.
Features
Meets the requirements of ASTM D 4637, Type I
Membrane: Nonreinforced, cured EPDM (ethylene propylene diene monomer).
Fully Extruded: Produces fewer air voids, more uniform thickness and smoother sheets.
Vulcanization Process: Combines two layers of membrane to produce a fully cross-linked monolithic membrane.
Membrane Formulation: Performs in extreme temperature climates and withstands differential movement (elongation).
UV-Stabilization Properties: Offers outstanding ozone and weather resistance delivering one of the longest service lives available.
Technical Expertise: Backed by 30+ years of EPDM experience and installations.
Color: Black
JM EPDM membrane with factory inseam tape for R FIT 60 mil & R FIT 75 mil
Features
Meets the requirements of ASTM D 4637, Type II
Membrane: Cured EPDM (ethylene propylene diene monomer) reinforced with a tough 1,000+ denier polyester mat. Excellent puncture and hail resistance.
Factory Inseam Tape: For superior quality assurance and labor savings compared to field fabricated seams.
Fully Extruded: Produces fewer air voids, more uniform thickness and smoother sheets.
Vulcanization Process: Combines two layers of membrane to produce a fully cross-linked monolithic membrane.
Polymer Formulation: Performs in extreme temperature climates and withstands differential movement (elongation).
UV-Stabilization Properties: Offers outstanding ozone and weather resistance delivering one of the longest service lives available.
Color: Black
Cured ethylene propylene diene monomer reinforced with a tough 1,000+ denier polyester mat
Features
Meets the requirements of ASTM D 4637, Type II
Membrane: Cured EPDM (ethylene propylene diene monomer) reinforced with a tough 1,000+ denier polyester mat.
Fully Extruded: Produces fewer air voids, more uniform thickness and smoother sheets.
Vulcanization Process: Produces a redundant waterproofing monolithic membrane.
Polymer Formulation: Performs in extreme temperature climates and withstands differential movement.
UV-Stabilization Properties: Offers superior ozone and weather resistance delivering one of the longest service lives available.
Technical Expertise: Backed by 30+ years of EPDM experience and installations
Color: Black
EPDM Accessories
Needle-punched, non-UV resistant polyester separation layer used for TPO, PVC, and EPDM mechanically fastened systems and ballasted EPDM systems.
Features
Use: JM 3 oz Polyester Slipsheet is intended for use as a separation layer between an existing roof system and a new single ply recover system.
Material: 3.0 oz/yd2 (102 g/m2 ) needle-punched, non UV-resistant polyester fabric.
Color: White
Used to secure EPDM membrane from underneath in perimeters and corners.
Features
Use: To secure EPDM membrane from underneath in perimeters and corners and as additional securement as specified in Johns Manville specifications and details.
Materials: 10" (25.4 cm) wide, 45 mil (1.14 mm) thick, polyester scrim reinforced, cured EPDM strip with a factory-laminated, 3" (7.62 cm) self-adhering seam tape on each side.
Color: Black
Seals a JM EPDM roofing system joining a bituminous membrane.
Features
JM EPDM Metal/Membrane Flashing is a specially designed and manufactured flashing for sealing and waterproofing JM EPDM roofing systems where they join an adjacent bituminous roof membrane.
Materials: A nominal 6" (15.24 cm) strip of black JM EPDM membrane secured to flanges of nominal 4" (10.16 cm) wide galvanized steel.
6", 9" or 12" wide, uncured EPDM with clear release liner and factory applied pressure sensitive tape.
Features
Use: To easily form flashings around corners and penetrations. Specifically designed for use in areas that cannot be properly detailed with cured EPDM membrane.
Materials: 60 mil (1.52 mm) thick, uncured EPDM with a release liner and a factory laminated, self-adhering EPDM tape.
Color: Black
60 mil peel and stick uncured EPDM used to install inside or outside corners.
Features
Use: Use universally for either an inside or outside corner. Quick and easy to install
Materials: 60 mil (1.52 mm) thick, uncured EPDM (ethylene propylene diene monomer) and a factory laminated, self-adhering EPDM tape.
Color: Black
EPDM manufactured with conical steps and factory-applied pressure sensitive tape around the base.
Features
Use: Specifically designed for round, roof penetrations eliminating the need for field-fabrication. The large double-thick molded ribs, at the top of each step, offer superior tear resistance as well as a cutting guide.
Materials: Uncured EPDM (ethylene propylene diene monomer) with a pressure sensitive seam tape around the bottom.
Color: Black
One-piece, prefabricated units with a factory-applied pressure sensitive tape on the bottom of the base flange.
Features
Use: To seal uneven penetrations through the membrane that are difficult to flash.
Materials: Uncured EPDM (ethylene propylene diene monomer) with a pressure sensitive seam tape around the bottom.
Color: Black
Cured 6", 9" or 12" wide EPDM strip with a factory-applied pressure sensitive tape.
Features
Use: Provides additional reinforcing strength and moisture protection at the lap area of adjoining EPDM sheets, as well as sealing gravel stop flanges to EPDM membrane.
Materials: 45 mil (1.14 mm) thick, cured EPDM (ethylene propylene diene monomer) and factory-laminated, self-adhering seam tape.
Color: Black
6" round, uncured EPDM with a factory-applied pressure sensitive tape.
Features
Use: To seal seam laps where perimeter and/or header sheets intersect (T-Joints) in EPDM systems.
Materials: 45 mil (1.14 mm), uncured EPDM (ethylene propylene diene monomer) with a factory laminated, self-adhering seam tape.
Color: Black
3⁄8" x 30" x 30" heavy-duty, solid rubber pads with three rows of 3" factory-applied pressure sensitive tape.
Features
Use: Provide a safe, stable and maintenance-free walkway for quick and easy access to rooftop equipment in high traffic areas.
Materials: 375 mil (9.53 mm) thick, textured, solid rubber pad with three rows of 3" (762 mm) wide factory-applied tape.
Color: Black
60 mil thick, EPDM with a release liner and a 3" or 6" factory laminated, self-adhering EPDM tape.
Features
Use: To efficiently flash curbs with a consistent, clean appearance
Materials: 60 mil (1.52 mm) thick, EPDM with a release liner and a 3" or 6" factory laminated, self-adhering EPDM tape.
Color: Black
UV-resistant, polypropylene, needle-punched fabric for use as a slipsheet between the membrane and ballast/pavers.
Features
Use: Designed for use as a protective layer between pavers or ballast and EPDM membrane, as well as a separating sheet in some recover systems.
Material: Nominal 7.0 oz/yd2 (237.34 g/m2 ) needle-punched UV-resistant polypropylene fabric.
Color: Black
6" wide, 45 mil strip with factory-applied pressure sensitive tape.
Features
Use: To secure field membrane at any angle change greater than 2 in/ft.
Materials: 6" (15.24 cm) wide, 45 mil (1.14 mm) thick, polyester scrim reinforced, cured EPDM strip with a factory-laminated, 3" (7.62 cm) self-adhering seam tape.
Color: Black
3" or 6" wide, self-adhering, extruded EPDM pressure sensitive tape.
Features
Use: For field seaming JM EPDM membranes. Utilizes a clear polyethylene release liner for ease of installation.
Materials: 3" or 6" (7.62 cm or 15.24 cm) wide, self-adhering, extruded EPDM (ethylene propylene diene monomer) with a clear polyethylene release liner
Color: Black
Polyester 9.0oz needle-punched UV-resistant fabric utilized as cushioning, separation or a protective layer for single ply systems.
Features
Use: JM Polyester Mat Protection Slipsheet is intended for use as a separation layer between extruded polystyrene insulation and roofing membrane in protected membrane (inverted) roof assemblies, as well as a separating sheet in some recover systems. It is also used as a protective layer between pavers and JM single ply membrane.
Material: 9.0 oz/yd2 (305.15 g/m2 ) needle-punched, UV-resistant polyester fabric.
Color: White
Provides a visual and physical safety warning on roof top areas of caution and potential hazards.
Features
Use: Provides a visual and physical safety warning on roof top areas of caution and potential hazards including designation of the roof perimeter.
Material: 55 mil (1.40 mm) total thickness, comprised of 30 mil (0.76 mm) yellow non-reinforced TPO membrane laminated to 25 mil (0.64 mm) white cured seaming tape.
Colors: Yellow
EPDM Adhesives, Cements, Sealants
JM All Season Sprayable Bonding Adhesive is an aerosol bonding adhesive that can be used for TPO and EPDM adhered roofing systems and wall flashings. The JM All Season adhesive complies to Low VOC requirements and is a contact adhesive requiring two-sided application. JM All Season Sprayable Bonding Adhesive can also be used as a primer for JM Self Adhered Vapor Barriers.
Features
Use: JM All Season Sprayable Bonding Adhesive is an aerosol bonding adhesive that can be used for TPO and EPDM adhered roofing systems and wall flashings. The JM All Season adhesive complies to Low VOC requirements and is a contact adhesive requiring twosided application. JM All Season Sprayable Bonding Adhesive can also be used as a Primer for JM Self Adhered Vapor Barriers.
Type: Two-sided sprayable aerosol adhesive for both warm and cold weather applications with fast drying properties in a pressurized canister.
Substrates: Compatible with the following field and wall applications/ boards/substrates: Polyisocyanurate; Invinsa Roof Board; ProtectoR HD board; gypsum; concrete; treated
JM EPDM Tape Primer Plus is used to prime JM EPDM membrane surfaces for adhering JM EPDM Tape and Peel and Stick products.
Features
Use: For adhering SBS membranes to approved substrates.
Type: One-part, solvent free, moisture curing, elastomeric adhesive
Color: Translucent Electric Blue
Features: Tack-Back functionality for detail work in vertical applications and seam work in horizontal applications.
JM EPDM Tape Primer Plus (Low VOC) is used to prime JM EPDM membrane surfaces for adhering JM EPDM Tape and Peel and Stick products.
Features
Use: To prime JM EPDM membrane surfaces for adhering JM EPDM Tape and Peel and Stick products.
Type: One-part, solvent-based membrane primer
Color: Grey
Features: Tack-Back functionality for detail work in vertical applications and seam work in horizontal applications.
JM EPDM Water Based Membrane Adhesive is used for adhering JM EPDM membrane to approved roofing substrates.
Features
Use: For adhering JM EPDM membrane to approved roofing substrates. Limited availability from October 1st to April 15th.
See Bulletin for additional information
Type: One-part, water-based membrane adhesive, one or two-sided application.
Substrates: Compatible with approved insulations and cover boards; wood or concrete substrates.
Color: Light purple when wet and adhering one-sided horizontal application, and dark purple when ready to adhere for twosided vertical application.
JM EPDM/PVC Pourable Sealer is a sealant for EPDM Peel & Stick Pourable Sealer Pockets or PVC systems to seal irregular penetrations.
Features
Use: JM EPDM/PVC Pourable Sealer is used as a penetration pocket filler.
Type: Two-part polyurethane sealant.
Colors:
Part A: Black
Part B: Amber
JM LVOC Membrane Adhesive is a one-part, low VOC synthetic polymer-based membrane adhesive.
Features
Use: For adhering JM TPO and JM EPDM membranes to approved substrates. Do not use on fleece-backed membranes at any time.
Type: One-part, low VOC synthetic polymer-based membrane adhesive.
Substrates: Compatible with approved insulations and cover boards, wood substrates, concrete, and light-weight concrete decks.
Color: Yellow
JM Membrane Bonding Adhesive is used for adhering JM TPO and EPDM membranes to approved substrates.
Features
Use: For adhering JM TPO and EPDM membranes to approved substrates. Do not use on fleece-backed membranes.
Type: One-part, synthetic polymer-based membrane adhesive, two-sided application.
Substrates: Compatible with insulation boards; metal, wood and other decking materials.
Color: Yellow
JM One-Part Pourable Sealer is used as a penetration pocket filler.
Features
Use: JM One-Part Pourable Sealer is used as a penetration pocket filler (Pour Application). One-Part Pourable Sealer can also be used as a liquid flashing for Single Ply membranes only (Brushed Application).
Type: One-part polyether sealant.
Color: White
JM One-Step Foamable Adhesive is a polyurethane adhesive for attaching insulation/cover boards to the roof deck or other insulation boards.
Features
Use: JM One-Step Foamable Adhesive is a two-component polyurethane adhesive used for attaching insulation or cover boards to the roof deck or to other insulation boards.
Type: Two-part, cold application insulation adhesive.
Substrates: Compatible with the following insulations (1), cover boards, and substrates: polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; structural concrete; lightweight insulating concrete; treated plywood (5/8" (1.58cm) min. thickness); cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection).
Ensure that all insulation boards are 4' x 4' or smaller.
Color: Part 1 - Tan, Part 2 - Colorless
Features:
Solvent free. Set boards immediately into adhesive; reduces installation time and maximizes adhesive footprint.
No hoses or pumps required.
Always on ratio, eliminates guesswork.
JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive.
RSUA Mini Cansiters available early May 2024.
Features
Use: JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive used for attaching fleece-backed single ply membranes to insulation boards or various deck types as well as insulation boards to the roof deck or to other insulation boards.
Type: Two-part, cold application insulation adhesive.
Substrates: Compatible with the following insulations, cover boards, and substrates1 : polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete2 (Lightweight structural, poured-in-place structural, precast, and insulating); treated plywood (5/8" (1.58 cm) min. thickness); cementitious wood fiber; gypsum; smooth or granulated BUR, APP or SBS.
Ensure that all insulation boards are 4' x 4' or smaller.
Ensure that the concrete is adequately dry for adhesion.
Color: Part 1 - Brown, Part 2 - Colorless, Combined/foamed adhesive - Light Amber
Features:
Solvent free, and HCFC or CFC free.
Universal adhesive for adhering fleece-backed membranes and insulation boards.
Sets in minutes.
Single Ply LVOC Caulk is used to seal flashing terminations, peel and stick products, and exposed edges of JM membrane cement splices.
Features
Type: One-part, elastomeric sealant
Colors: Black, White or Grey
JM Single Ply Membrane Primer (LVOC) is a synthetic polymer-based Primer for JM TPO and EPDM Membrane surfaces.
Features
Use: To prime JM EPDM and TPO membrane surfaces for adhering EPDM or TPO peel and stick products. Additionally, it can be used with single ply liquid flashing products in EPDM applications.
Type: One-part, low VOC synthetic polymer-based membrane primer.
Color: Clear to Light Yellow
Single Ply Sealing Mastic is used to seal JM Single Ply membranes to terminations and other penetrations.
Features
Type: One-part, butyl polymer-based water cutoff mastic.
Substrates: Compatible with wood, concrete, metal, plastic, and other substrates for water penetration prevention.
Color: Grey
JM Two-Part Pourable Sealer is a two-part sealant used as a penetration pocket filler.
Features
Use: JM Two-Part Pourable Sealer is used as a penetration pocket filler.
Type: Two-part polyether sealant.
Colors:
Part A: Tan
Part B: Black
JM Two-Part UIA is a Two-part cold-application adhesive used to adhere insulation board products to approved roofing substrates, and insulation to insulation.
Features
Type: Two-part, cold application insulation adhesive
Substrates: Compatible with the following insulations, cover boards, and substrates: polyisocyanurate; HD wood fiber; perlite; HD Polyiso; gypsum; concrete; treated plywood; cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection)
Color: Pink
Features: No primers or catalysts are required for application. May be used in single ply and bituminous systems.
JM Two-Part Urethane Insulation Adhesive (UIA) Canister is a two-component polyurethane adhesive used for attaching fleece-backed membranes to insulation and insulation boards to the roof deck or to other insulation boards.
Features
Use: For bonding fleece-backed singly ply, insulation and cover boards.
Type: Self-contained two-part, low-rise foam adhesive.
Substrates: Compatible with the following: insulations, cover boards, and substrates: fleece-backed TPO, fleece-backed PVC, polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete; treated plywood; cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection).
Color: Pink
JM Weathered Membrane Cleaner cleans the release agent and dirt from JM TPO and JM EPDM membranes.
Features
Use: To thoroughly clean the release agent and dirt from JM TPO and JM EPDM membranes prior to applying primers or splice adhesives.
Type: One-part, organic solvent cleaning agent.
Color: Clear
EPDM Insulation and Cover Boards
DEXcell Cement Roof Board is a cover board that is able to withstand prolonged exposure to moisture and meets FM Class 1 fire barrier requirements.
Features
Meets the requirements of ASTM C 1325
Durability: Composed of a lightweight cementicious core to provide exceptional impact resistance.
Strength: Exceptionally high compressive strength improves overall roof system performance. Cement board is able to withstand prolonged exposure to moisture and is ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics.
Moisture and Mold Resistance: Cement based core provides superior moisture, mold, and mildew resistance. Scores a maximum "10" for mold resistance when tested per ASTM D 3273.
DEXcell FA Glass Mat Roof Board is a cover board with a heavy duty coated fiber glass facer. It is moister and mold resistant and meets FM Class 1 fire barrier requirements.
Features
Meets the requirements of ASTM C 1177
Handleability: Heavy duty coated fiber glass facer ideal for fully adhered systems improves handling and strength. Scores and snaps easily.
Strength: High compressive strength improves overall roof system performance. Ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Enhanced mold resistant core and coated fiberglass facers provide mold and mildew resistance per ASTM-D 3273.
DEXcell Glass-Mat Roof Board is a gypsum cover board that can be used in mechanically fastened single ply systems.
Features
Meets the requirements of ASTM C 1177
Handleability: Coated fiberglass facer ideal for mechanically fastened systems improves handling and strength. Scores and snaps easily.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Enhanced mold resistant core and coated fiberglass facers provide mold and mildew resistance per ASTM-D 3273.
DEXcell® FA VSH Glass Mat Roof Board is competitively priced, easier to install and very severe hail strong to withstand the harshest conditions over the long haul.
Features
Meets the requirements of ASTM C 1177
Handleability: Heavy duty coated fiberglass facer ideal for fully adhered systems improves handling and strength. Scores and snaps easily.
Strength: High compressive strength improves overall roof system performance. Ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Enhanced mold resistant core and coated fiberglass facers provide mold and mildew resistance per ASTM-D 3273.
DensDeck Prime Roof Board is a gypsum cover board with an enhanced coated glass mat facer
Features
Meets the requirements of ASTM C 1177
Enhanced Face Mat: Coated fiberglass facer ideal for fully adhered systems provides a broader compatibility and higher performance with roofing adhesives.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
DensDeck Roof Board is a gypsum cover board with a glass mat facer.
Features
Meets the requirements of ASTM C 1177
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Scores a 10, the highest performance level for mold resistance, when tested in accordance with ASTM D 3273.
DensDeck StormX Prime Roof Board contains an enhanced coated glass mat facer and achieves FM's VSH approval in select JM TPO systems.
Features
Meets the requirements of ASTM C 1177
Very Severe Hail: Achieves FM 'VSH' approval with adhered 60 or 80 mil (smooth back) JM TPO membrane and standard JM TPO membrane adhesives when 4x4' panels are adhered in low rise foam adhesive ribbons, 12" OC min.
Enhanced Face Mat: Coated fiberglass facer ideal for fully adhered systems provides a broader compatibility and higher performance with roofing adhesives.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
ENRGY 3 is a closed-cell polyisocyanurate foam core insulation board offering a high R-value to keep your building well insulated from the elements.
Features
Meets the following requirements: ENRGY 3 / Tapered ENRGY 3 • CAN/ULC S704, Type 2, Class 3 (140 kPa) • ASTM C 1289, Type II, Class 1, Grade 2 ENRGY 3 25 PSI / Tapered ENRGY 3 25 PSI • CAN/ULC S704, Type 3, Class 3 (170 kPa) • ASTM C 1289, Type II, Class 1, Grade 3
Glass-Reinforced Facers: Provides rigidity and resistance to indentation and crushing, and are compatible with BUR, modified bitumen and single ply membrane systems.
Closed Cell Polyisocyanurate Foam Core: Provides high R-value per inch in built-up, modified bitumen, metal roof and single ply roof systems, and approved for direct application to steel decks.
ENRGY 3 CGF is a closed-cell polyisocyanurate foam core with an inorganic-coated glass facer on each side. It offers high R-value per inch and achieves a UL Class A approval in select systems.
Features
Meets the following requirements: ENRGY 3 CGF / Tapered ENRGY 3 CGF • CAN/ULC S704, Type 2, Class 3 (140 kPa) • ASTM C 1289, Type II, Class 2, Grade 2 ENRGY 3 25 PSI CGF / Tapered ENRGY 3 25 PSI CGF • CAN/ULC S704, Type 3, Class 3 (170 kPa) • ASTM C 1289, Type II, Class 2, Grade 3
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in fully adhered single ply systems.
Closed Cell Polyisocyanurate Foam Core: Provides high R-value per inch in built-up, modified bitumen, metal roof and single ply roof systems, and utilizes an environmentally compliant blowing agent that provides high thermal insulation performance.
Fire Resistance: Achieves UL Class A approval directly over a combustible wood deck up to 1/2:12" slope.
1/2" High-Density Polyiso Cover Board
ENRGY 3® HD is a closed cell polyisocyanurate foam technology provides additional insulation value (R-value of 2.5), with lightweight and high density characteristics.
Features
Glass-Reinforced Facers: Provides rigidity and resistance to indentation and crushing, and are compatible with modified bitumen and single ply membrane systems.
Lightweight: Offers labor and installation efficiencies and allows more options for situations where the overall weight is a concern. This also means easy hoisting, staging and maneuvering around the roof.
High R-Value (2.5 R): Provides significantly more thermal insulation (R-value) than wood fiber or gypsum boards.
User Friendly: ENRGY 3 HD allows easy & efficient scoring, cutting and snapping which permits fast, tight fabrication and all in a low dust environment.
Resistance To Damage: High impact, and compressive strength provides a protective layer for insulation while working with the membrane above to ensure maximum performance and longevity.
ProtectoR HD is a high-density polyiso cover board that provides excellent resistance against harsh rooftop conditions including hail, wind uplift, puncture and moisture.
Features
Meets the requirements of ASTM C 1289, Type II, Class 4, Grade 1
High-Density Polyisocyanurate Foam Core: Closed cell polyisocyanurate foam technology provides additional insulation value (R-value of 2.5), with lightweight and low water absorption characteristics.
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in adhered single ply systems.
Lightweight: Offers labor and installation efficiencies and allows more options for situations where the overall weight is a concern. This also means easy hoisting, staging and maneuvering around the roof.
User Friendly: ProtectoR HD allows easy & efficient scoring, cutting and snapping which permits fast, tight fabrication and all in a low dust environment.
High R-Value (2.5 R): Provides significantly more thermal insulation (R-value) than wood fiber or gypsum boards.
Resistance To Damage: High impact, flexural and compressive strength provides a protective layer for insulation while working with the membrane above to ensure maximum performance and longevity.
Up to 50% Fewer Fasteners: Achieves FM 1-90 utilizing 8 fasteners per 4'x 8' board with an adhered reinforced membrane and 11 fasteners per 4'x 8' board with an adhered non-reinforced membrane over a min. 22 ga steel deck or structural concrete deck. Refer to fastening patterns on page 2.
Fire Resistance: Achieves UL Class A approval directly over a combustible wood deck up to 1/2:12" slope.
RetroPlus Roof Board is a high-density, expanded, perlite-based cover board engineered to optimize system performance across all applications.
Features
Meets the requirements of ASTM C 728, Type 3
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive adhesive absorption in hot-asphalt and cold applied roofing systems, and to provide a strong surface for bonding bituminous membranes.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and superior fire resistance.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
High Density: Provides additional strength and durability over 1/2" Retro-Fit Board with low moisture content and water resistance compared to wood fiber board.
SECUROCK Cement Roof Board is ideal for liquid applied membrane roof systems. It has superior wind-uplift performance for a wide variety of roof assemblies and excellent fire performance.
Features
Meets the requirements of ASTM C 1325
Strength: Engineered to provide superior wind-uplift performance for a wide variety of roof assemblies. The board is formed using an aggregated portland cement slurry with a polymer-coated, glass-fiber mesh completely encompassing edges and both surfaces, to enhance bond strength of membrane systems and gives excellent resistance to delamination.
Fire Performance: Provides excellent fire performance with unlimited slope classifications and is non-combustable per UL 790.
Moisture and Mold Resistance: Cement based, highly water durable board, scored a maximum "10" for mold resistance when tested per ASTM D 3273.
SECUROCK Gypsum-Fiber Roof Board contains a integral water-resistant core and has excellent fire performance.
Features
Meets the requirements of ASTM C 1278
Strength: Engineered to provide high wind-uplift performance. Uniform composition providing enhanced bond strength of membrane systems with no risk of facer delamination.
Fire Performance: Provides excellent fire performance, and demonstrates exceptional surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Integral water-resistant core scored a maximum "10" for mold resistance when tested per ASTM D 3273.
SECUROCK Ultralight Glass-Mat Roof Board is a gypsum cover board with fiber glass facer and back.
Features
Meets the requirements of ASTM C 1177
Handleability: Unmatched mat-to-core tensile bond strength, easy to cut and has reduced facer delamination.
Fire Performance: Provides excellent fire performance, and demonstrates exceptional surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Fiber glass facer and back with treated core delivers moisture and mildew resistance.
SeparatoR provides an economical solution for mechanically fastened single ply membrane recover applications while adding thermal insulation value to your building.
Features
Meets the requirements of ASTM C 1289, Type II, Class 1, Grade 2
Closed Cell Polyisocyanurate Foam Core: Provides high R-value per inch, light weight, and flexibility in recover and metal retrofit applications
Glass-Reinforced Facers: Provides rigidity and resistance to indentation and crushing for mechanically fastened single ply membrane systems.
High R-Value (2.8 R): ½" SeparatoR Board has more than two times the R-value of wood fiber or gypsum boards.
SeparatoR CGF is a versatile, ½"-thick cover board solution that is designed for re-cover applications and offers performance and value.
Features
Meets the requirements of ASTM C 1289, Type II, Class 2, Grade 3
Closed Cell Polyisocyanurate Foam Core: Closed cell polyisocyanurate foam technology provides additional insulation value with lightweight and low water absorption characteristics.
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in adhered single ply systems.
High R-Value (2.9 R): Has more than two times the R-value of wood fiber and more than four times the R-value of gypsum boards.
User Friendly: Allows easy and efficient scoring, cutting and snapping which permits fast, tight fabrication and all in a low dust environment.
Lightweight: Offers labor and installation efficiencies and allows more options for situations where the overall weight is a concern. This also means easy hoisting, staging and maneuvering around the roof.
Up to 50% Fewer Fasteners: Achieves FM 1-90 utilizing 8 fasteners per 4'x 8' board with an adhered reinforced membrane and 11 fastners per 4'x 8' board with an adhered non-reinforced membrane over a min. 22 ga steel deck or structural concrete deck.
Fire Resistance: Achieves UL Class A approval directly over a combustible wood deck up to 1/2:12" slope.
SBS Roofing Systems
Meets the requirements of ASTM D 6163, Type 1, Grade S
DynaBase HW is used as a fiber glass-reinforced base or ply sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Surfacing: Fine mineral parting agent on the top side of the sheet. A polyolefin burn-off film on the bottom side enables the product to be applied using heat welding techniques.
Meets the requirements of ASTM D 6164, Type 1, Grade S
DynaBase PR is used as a polyester-reinforced base or ply sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester-Reinforcement Mat: Polyester mat with bi-directional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Surfacing: Fine mineral parting agent on both sides.
Meets or exceeds the criteria for ASTM D 6298
DynaClad is used as a fiber glass-reinforced cap or flashing sheet in a variety of multi-ply roofing systems.
Aluminum Foil Surface: Provides high reflectivity, reducing heat load on the roof membrane and potentially lowering air conditioning energy costs.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Meets or exceeds the criteria for ASTM D 6298
DynaClad Copper is used as a fiber glass-reinforced cap or flashing sheet in a variety of multi-ply roofing systems.
Copper Foil Surface: Provides high reflectivity, reducing heat load on the roof membrane and potentially lowering air conditioning energy costs.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Meets the requirements of ASTM D 6164, Type I, Grade S
DynaFast 180 HW is a heat weldable base or ply sheet for use in mechanically fastened systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester-Reinforced Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets the requirements of ASTM D 6164, Type I, Grade S
DynaFast 180 S is a base or ply sheet for use in mechanically fastened systems.
Fine Mineral Parting Agent: A fine material parting agent is applied to both sides of the product. This product does not have a surface finish and must be used in constructions that will provide protection from UV (ultraviolet light) and the elements.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester-Reinforced Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Meets the requirements of ASTM D 6164, Type II, Grade S
DynaFast 250 HW is a heat-weldable base or ply sheet for use in mechanically fastened systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness, and puncture resistance and can accommodate stresses created by typical roof top expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets or exceeds the criteria for ASTM D 6221, Type I
DynaFlex is used as a composite-reinforced cap sheet membrane in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Meets the requirements of ASTM D 6221, Type I, Grade G
DynaFlex CR G is used as a composite-reinforced cool roof cap sheet membrane in a variety of multi-ply roofing systems.
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The thicker JM SBS coating provides more waterproofing value.
Fiber Glass/Polyester Reinforcement Mat: The inorganic fiber glass reinforcement, in conjunction with the polyester, provides stability, toughness and puncture resistance to the product, and resists moisture absorption.
Meets the requirements of ASTM D 6163, Type I, Grade G
DynaGlas is used as a fiber glass-reinforced mineral-surfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Meets the requirements of ASTM D 6163, Type 1, Grade G
DynaGlas 30 FR is used as a fiber glass-reinforced mineral-surfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Meets the requirements of ASTM D 6163, Type 1, Grade G
DynaGlas FR is used as a fiber glass-reinforced mineral-surfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Meets the requirements of ASTM D 6163, Type I, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics, contributing to better aesthetics.
Meets the requirements of ASTM D 4601
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement.
Polyolefin Burn-Off Film with a Self-Adhering Modified Bitumen: The top side polyolefin burn-off film promotes ease of heat welding for installation of a heat-welded cap sheet such as DynaWeld Cap 250. The bottom side has a self-adhering surface with an easy-to-peel plastic film sheet that allows for installation without the need of hot asphalt or heat welding.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Polyester-Reinforcement Mat: Polyester mat with bi-directional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film with a Self-Adhering Modified Bitumen: The top side polyolefin burn-off film promotes ease of heat welding for installation of a heat-welded cap sheet such as DynaWeld Cap 250. The bottom side has a self-adhering surface with an easy-to-peel plastic film sheet that allows for installation without the need of hot asphalt or heat welding.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Polyester-Reinforcement Mat: Polyester mat with bi-directional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Two-Sided Self-Adhering Modified Bitumen: The product's self-adhering feature with an easy-to-peel plastic film on both sides of the sheet allows for installation without the need of hot asphalt or heat welding.
Sand Top Surface: Allows for installation of a cap sheet with hot asphalt, an approved cold adhesive, or by using heat welding techniques.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Polyester-Reinforcement Mat: Polyester mat with bi-directional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Self Adhering Modified Bitumen: The product's self-adhering feature with an easy-to-peel plastic film on the bottom of the sheet allows for installation without the need of hot asphalt or heat-welding.
Meets the requirements of ASTM D 4601
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement.
Two-Sided Self-Adhering Modified Bitumen: The product's self-adhering feature with an easy-to-peel plastic film on both sides of the sheet allows for installation without the need of hot asphalt or heat welding.
Meets the requirements of ASTM D 4601
Sand Top Surface: Allows for installation of a cap sheet with hot asphalt, an approved cold adhesive, or by using heat welding techniques.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement.
Self Adhering Modified Bitumen: The product's self-adhering feature with an easy-to-peel plastic film on the bottom of the sheet allows for installation without the need of hot asphalt or heat-welding.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement.
Self Adhering Modified Bitumen: The product's self-adhering feature with an easy-to-peel plastic film on the bottom of the sheet allows for installation without the need of hot asphalt or heat-welding.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet.
Polyester-Reinforcement Mat: Polyester mat with bi-directional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Self Adhering Modified Bitumen: The product's self-adhering feature with an easy-to-peel plastic film on the bottom of the sheet allows for installation without the need of hot asphalt or heat-welding.
Meets the requirements of ASTM D 6162, Type 1, Grade G
DynaKap FR T1 is used as a premium fiber glass/polyesterreinforced mineral-surfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion. Granules are available in White or Black.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Meets the requirements of ASTM D 6162, Type I, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Fiber Glass/Polyester Reinforcement Mat: Provides stability, toughness and puncture resistance to the product and resists moisture absorption. The reinforcement also provides high tensile strength and affords better natural resistance to the other factors which affect roof performance.
Color: Bright White only
Meets the requirements of ASTM D 6162, Type I, Grade G
DynaKap FR T1 HW is used as a premium fiber glass/polyester-reinforced mineral-surfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass. Polyolefin
Burn-Off Film: Promotes ease of heat welding.
Colors: White or Black.
Meets the requirements of ASTM D 6162, Type I, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Fiber Glass / Polyester Reinforcement Mat: Provides stability, toughness and puncture resistance to the product and resists moisture absorption. The reinforcement also provides high tensile strength and affords better natural resistance to the other factors which affect roof performance.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Color: Bright White only
Meets the requirements of ASTM D 6162, Type I, Grade G
DynaKap T1 is used as a fiber glass/polyester-reinforced mineralsurfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion. Granules are available in White or Black.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Colors: White or Black.
Meets the requirements of ASTM D 6164, Type I, Grade G
DynaLastic 180 is used as a polyester-reinforced mineral-surfaced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Meets the requirements of ASTM D 6164, Type I, Grade G
DynaLastic 180 FR is used as a polyester-reinforced mineral-surfaced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Polyester-Reinforced Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Colors: White or Black.
Meets the requirements of ASTM D 6164, Type I, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Polyester Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Color: Bright White only
Meets the requirements of ASTM D 6164, Type I, Grade S
DynaLastic 180 S is used as a polyester-reinforced base or ply sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Surfacing: A fine material parting agent is applied to both sides of the product.
Meets the requirements of ASTM D 6164, Type II, Grade G
DynaLastic 250 is used as a premium polyester-reinforced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness, and puncture resistance and can accommodate stresses created by typical roof top expansion and contraction forces.
Meets the requirements of ASTM D 6164, Type II, Grade G
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness, and puncture resistance and can accommodate stresses created by typical roof top expansion and contraction forces.
Meets the requirements of ASTM D 6164, Type II, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
Elastomeric SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation, and lends elasticity and flexibility to the sheet.
Heavy Duty Polyester Mat Reinforcement: A tough, nonwoven polyester mat provides excellent tensile strength, toughness and puncture resistance, and can accommodate stresses created by typical rooftop expansion and contraction forces.
Meets the requirements of ASTM D 6164, Type II, Grade G
DynaLastic 250 FR is used as a premium polyester-reinforced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness, and puncture resistance and can accommodate stresses created by typical roof top expansion and contraction forces.
Meets the requirements of ASTM D 6164, Type II, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
Elastomeric SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation, and lends elasticity and flexibility to the sheet and contains fire-retardant additives.
Heavy Duty Polyester Mat Reinforcement: A tough, nonwoven polyester mat provides excellent tensile strength, toughness and puncture resistance, and can accommodate stresses created by typical rooftop expansion and contraction forces.
Color: Bright White only
Meets the requirements of ASTM D 6164, Type II, Grade S
DynaLastic 250 S is used as a polyester-reinforced base or ply sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Heavy Duty Polyester-Reinforcement Mat: Provides bidirectional glass-scrim reinforcement and offers robust tear strength and puncture resistance, allowing for high wind performance and excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Surfacing: A fine material parting agent is applied to both sides of the product.
Meets the requirements of ASTM D 6162, Type III, Grade G
DynaMax FR is used as a premium fiber glass/ polyester-reinforced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Meets the requirements of ASTM D 6162, Type III, Grade G
DynaMax FR CR G is used as a fiber glass/polyester-reinforced cool roof cap sheet in a variety of multi-ply roofing systems.
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Meets the requirements of ASTM D 6162, Type III, Grade G
DynaMax FR HW is used as a premium fiber glass/ polyester-reinforced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets the requirements of ASTM D 6162, Type III, Grade G
DynaMax FR HW CR G is used as a premium fiber glass/ polyester-reinforced cool roof cap sheet in a variety of multi-ply roofing systems.
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets the requirements of ASTM D 6162, Type III, Grade G
DynaMax FR Plus is used as a premium fiber glass/ polyester-reinforced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Meets the requirements of ASTM D 6162, Type III, Grade S
DynaMax FR Plus Smooth is used as a premium fiber glass/ polyester-reinforced base sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: Fine mineral parting agent on both sides of the sheet.
Meets the requirements of ASTM D 6162, Type III, Grade S
DynaMax FR S HW is used as a premium fiber glass/ polyester-reinforced base sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: Fine mineral parting agent on the top side of the sheet. A polyolefin burn-off film on the bottom side enables the product to be applied using heat welding techniques.
Meets the requirements of ASTM D 6162, Type III, Grade S
DynaMax FR Smooth is used as a premium fiber glass/ polyester-reinforced modified bitumen base sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: A fine material parting agent is applied to both sides of the product.
Meets the requirements of ASTM D 6162, Type III, Grade S
DynaMax Smooth is used as a premium fiber glass/ polyester-reinforced modified bitumen base, ply, or cap sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: A fine material parting agent is applied to both sides of the product.
Material meets the requirements of ASTM D 6162, Type I, Grade S
DynaPly T1 is used as a premium fiber glass/polyester-reinforced base or ply sheet in a variety of multi-ply roofing systems.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Non-Blocking Surface: Nonblocking surface does not have a surface finish and must be used in constructions that will provide protection from UV (ultraviolet light) and the elements.
Preformed, skid-resistant roof protection pads consisting of modified asphalt, reinforcements and fillers with a ceramic granule surface on both sides. They are durable, resilient and maintenance free.
DynaTred and DynaTred Plus can be installed over built-up and modified bitumen roofing systems to provide an integral, skidresistant walkway for demanding service access needs.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the modified asphalt sheet. The ceramic coating promotes excellent long-term adhesion.
Easy Installation: Can be easily cut with a heavy-duty utility knife or circular saw with a carbide-tipped blade.
Colors: Available in either Black/White or White/White.
Meets the requirements of ASTM D 6164, Type I, Grade S
DynaWeld 180 S is used as a polyester-reinforced base or ply sheet in a variety of multi-ply roofing systems.
Fine Mineral Parting Agent: Nonblocking surface for use as a base sheet or ply sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Surfacing: Fine mineral parting agent on the top side of the sheet. A polyolefin burn-off film on the bottom side enables the product to be applied using heat welding techniques.
Meets the requirements of ASTM D 6163, Type I, Grade S
DynaWeld Base is used as a fiber glass-reinforced base or ply sheet in a variety of multi-ply roofing systems.
Fine Mineral Parting Agent: Nonblocking surface for use as a base sheet or ply sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets the requirements of ASTM D 6163, Type I, Grade G
DynaWeld Cap is used as a fiber glass-reinforced mineralsurfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets the requirements of ASTM D 6164, Type I, Grade G
DynaWeld Cap 180 is used as a polyester-reinforced mineralsurfaced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Polyester-Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Colors: White, Black, Tan (Black and Tan may require extended lead times).
Meets the requirements of ASTM D 6164, Type I, Grade G
DynaWeld Cap 180 FR is used as a polyester-reinforced mineralsurfaced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Polyester Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Colors: White, Black and Tan (Black and Tan may require extended lead times.)
Meets the requirements of ASTM D 6164, Type I, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Polyester Reinforcement Mat: Polyester mat with bidirectional glass-scrim reinforcement offers robust tear strength and puncture resistance, allowing for high wind performance and an excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Color: Bright White only
Meets the requirements of ASTM D 6164, Type II, Grade G
DynaWeld Cap 250 is used as a premium polyester-reinforced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
Fiber Glass/Polyester Reinforcement Mat: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness, and puncture resistance and can accommodate stresses created by typical roof top expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Colors: White, Black and Tan (Black and Tan may require extended lead times).
Meets the requirements of ASTM D 6164, Type II, Grade G
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion. Granules are available in White, Black and Tan (Black and Tan may require extended lead times).
Fiber Glass/Polyester Reinforcement Mat: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness, and puncture resistance and can accommodate stresses created by typical roof top expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets the requirements of ASTM D 6164, Type II, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The thicker JM SBS coating provides more waterproofing value.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness and puncture resistance, and it can accommodate stresses created by typical rooftop expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets the requirements of ASTM D 6164, Type II, Grade G
DynaWeld Cap 250 FR is used as a premium polyester-reinforced cap or flashing sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness and puncture resistance, and it can accommodate stresses created by typical rooftop expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Colors: White, Black and Tan (Black and Tan may require extended lead times).
Meets the requirements of ASTM D 6164, Type II, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Heavy Duty Polyester-Reinforcement Mat: Provides excellent tensile strength, toughness and puncture resistance, and it can accommodate stresses created by typical rooftop expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Color: Bright White only
Meets the requirements of ASTM D 6163, Type I, Grade G
DynaWeld Cap FR is used as a fiber glass-reinforced mineralsurfaced cap sheet in a variety of multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction experienced on all roofs. The FR blend contains additional fire-retardant additives.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Colors: White, Black and Tan (Black and Tan may require extended lead times.)
Meets the requirements of ASTM D 6163, Type I, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics, contributing to better aesthetics.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Color: Bright White only
SPECIAL ORDER SHEET
Meets the requirements of ASTM D 6163, Type II, Grade G
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the SBS modified bitumen sheet.
High-Quality SBS Rubber and Asphalt Blend: Lends elasticity and flexibility to the sheet and contains fire-retardant additives. The thicker JM SBS coating provides more waterproofing value.
Heavy Weight Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory, less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
JM SBS High Performance (HP) base membranes use a composite reinforcement, a simplified product offering with glass and polyester reinforced mats offer higher strength and improved stability for ultimate performance. These products meet CSA 123.23, Type C, Grade 3 for Canada.
JM SBS High Performance (HP) cap membranes use a composite reinforcement, a simplified product offering with glass and polyester reinforced mats offer higher strength and improved stability for ultimate performance. These products meet CSA 123.23, Type C, Grade 1 for Canada.
Meets the requirements of ASTM D 4601, Type II, and D 1970
JM BaseGrip™ SD/SA is designed for use in roofing systems where two or more plies of modified bitumen are desired. It may be used as the base ply when installed over an approved substrate.
Sand Top Surface: With a self adhering side lap that aids with faster installation and ease of use. Also allows for installation of a torchable cap sheet, hot asphalt, or an approved cold adhesive. Is ideal with heat welding.
SBS (Styrene-Butadiene-Styrene) Synthetic Rubber and High Quality Asphalt Blend: Brings elasticity and flexibility to the sheet; lays flat virtually eliminating wrinkles resulting in fast, efficient applications. The elongation and recovery properties allow the product to easily accommodate the continual expansion and contraction strains experienced on all roofs.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability, tensile strength, puncture resistance, and withstands differential movement.
Self Adhering Modified Bitumen: The product's self-adhering feature with an easy-to-peel plastic film on the bottom of the sheet and top side lap aids with faster installation without the need of hot asphalt or heat welding.
Meets the requirements of ASTM D 4601
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet, and includes fire-retardant additives.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement.
Two-Sided Self-Adhering Modified Bitumen: The product's self-adhering feature with an easy-to-peel plastic film on both sides of the sheet allows for installation without the need of hot asphalt or heat-welding.
Meets the requirements of ASTM D 6163, Type I, Grade G
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet, and includes fire-retardant additives.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement.
Self-Adhering Modified Bitumen: The product's self-adhering feature with an easy-to-peel plastic film on the bottom side of the sheet allows for installation without the need of hot asphalt or heat-welding.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet, and includes fire-retardant additives.
Polyester Reinforcement Mat: Provides excellent tensile strength, tear resistance and flexibility.
Two-Sided Self-Adhering Modified Bitumen: The product's self-adhering feature with an easy-to-peel plastic film on both sides of the sheet allows for installation without the need of hot asphalt.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the SBS-blend sheet. The ceramic coating promotes excellent long-term adhesion.
High-Quality SBS Rubber and Asphalt Blend: Provides full recovery properties after 100% elongation and lends elasticity and flexibility to the sheet. Designed for the sharp angle changes and turns found in flashing areas.
Polyester Reinforcement Mat: The 170 g/m2 polyester mat provides excellent tensile strength, tear resistance and flexibility.
Self-Adhering Modified Bitumen: The product's self-adhering feature with an easy-to-peel plastic film on the bottom side of the sheet allows for installation without the need of hot asphalt.
Material meets the requirements of ASTM D 4897, Type II
Ventsulation Felt may be used as a base sheet for any built up roofing or modified bitumen roofing system to be installed over a substrate that potentially contains moisture.
1" Embossed Waffle Pattern Grid Channels: Promotes moisture vapor venting. Helps prevent blistering of asphalt-based roofs when installed over potential moisture-containing substrates such as: Re-covers over existing roof membranes, lightweight insulating fill or gypsum decks.
Fiber Glass Reinforcement Mat: Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic base sheets. Provides a solid dimensionally stable substrate for other roofing membrane components.
Surfacing: Coarse minerals on one side.
Tri-laminate woven polyethylene, nonslip, UV-protected top surface: Provides temporary weather protection for 90 days. Provides high tensile strength and puncture resistance.
Self-sealing, high-quality SBS rubber and asphalt blend: Provides low air and vapor permeability.
Silicone release film: Allows for ease of self-adhering installation.
Tri-laminate woven polyethylene, nonslip, UV-protected top surface: Provides temporary weather protection for 90 days. Provides high tensile strength and puncture resistance.
Self-adhering modified bitumen: Self-sealing, high-quality SBS rubber and asphalt blend: provides low air and vapor permeability.
Split-back silicone release film: Easy-to-peel release film sheet that allows for ease of self-adhering installation.
SBS Roofing Accessories
Reflective Roofing Granules: Bright white granules specifically designed for high reflectivity and durability.
Color: Bright White
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the bitumen. These granules are colored with durable pigments, bonded in a ceramic matrix and treated to promote excellent long-term adhesion.
Colors: White
SBS Adhesives & Cements
Use: 1-Part Permaflash is a unique, one-component, elastomeric, liquid applied flashing material, consisting of an asphalt/polyurethane resin. It is formulated for use with Johns Manville (JM) modbit membrane products.
Type: One-part, elastomeric, liquid-applied flashing material.
Color: Brown
Features: Cures to a durable, elastomeric film and forms exceptional bonds between the modified bitumen and a variety of penetrating materials. Single component solution with no mixing required that conforms easily to various geometries or irregular shapes. UV stable, high solids (80%), low odor.
Meets the requirements of ASTM D 41, Type II
Use: Used to prepare substrates prior to the application of hot asphalt or cold adhesives in BUR, SBS and APP modified bitumen roofing systems. Do not use Asphalt Primer as a finish coat on roofs.
Type: One-part, specification grade, penetrating priming solution.
Substrates: Compatible with concrete; gypsum; masonry; block; brick; and metal surfaces.
Color: Black Features: Low VOC and sprayable.
Use: To adhere both vertical and horizontal roof flashing surfaces. Useful for repairing leaks in metal, shingles, concrete, flashings, gutters, around chimneys, flues, soil pipes, drains, eaves, cornices and roof perimeters.
Type: One-part, low VOC, asphalt-based trowel-grade mastic.
Features: Maintains bond during varying temperatures and weather conditions, and bonds to dissimilar materials. Excellent Durability. Remains Flexible Over Time.
Color: Black
Use: For adhering SBS membranes to approved substrates.
Type: One-part, solvent free, moisture curing, elastomeric adhesive.
Color: Black/Brown
Features: A solvent and odor free, single component adhesive with no mixing required. Low VOC content suitable for use in VOC regulated markets. Cures with ambient moisture to an elastomeric solid that remains flexible to absorb dynamic stresses.
Use: JM One-Step Foamable Adhesive is a two-component polyurethane adhesive used for attaching insulation or cover boards to the roof deck or to other insulation boards.
Type: Two-part, cold application insulation adhesive.
Substrates: Compatible with the following insulations, cover boards, and substrates1 : polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete2
(Lightweight structural, poured-in-place structural, precast, and insulating); treated plywood (5/8" (1.58 cm) min. thickness); cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection).
1. Ensure that all insulation boards are 4' x 4' or smaller.
2. Drying time of 28 days required
Color: Part 1 - Tan, Part 2 - Colorless
Features: Solvent free. Set boards immediately into adhesive; reduces installation time and maximizes adhesive footprint. No hoses or pumps required. Always on ratio, eliminates guesswork.
Use: JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive used for attaching fleece-backed single ply membranes to insulation boards or various deck types as well as insulation boards to the roof deck or to other insulation boards.
Type: Two-part, cold application insulation adhesive.
Substrates: Compatible with the following insulations, cover boards, and substrates1 : polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete2 (Lightweight structural, poured-in-place structural, precast, and insulating); treated plywood (5/8" (1.58 cm) min. thickness); cementitious wood fiber; gypsum; smooth or granulated BUR, APP or SBS.
1. Ensure that all insulation boards are 4' x 4' or smaller.
2. Ensure that the concrete is adequately dry for adhesion.
Color: Part 1 - Tan, Part 2 - Colorless
Features: Solvent free, and HCFC or CFC free. Universal adhesive for adhering fleece-backed membranes and insulation boards. Sets in minutes.
Use: For applying SBS cold applied membranes and insulation/ cover board. Used as a direct substitute for hot asphalt.
Type: Two-part, solvent free, elastomeric, cold application adhesive.
Color: Black to Brown
Features: 100% solids with no volatile organic compounds (VOCs). Low odor and fast set time. Can be applied over wide temperature and humidity ranges. High strength with exceptional wind uplift performance. Ideal for those applications where hot asphalt is prohibited, not desirable or not practical.
Meets the requirements of ASTM D 3019, Type III, Grade 2.
Use: For adhering roofing plies, modified bitumen membranes and for aggregate surfacings. It can be used as a direct substitute for asphalt in all JM modified bitumen roof membrane specifications.
Type: One-part, elastomeric cold application membrane adhesive.
Color: Black
Features: Cures to form a durable, elastomeric and watertight film. Cold process – does not have to be heated. Ready for use as shipped.
Use: For use with JM BUR and SBS membrane products. It is part of the JM PermaFlash® Bituminous Flashing System for penetrations and other details. Ideal for areas where hot asphalt is prohibited, not desirable or not practical.
Type: Two-part, elastomeric, liquid-applied flashing material.
Color: Black
Features: Cures to a durable, elastomeric film and forms exceptional bonds between the modified bitumen and underlying substrate. Resists virtually all factors affecting base flashing performance while providing superior flexibility and durability. UV stable, high solids, low odor, VOC compliant.
Meets the requirements of ASTM D 4586, Type I
Use: As a substitute for asphalt and MBR® Flashing Cement in JM modified bitumen flashing details, and can be used to adhere the JM modified bitumen flashing systems and built-up roofing felts to vertical surfaces, as a general purpose mastic on most built up roofing and modified bitumen flashing details, or to strip in the laps of modified bitumen base flashings.
Type: One-part, asphalt-based, trowel-grade mastic.
Color: Black
Features: Cold process – does not have to be heated. Cures to form a durable, elastomeric and watertight film. Ready for use as shipped.
Use: To adhere modified bitumen membranes and aggregate surfacings. Use as a direct substitute for asphalt in JM SBS modified bitumen roof membrane specifications.
Type: One-part, fast set, elastomeric cold application membrane adhesive.
Color: Black
Features: Excellent wind uplift resistance. Low odor, cold process adhesive.
Use: Designed to enhance the adhesion of self-adhering membranes on approved substrates.
Type: One-part, specification grade, penetrating priming solution.
Substrates: Compatible with gypsum; concrete; fiber cement; wood; and metal surfaces.
Features: Sprayable, ideal for self-adhering membranes, achieves a tenacious bond to a variety of substrates.
Color: Red
Use: Designed to enhance the adhesion of self-adhering membranes on approved substrates.
Type: One-part, specification grade, penetrating priming solution.
Substrates: Compatible with gypsum; concrete; fiber cement; wood; and metal surfaces.
Features: Low VOC, Sprayable, ideal for self-adhering membranes, achieves a tenacious bond to a variety of substrates.
Color: Red
SBS Fasteners & Plates
All Purpose Fasteners are #14 case-hardened steel fasteners with a #3 Phillips head. The point is designed for quick installation in new or re-roof applications.
Use: Membranes and Insulation
Material: Case-hardened steel
Gauge: #14
Head: #3 Phillips head
Color: Grey
Deck Types: Wood, Concrete, and 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.
Plate Compatibility
• UltraFast® Locking Plastic Plates
• UltraFast® Metal Plates
• High Load Plates (not pictured)
• APB Plates (not pictured)
• RhinoPlate (concrete decks)
High Load Plates are heavy duty, Galvalume®*-coated steel seam plates with eye hooks.
High Load Plus Plates are heavy duty, Galvalume-coated steel seam plates with barbs.
Use: Membranes
Material: Galvalume-Coated Steel
Gauge: 20-Gauge Steel
Size: High Load Plate - 2 3⁄8" (6.03 cm) round
High Load Plus Plate - 2 3/4" (6.99 cm) round
JM 90 Seam Plate - 3" (7.62 cm) round
Color: Grey (Galvalume-coated steel)
The JM Purlin Fastener is a steel-coated fastener with a ¼" hex head and ¾" (19 mm) drill point. The drill point allows the fastener to be drilled through the purlin before the threads engage into the standing seam metal roof.
Use: Membranes
Material: Steel Coated Fasteners
Gauge: #12 Head: ¼" Hex Head
Plate: 23⁄8" (6.03 cm) round
Color: Grey
Deck Type: Structural Steel Purlins 12 - 18 gauge (2.77 mm - 1.25 mm) Metal.
LWC Pre-Assembled Base Sheet Fasteners are twin-legged, expanding base sheet fasteners with 2.7" (6.9 cm) Galvalume®- coated steel plates.
Use: Base Sheets
Fastener: Twin-Legged Steel
Plate: Galvalume-Coated Steel
Color: Black (fasteners), Grey (plates)
Deck Type: Lightweight insulating concrete roof decks, with minimum thickness of 1.25" (3.18 cm), and 1.25" (3.18 cm) for gypsum decks.
.
Lite-Deck Fasteners are available in lengths from 2 5/8" to 12" (67 mm to 305 mm), come with a square drive and offer coarse thread to provide high pullout resistance.
Lite-Deck plates are 3" (76 mm) round, Galvalume®-coated plates for use with Lite-Deck Fasteners.
Use: Insulation
Fastener: Steel
Head: #3 Square Drive
Plate: 3" (76 mm) Galvalume-Coated Steel - Round
Color: Black (fasteners) Grey (plates)
Deck Type: Gypsum, and Cementitious Wood Fiber
Polymer Auger Fasteners are glass-reinforced nylon fasteners with an internal ¼" (6 mm) square drive. Polymer Auger Fasteners have a 1" (2.5 cm) diameter head.
Polymer Auger Fasteners are available with Galvalume®-coated, metal stress plates, designed to lock into the fastener head.
Use: Insulation and Membranes
Material: Fasteners - Polymer
Plates - Galvalume-Coated Steel
Gauge: 0.675" Diameter Screw
Head: 1" (2.5 cm) Diameter, ¼" (6 mm) Square Drive
Plates: 2" (5.1 cm) or 3" (7.6 cm) Round
Color: Black (fasteners), Grey (plates)
Deck Types: Cementitious Wood Fiber or Gypsum
Structural Concrete Deck Fasteners are diamond point, non-threaded fasteners for hammer-in installation of insulation and single ply membranes to structural concrete. These carbon steel fasteners have a corrosion-resistant coating.
Use: Insulation and Membranes
Material: Diamond Point, Corrosion-Resistant Coated Carbon Steel
Head: Flat
Color: Black
Deck Type: Structural Concrete
Plate Compatibility
UltraFast® Flat-Bottom, Metal Plates
APB Plates
High Load Plates
The UltraFast AccuTrac Fastener and Plate System utilizes the standard UltraFast Fastener and the UltraFast Accutrac, recessed or flat bottomed, square plate. The AccuTrac tool positions the plate and installs fasteners 15⁄8" - 6" (4.13 cm - 15.24 cm) in a one-step process. Consistent vertical alignment of fasteners ensures maximum thread engagement and pullout performance.
Use: Membranes
Material: Fasteners - Case-Hardened Steel
Plates - Galvalume®-Coated Steel
Gauge: #12
Head: #3 Phillips Head
Plate: UltraFast AccuTrac™ - 3" (7.62 cm) Square
Color: Blue (fasteners), Grey (plates)
Deck Type: Wood or 18 - 24 gauge (1.25 mm - 0.51 mm) Metal.
The UltraFast Fastener is a #12, case-hardened steel, polymer-coated fastener with a buttress thread design that provides maximum pullout values and minimizes fastener backout. Available with either a #3 Phillips head or a ¼" (6.35 mm) hex head. The drill point is designed for quick installation in new or re-roof applications, and provides exceptional drilling capability in higher tensile decks.
Use: Insulation
Material: Fasteners - Case-Hardened Steel, Polymer-Coated
Gauge: #12
Head: #3 Phillips Head or ¼" (6.35 mm) Hex Head
Color: Blue
Deck Types: Wood or 18 - 24 gauge (1.25 mm - 0.51 mm) Metal
UltraFast Locking Plastic Plates are 3" (7.62 cm) round, high strength polypropylene plates with a special locking feature.
UltraFast Metal Plates are 3" (7.62 mm) round or square, premium Galvalume®-coated steel metal plates.
Use: Insulation
Material: Plates - Galvalume-Coated Steel or High Strength Polypropylene
Gauge: 26 Gauge Steel
Plates: 3" (7.62 cm) Round Locking Plastic & Round or Square Metal
Colors: Grey (metal plates), Blue (plastic plates)
UltraLok Locking Impact Fasteners and Plates consist of a preassembled Galvanized steel tube, a 2.7" (6.86 cm) Galvalume®-coated steel disc, and a precision-formed, coated- steel, high tensile, wirelocking staple. The disc is securely clamped to the tube and is rib-reinforced to resist cupping.
Use: Cover Boards and Base Sheets
Material: Tube - Galvanized Steel
Plates - Galvalume-Coated Steel
Locking Staple - Coated-Steel, High Tensile Wire
Plate: 2.7" (6.86 cm) Metal - Round
Color: Grey
Deck Types: Poured Gypsum, Cementitious Wood Fiber and LWIC Lightweight Insulating Concrete
SBS Insulation & Cover Boards
Meets the requirements of ASTM C 1177
Enhanced Face Mat: Coated fiberglass facer ideal for fully adhered systems provides a broader compatibility and higher performance with roofing adhesives.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Meets the requirements of ASTM C 1177
Very Severe Hail: Achieves FM 'VSH' approval with adhered 60 or 80 mil (smooth back) JM TPO membrane and standard JM TPO membrane adhesives when 4'x4' panels are adhered in low rise foam adhesive ribbons, 12" O.C. min.
Enhanced Face Mat: Coated fiberglass facer ideal for fully adhered systems provides a broader compatibility and higher performance with roofing adhesives.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Meets the requirements of ASTM C 1325
Durability: Composed of a lightweight cementicious core to provide exceptional impact resistance.
Strength: Exceptionally high compressive strength improves overall roof system performance. Cement board is able to withstand prolonged exposure to moisture and is ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics.
Moisture and Mold Resistance: Cement based core provides superior moisture, mold, and mildew resistance. Scores a maximum "10" for mold resistance when tested per ASTM D 3273.
Meets the requirements of ASTM C 1177
Handleability: Heavy duty coated fiberglass facer ideal for fully adhered systems improves handling and strength. Scores and snaps easily.
Strength: High compressive strength improves overall roof system performance. Ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Enhanced mold resistant core and coated fiberglass facers provide mold and mildew resistance per ASTM-D 3273.
Meets the requirements of ASTM C 1177
Very Severe Hail: JM DEXcell FA VSH Glass Mat Roof Board meets FM 'VSH' with fully adhered JM 80 mil (smooth back) TPO membrane and standard JM TPO membrane adhesives, 4'x4' DEXcell FA VSH boards adhered in JM Roofing System Urethane Adhesive (RSUA) ribbons, 12" OC min. JM TPO FB 115 or FB 135 membranes can be adhered with JM Two-Part UIA in a splatter application, DEXcell FA VSH may be mechanically fastened or adhered with JM RSUA in ribbons, 12" OC min.
Handleability: Heavy duty coated fiberglass facer ideal for fully adhered systems improves handling and strength. Scores and snaps easily.
Strength: High compressive strength improves overall roof system performance. Ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Enhanced mold resistant core and coated fiberglass facers provide mold and mildew resistance per ASTM-D 3273.
Meets the requirements of ASTM C 728, Type 2
Polymerized Asphalt Emulsion Coating: Allows for direct application of SBS or APP membranes using torch application techniques, and does not require pre-heating like heavily coated boards. This allows for fuel savings and labor efficiency by eliminating fasteners with a mechanically fastened base sheet.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and fire resistance.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
High Density: Provides additional strength and durability.
Meets the following requirements:
ENRGY 3 / Tapered ENRGY 3
• CAN/ULC S704, Type 2, Class 3 (140 kPa)
• ASTM C 1289, Type II, Class 1, Grade 2 ENRGY 3 25 PSI / Tapered
ENRGY 3 25 PSI
• CAN/ULC S704, Type 3, Class 3 (170 kPa)
• ASTM C 1289, Type II, Class 1, Grade 3
Glass-Reinforced Facers: Provides rigidity and resistance to indentation and crushing, and are compatible with BUR, modified bitumen and single ply membrane systems.
Closed Cell Polyisocyanurate Foam Core: Provides high R-value per inch in built-up, modified bitumen, metal roof and single ply roof systems, and utilizes a zero ozone depletion blowing agent that provides high thermal insulation performance.
Meets the following requirements:
ENRGY 3 CGF / Tapered ENRGY 3 CGF
• CAN/ULC S704, Type 2, Class 3 (140 kPa)
• ASTM C 1289, Type II, Class 2, Grade 2
ENRGY 3 25 PSI CGF / Tapered ENRGY 3 25 PSI CGF
• CAN/ULC S704, Type 3, Class 3 (170 kPa)
• ASTM C 1289, Type II, Class 2, Grade 3
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in fully adhered single ply systems.
Closed Cell Polyisocyanurate Foam Core: Provides high R-value per inch in built-up, modified bitumen, metal roof and single ply roof systems, and utilizes an environmentally compliant blowing agent that provides high thermal insulation performance.
Expanded Perlite: Provides good dimensional stability and excellent insulation value with stable R-value. The high perlite content offers far greater fire resistance than conventional wood fiber materials.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL® Environment to certify the recycled content and contributes to the LEED® Materials and Resource (MR) credit 4.
FesCant Plus Cant Strips: Manufactured from JM Cant Board, a high-density, laminated perlite board that provides excellent transition from the deck to the wall of the roof.
Tapered FESCO Edge Strips: Excellent for transitioning from membrane to nailer, or transitioning from Tapered FESCO®, Tapered ENRGY 3®, or Tapered Fesco Foam® panels to the roof level to help promote positive drainage.
Meets the requirements of ASTM C 728, Type 1
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive asphalt absorption in hot-asphalt applied roofing systems.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and fire resistance.
Low Thermal Insulation Board: Composed of expanded perlite, reinforcing cellulosic fibers and selected binders.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL® Environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
Hot Asphalt Friendly: Protective cover board or low thermal insulation board proven to reduce the tendency for blistering in hot asphalt applications.
Meets the requirements of ASTM C 728, Type 2
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive asphalt absorption in hot-asphalt applied roofing systems.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and superior fire resistance.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
High Density: Allows for installations directly over a wide flute or metal deck application for spans up to 2½" and resists damage from construction and maintenance.
Hot Asphalt Friendly: Can be used as a cover board in re-roofing and new construction, proven to reduce the tendency for blistering in hot asphalt applications.
Meets the requirements of ASTM C 728, Type 2
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive asphalt absorption in hot-asphalt applied roofing systems.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and fire resistance.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
Hot Asphalt Friendly: Utility board for use as a divorcing layer in re-roofing and in new construction as a top layer in multi-layer insulation systems proven to reduce the tendency for blistering in hot asphalt applications.
Meets the requirements of ASTM C 1289, Type II, Class 4, Grade 1
High-Density Polyisocyanurate Foam Core: Closed cell polyisocyanurate foam technology provides additional insulation value (R-value of 2.5), with lightweight and low water absorption characteristics.
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in adhered single ply systems.
Lightweight: Offers labor and installation efficiencies and allows more options for situations where the overall weight is a concern. This also means easy hoisting, staging and maneuvering around the roof.
High R-Value (2.5 R): Provides significantly more thermal insulation (R-value) than wood fiber or gypsum boards.
User Friendly: ProtectoR HD allows easy & efficient scoring, cutting and snapping which permits fast, tight fabrication and all in a low dust environment.
Resistance To Damage: High impact, flexural and compressive strength pro- vides a protective layer for insulation while working with the membrane above to ensure maximum performance and longevity.
Up to 50% Fewer Fasteners: Achieves FM 1-90 utilizing 8 fasteners per 4'x8'boardwithanadhered reinforcedmembraneand11fastenersper 4'x 8' board with an adhered non-reinforced membrane over a min. 22 ga steel deckorstructuralconcretedeck.
Meets the requirements of ASTM C 728, Type 3
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive adhesive absorption in hot-asphalt and cold applied roofing systems, and to provide a strong surface for bonding bituminous membranes.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and superior fire resistance.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
High Density: Provides additional strength and durability over 1/2" Retro-Fit Board with low moisture content and water resistance compared to wood fiber board.
Meets the requirements of ASTM C 1325
Ideal for liquid applied membrane roof systems.
Strength: Engineered to provide superior wind-uplift performance for a wide variety of roof assemblies. The board is formed using an aggregated portland cement slurry with a polymer-coated, glass-fiber mesh completely encompassing edges and both surfaces, to enhance bond strength of membrane systems and gives excellent resistance to delamination.
Fire Performance: Provides excellent fire performance with unlimited slope classifications and is non-combustable per UL 790.
Moisture and Mold Resistance: Cement based, highly water durable board, scored a maximum "10" for mold resistance when tested per ASTM D 3273.
Meets the requirements of ASTM C 1278
Strength: Engineered to provide high wind-uplift performance. Uniform composition providing enhanced bond strength of membrane systems with no risk of facer delamination.
Fire Performance: Provides excellent fire performance, and demonstrates exceptional surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Integral water-resistant core scored a maximum "10" for mold resistance when tested per ASTM D 3273.
Meets the requirements of ASTM C 1289, Type II, Class 2, Grade 3
Closed Cell Polyisocyanurate Foam Core: Closed cell polyisocyanurate foam technology provides additional insulation value with lightweight and low water absorption characteristics.
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in adhered single ply systems.
High R-Value (2.9 R): Has more than two times the R-value of wood fiber and more than four times the R-value of gypsum boards.
User Friendly: Allows easy and efficient scoring, cutting and snapping which permits fast, tight fabrication and all in a low dust environment.
Lightweight: Offers labor and installation efficiencies and allows more options for situations where the overall weight is a concern. This also means easy hoisting, staging and maneuvering around the roof.
Up to 50% Fewer Fasteners: Achieves FM 1-90 utilizing 8 fasteners per 4'x8'boardwithanadhered reinforcedmembraneand11fastnersper 4'x 8' board with an adhered non-reinforced membrane over a min. 22 ga steel deckorstructuralconcretedeck.
Meets the requirements of ASTM C 728, Type 1
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive asphalt absorption in hot-asphalt applied roofing systems.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and fire resistance.
Tapered Design: Factory cut taper, that is easy to install and cut, builds slope into an otherwise flat roofing system, allowing water to drain freely off the roof.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
Hot Asphalt Friendly: Perlite board proven to reduce the tendency for blistering in hot asphalt applications.
APP Roofing Systems
Meets the requirements of ASTM D 6222, Type I, Grade G
APPeX 4.5M is used as a cap or flashing sheet in APP multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the APP-blended sheet. The ceramic coating promotes excellent long-term adhesion.
APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Polyester Reinforcement Mat: Provides bidirectional glass-scrim reinforcement and offers robust tear strength and puncture resistance, allowing for high wind performance and excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets the requirements of ASTM D 6222, Type I, Grade G
APPeX 4.5M CR G is used as a polyester-reinfored cool roof cap or flashing sheet in APP multi-ply roofing systems.
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the APP modified bitumen sheet.
APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Polyester Reinforcement Mat: Provides bidirectional glass-scrim reinforcement and offers robust tear strength and puncture resistance, allowing for high wind performance and excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets the requirements of ASTM D 6222, Type I, Grade G
APPeX 4.5M FR is used as a cap or flashing sheet in APP multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the APP-blended sheet. The ceramic coating promotes excellent long-term adhesion.
Premium APP (Atactic Polypropylene) Polymer, Asphalt and Fire-Retardant Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Polyester Reinforcement Mat: Provides bidirectional glass-scrim reinforcement and offers robust tear strength and puncture resistance, allowing for high wind performance and excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets the requirements of ASTM D 6222, Type I, Grade G
APPeX 4.5M FR CR G is used as a polyester-reinfored cool roof cap or flashing sheet in APP multi-ply roofing systems.
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the APP modified bitumen sheet.
APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Polyester Reinforcement Mat: Provides bidirectional glass-scrim reinforcement and offers robust tear strength and puncture resistance, allowing for high wind performance and excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets the requirements of ASTM D 6222, Type I, Grade S
APPeX 4S is used as a cap or base sheet in APP multi-ply roofing systems.
Premium APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Polyester Reinforcement Mat: Provides bidirectional glass-scrim reinforcement and offers robust tear strength and puncture resistance, allowing for high wind performance and excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Surfacing: Fine mineral parting agent on the top of the sheet. A polyolefin burn-off film on the bottom side enables the product to be applied using heat-welding techniques.
Meets the requirements of ASTM D 6222, Type I, Grade S
APPeX 4S is used as a cap or base sheet in APP multi-ply roofing systems.
Premium APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Polyester Reinforcement Mat: Provides bidirectional glass-scrim reinforcement and offers robust tear strength and puncture resistance, allowing for high wind performance and excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Surfacing: Fine mineral parting agent on the top of the sheet. A polyolefin burn-off film on the bottom side enables the product to be applied using heat-welding techniques.
Meets the requirements of ASTM D 6223, Type I, Grade G
BICOR M FR is used as a premium cap or flashing sheet in APP multi-ply roofing systems.
Ceramic-coated Roofing Granules: Specifically engineered for optimal embedment in the APP-blended sheet. The ceramic coating promotes excellent long-term adhesion. Granules are available in white, black and tan (Black and tan may require extended lead times).
Premium APP (Atactic Polypropylene) Polymer, Asphalt and Fire-Retardant Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: Fine mineral parting agent on the bottom side. Enables the product to be applied in cold adhesive or heat welding techniques.
Meets the requirements of ASTM D 6223, Type I, Grade S
BICOR S is used as a premium base or ply sheet in APP multi-ply roofing systems.
Premium APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: Fine mineral parting agent on both sides of the sheet. Enables the product to be applied in cold adhesive or heat welding techniques.
DIBITEN is a superior APP modified bitumen membrane reinforced with a high-quality nonwoven polyester mat and is one of the finest heat weld applied modified bitumen membranes ever produced not only for residential roofing but for commercial and industrial roofing as well.
Meets the requirements of ASTM D 6222, Type I, Grade G
DIBITEN Poly/4.5 CR G is used as a polyester-reinfored cool roof cap or flashing sheet in APP multi-ply roofing systems.
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the APP modified bitumen sheet. Each pallet of Dibiten Poly/4.5 CR G contains three bags of CR G granules to dress up bleed out.
APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Polyester Reinforcement Mat: Provides bidirectional glass-scrim reinforcement and offers robust tear strength and puncture resistance, allowing for high wind performance and excellent hail rating. The sheet also exhibits strong dimensional stability and enhanced elongation.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Meets the requirements of ASTM D 6509
JM APP Base is used as a base or ply sheet in APP multi-ply roofing systems.
APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Surfacing: Fine mineral parting agent on both sides of the sheet. Enables the product to be applied using cold adhesive or heat welding techniques.
Meets the requirements of ASTM D 6509
JM APP Base 2.0 SQ is used as a base or ply sheet in APP multi-ply roofing systems.
APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Surfacing: Fine mineral parting agent on the top side of the sheet. A polyolefin burn-off film on the bottom side enables the product to be applied using heat welding techniques.
Meets the requirements of ASTM D 6509
JM APP Base Plus is used as a base or ply sheet in APP multi-ply roofing systems.
APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Fiber Glass Reinforcement Mat: Offers excellent dimensional stability and tensile strength and withstands differential movement. Because it has no thermal memory less time is needed to relax the sheet, allowing for ease of installation. The fiber glass mat also has good lay-flat characteristics.
Surfacing: Fine mineral parting agent on both sides of the sheet. Enables the product to be applied using cold adhesive or heat welding techniques.
Meets the requirements of ASTM D 6223, Type II, Grade G
TRICOR M FR is used as a premium cap or flashing sheet in APP multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the APP-blended sheet. The ceramic coating promotes excellent long-term adhesion.
Premium APP Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations. The FR blend contains additional fire-retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: Fine mineral parting agent on the bottom side. Enables the product to be applied using cold adhesive or heat-welding techniques.
Colors: Granules are available in white, black and tan. Black and tan may require extended lead times.
Meets the requirements of ASTM D 6223, Type II, Grade G
TRICOR M FR CR G is used as a premium fiber glass/polyester-reinforced cool roof cap or flashing sheet in APP multi-ply roofing systems.
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the APP modified bitumen sheet.
Premium APP Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations. The FR blend contains additional fire retardant additives.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: Fine mineral parting agent on the bottom side. Enables the product to be applied using cold adhesive or heat welding techniques.
Meets the requirements of ASTM D 6223, Type II, Grade S
TRICOR S is used as a premium base or ply sheet in APP multi-ply roofing systems.
Premium APP Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Fiber Glass/Polyester Reinforcement Mat: Combines the excellent tensile strength, toughness and puncture resistance of a polyester mat with the dimensional stability and lay-flat characteristics of fiber glass.
Surfacing: Fine mineral parting agent on both sides of the sheet. Enables the product to be applied using cold adhesive or heat welding techniques.
ValuWeld G is used as a cap or flashing sheet in APP multi-ply roofing systems.
Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the APP-blended sheet. The ceramic coating promotes excellent long-term adhesion.
APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Polyester Reinforcement Mat: Offers good tensile strength, toughness and puncture resistance and can accommodate stresses created by typical rooftop expansion and contraction forces.
Polyolefin Burn-Off Film: Promotes ease of heat welding.
Colors: White and Black only.
ValuWeld S is used as a cap or base sheet in APP multi-ply roofing systems.
Premium APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Polyester Reinforcement Mat: Offers good tensile strength, toughness and puncture resistance and can accommodate stresses created by typical rooftop expansion and contraction forces.
Surfacing: Fine mineral parting agent on the top of the sheet. A polyolefin burn-off film on the bottom side enables the product to be applied using heat-welding techniques
Material meets the requirements of ASTM D 4897, Type II
Ventsulation Felt may be used as a base sheet for any built up roofing or modified bitumen roofing system to be installed over a substrate that potentially contains moisture.
1" Embossed Waffle Pattern Grid Channels: Promotes moisture vapor venting. Helps prevent blistering of asphalt-based roofs when installed over potential moisture-containing substrates such as: Re-covers over existing roof membranes, lightweight insulating fill or gypsum decks.
Fiber Glass Reinforcement Mat: Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic base sheets. Provides a solid dimensionally stable substrate for other roofing membrane components.
Surfacing: Coarse minerals on one side.
Tri-laminate woven polyethylene, nonslip, UV-protected top surface: Provides temporary weather protection for 90 days. Provides high tensile strength and puncture resistance.
Self-sealing, high-quality SBS rubber and asphalt blend: Provides low air and vapor permeability.
Silicone release film: Allows for ease of self-adhering installation.
Tri-laminate woven polyethylene, nonslip, UV-protected top surface: Provides temporary weather protection for 90 days. Provides high tensile strength and puncture resistance.
Self-adhering modified bitumen: Self-sealing, high-quality SBS rubber and asphalt blend: provides low air and vapor permeability.
Split-back silicone release film: Easy-to-peel release film sheet that allows for ease of self-adhering installation.
APP Accessories
APP Adhesives & Cements
Use: 1-Part Permaflash is a unique, one-component, elastomeric, liquid applied flashing material, consisting of an asphalt/polyurethane resin. It is formulated for use with Johns Manville (JM) modbit membrane products.
Type: One-part, elastomeric, liquid-applied flashing material.
Color: Brown
Features: Cures to a durable, elastomeric film and forms exceptional bonds between the modified bitumen and a variety of penetrating materials. Single component solution with no mixing required that conforms easily to various geometries or irregular shapes. UV stable, high solids (80%), low odor.
Meets the requirements of ASTM D 41, Type II
Use: Used to prepare substrates prior to the application of hot asphalt or cold adhesives in BUR, SBS and APP modified bitumen roofing systems. Do not use Asphalt Primer as a finish coat on roofs.
Type: One-part, specification grade, penetrating priming solution.
Substrates: Compatible with concrete; gypsum; masonry; block; brick; and metal surfaces.
Color: Black Features: Low VOC and sprayable.
Use: To adhere both vertical and horizontal roof flashing surfaces. Useful for repairing leaks in metal, shingles, concrete, flashings, gutters, around chimneys, flues, soil pipes, drains, eaves, cornices and roof perimeters.
Type: One-part, low VOC, asphalt-based trowel-grade mastic.
Features: Maintains bond during varying temperatures and weather conditions, and bonds to dissimilar materials. Excellent Durability. Remains Flexible Over Time.
Color: Black
Use: JM One-Step Foamable Adhesive is a two-component polyurethane adhesive used for attaching insulation or cover boards to the roof deck or to other insulation boards.
Type: Two-part, cold application insulation adhesive.
Substrates: Compatible with the following insulations, cover boards, and substrates1 : polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete2
(Lightweight structural, poured-in-place structural, precast, and insulating); treated plywood (5/8" (1.58 cm) min. thickness); cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection).
1. Ensure that all insulation boards are 4' x 4' or smaller.
2. Drying time of 28 days required
Color: Part 1 - Tan, Part 2 - Colorless
Features: Solvent free. Set boards immediately into adhesive; reduces installation time and maximizes adhesive footprint. No hoses or pumps required. Always on ratio, eliminates guesswork.
Use: JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive used for attaching fleece-backed single ply membranes to insulation boards or various deck types as well as insulation boards to the roof deck or to other insulation boards.
Type: Two-part, cold application insulation adhesive.
Substrates: Compatible with the following insulations, cover boards, and substrates1 : polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete2 (Lightweight structural, poured-in-place structural, precast, and insulating); treated plywood (5/8" (1.58 cm) min. thickness); cementitious wood fiber; gypsum; smooth or granulated BUR, APP or SBS.
1. Ensure that all insulation boards are 4' x 4' or smaller.
2. Ensure that the concrete is adequately dry for adhesion.
Color: Part 1 - Tan, Part 2 - Colorless
Features: Solvent free, and HCFC or CFC free. Universal adhesive for adhering fleece-backed membranes and insulation boards. Sets in minutes.
Meets the requirements of ASTM D 3019, Type III, Grade 2.
Use: For adhering roofing plies, modified bitumen membranes and for aggregate surfacings. It can be used as a direct substitute for asphalt in all JM modified bitumen roof membrane specifications.
Type: One-part, elastomeric cold application membrane adhesive.
Color: Black
Features: Cures to form a durable, elastomeric and watertight film. Cold process – does not have to be heated. Ready for use as shipped.
Use: For use with JM BUR and SBS membrane products. It is part of the JM PermaFlash® Bituminous Flashing System for penetrations and other details. Ideal for areas where hot asphalt is prohibited, not desirable or not practical.
Type: Two-part, elastomeric, liquid-applied flashing material.
Color: Black
Features: Cures to a durable, elastomeric film and forms exceptional bonds between the modified bitumen and underlying substrate. Resists virtually all factors affecting base flashing performance while providing superior flexibility and durability. UV stable, high solids, low odor, VOC compliant.
Meets the requirements of ASTM D 4586, Type I
Use: As a substitute for asphalt and MBR® Flashing Cement in JM modified bitumen flashing details, and can be used to adhere the JM modified bitumen flashing systems and built-up roofing felts to vertical surfaces, as a general purpose mastic on most built up roofing and modified bitumen flashing details, or to strip in the laps of modified bitumen base flashings.
Type: One-part, asphalt-based, trowel-grade mastic.
Color: Black
Features: Cold process – does not have to be heated. Cures to form a durable, elastomeric and watertight film. Ready for use as shipped.
APP Fasteners & Plates
All Purpose Fasteners are #14 case-hardened steel fasteners with a #3 Phillips head. The point is designed for quick installation in new or re-roof applications.
Use: Membranes and Insulation
Material: Case-hardened steel
Gauge: #14
Head: #3 Phillips head
Color: Grey
Deck Types: Wood, Concrete, and 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.
Plate Compatibility
• UltraFast® Locking Plastic Plates
• UltraFast® Metal Plates
• High Load Plates (not pictured)
• APB Plates (not pictured)
• RhinoPlate (concrete decks)
LWC Pre-Assembled Base Sheet Fasteners are twin-legged, expanding base sheet fasteners with 2.7" (6.9 cm) Galvalume® - coated steel plates.
Use: Base Sheets
Fastener: Twin-Legged Steel
Plate: Galvalume-Coated Steel
Color: Black (fasteners), Grey (plates)
Deck Type: Lightweight insulating concrete roof decks, with minimum thickness of 1.25" (3.18 cm), and 1.25" (3.18 cm) for gypsum decks.
Lite-Deck Fasteners are available in lengths from 2 5/8" to 12" (67 mm to 305 mm), come with a square drive and offer coarse thread to provide high pullout resistance.
Lite-Deck plates are 3" (76 mm) round, Galvalume®*-coated plates for use with Lite-Deck Fasteners.
Use: Insulation
Fastener: Steel
Head: #3 Square Drive
Plate: 3" (76 mm) Galvalume-Coated Steel - Round
Color: Black (fasteners) Grey (plates)
Deck Type: Gypsum, and Cementitious Wood Fiber
Polymer Auger Fasteners are glass-reinforced nylon fasteners with an internal ¼" (6 mm) square drive. Polymer Auger Fasteners have a 1" (2.5 cm) diameter head.
Polymer Auger Fasteners are available with Galvalume® -coated, metal stress plates, designed to lock into the fastener head.
Use: Insulation and Membranes
Material: Fasteners - Polymer Plates - Galvalume-Coated Steel
Gauge: 0.675" Diameter Screw
Head: 1" (2.5 cm) Diameter, ¼" (6 mm) Square Drive
Plates: 2" (5.1 cm) or 3" (7.6 cm) Round
Color: Black (fasteners), Grey (plates)
Deck Types: Cementitious Wood Fiber or Gypsum
Structural Concrete Deck Fasteners are diamond point, non-threaded fasteners for hammer-in installation of insulation and single ply membranes to structural concrete. These carbon steel fasteners have a corrosion-resistant coating.
Use: Insulation and Membranes
Material: Diamond Point, Corrosion-Resistant Coated Carbon Steel
Head: Flat
Color: Black
Deck Type: Structural Concrete
Plate Compatibility
UltraFast® Flat-Bottom, Metal Plates
APB Plates
High Load Plates
The UltraFast AccuTrac Fastener and Plate System utilizes the standard UltraFast Fastener and the UltraFast Accutrac, recessed or flat bottomed, square plate. The AccuTrac tool positions the plate and installs fasteners 15⁄8" - 6" (4.13 cm - 15.24 cm) in a one-step process. Consistent vertical alignment of fasteners ensures maximum thread engagement and pullout performance.
Use: Membranes
Material: Fasteners - Case-Hardened Steel Plates - Galvalume®-Coated Steel
Gauge: #12
Head: #3 Phillips Head
Plate: UltraFast AccuTrac™ - 3" (7.62 cm) Square
Color: Blue (fasteners), Grey (plates)
Deck Type: Wood or 18 - 24 gauge (1.25 mm - 0.51 mm) Metal.
The UltraFast Fastener is a #12, case-hardened steel, polymer-coated fastener with a buttress thread design that provides maximum pullout values and minimizes fastener backout. Available with either a #3
Phillips head or a ¼" (6.35 mm) hex head. The drill point is designed for quick installation in new or re-roof applications, and provides exceptional drilling capability in higher tensile decks.
Use: Insulation
Material: Fasteners - Case-Hardened Steel, Polymer-Coated
Gauge: #12
Head: #3 Phillips Head or ¼" (6.35 mm) Hex Head
Color: Blue
Deck Types: Wood or 18 - 24 gauge (1.25 mm - 0.51 mm) Metal
UltraFast Locking Plastic Plates are 3" (7.62 cm) round, high strength polypropylene plates with a special locking feature.
UltraFast Metal Plates are 3" (7.62 mm) round or square, premium Galvalume®-coated steel metal plates.
Use: Insulation
Material: Plates - Galvalume-Coated Steel or High Strength Polypropylene
Gauge: 26 Gauge Steel
Plates: 3" (7.62 cm) Round Locking Plastic & Round or Square Metal
Colors: Grey (metal plates), Blue (plastic plates)
UltraLok Locking Impact Fasteners and Plates consist of a preassembled Galvanized steel tube, a 2.7" (6.86 cm) Galvalume®-coated steel disc, and a precision-formed, coated- steel, high tensile, wirelocking staple. The disc is securely clamped to the tube and is rib-reinforced to resist cupping.
Use: Cover Boards and Base Sheets
Material: Tube - Galvanized Steel
Plates - Galvalume-Coated Steel
Locking Staple - Coated-Steel, High Tensile Wire
Plate: 2.7" (6.86 cm) Metal - Round
Color: Grey
Deck Types: Poured Gypsum, Cementitious Wood Fiber and LWIC Lightweight Insulating Concrete
APP Insulation & Cover Boards
Meets the requirements of ASTM C 1177
Enhanced Face Mat: Coated fiberglass facer ideal for fully adhered systems provides a broader compatibility and higher performance with roofing adhesives.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Meets the requirements of ASTM C 1177
Very Severe Hail: Achieves FM 'VSH' approval with adhered 60 or 80 mil (smooth back) JM TPO membrane and standard JM TPO membrane adhesives when 4'x4' panels are adhered in low rise foam adhesive ribbons, 12" O.C. min.
Enhanced Face Mat: Coated fiberglass facer ideal for fully adhered systems provides a broader compatibility and higher performance with roofing adhesives.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Meets the requirements of ASTM C 1325
Durability: Composed of a lightweight cementicious core to provide exceptional impact resistance.
Strength: Exceptionally high compressive strength improves overall roof system performance. Cement board is able to withstand prolonged exposure to moisture and is ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics.
Moisture and Mold Resistance: Cement based core provides superior moisture, mold, and mildew resistance. Scores a maximum "10" for mold resistance when tested per ASTM D 3273
Meets the requirements of ASTM C 1177
Handleability: Heavy duty coated fiberglass facer ideal for fully adhered systems improves handling and strength. Scores and snaps easily.
Strength: High compressive strength improves overall roof system performance. Ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Enhanced mold resistant core and coated fiberglass facers provide mold and mildew resistance per ASTM-D 32
Meets the requirements of ASTM C 1177
Very Severe Hail: JM DEXcell FA VSH Glass Mat Roof Board meets FM 'VSH' with fully adhered JM 80 mil (smooth back) TPO membrane and standard JM TPO membrane adhesives, 4'x4' DEXcell FA VSH boards adhered in JM Roofing System Urethane Adhesive (RSUA) ribbons, 12" OC min. JM TPO FB 115 or FB 135 membranes can be adhered with JM Two-Part UIA in a splatter application, DEXcell FA VSH may be mechanically fastened or adhered with JM RSUA in ribbons, 12" OC min.
Handleability: Heavy duty coated fiberglass facer ideal for fully adhered systems improves handling and strength. Scores and snaps easily.
Strength: High compressive strength improves overall roof system performance. Ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Enhanced mold resistant core and coated fiberglass facers provide mold and mildew resistance per ASTM-D 3273.
Meets the requirements of ASTM C 728, Type 2
Polymerized Asphalt Emulsion Coating: Allows for direct application of SBS or APP membranes using torch application techniques, and does not require pre-heating like heavily coated boards. This allows for fuel savings and labor efficiency by eliminating fasteners with a mechanically fastened base sheet.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and fire resistance.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
High Density: Provides additional strength and durability.
Meets the following requirements:
ENRGY 3 / Tapered ENRGY 3
• CAN/ULC S704, Type 2, Class 3 (140 kPa)
• ASTM C 1289, Type II, Class 1, Grade 2 ENRGY 3 25 PSI / Tapered
ENRGY 3 25 PSI
• CAN/ULC S704, Type 3, Class 3 (170 kPa)
• ASTM C 1289, Type II, Class 1, Grade 3
Glass-Reinforced Facers: Provides rigidity and resistance to indentation and crushing, and are compatible with BUR, modified bitumen and single ply membrane systems.
Closed Cell Polyisocyanurate Foam Core: Provides high R-value per inch in built-up, modified bitumen, metal roof and single ply roof systems, and utilizes a zero ozone depletion blowing agent that provides high thermal insulation performance.
Meets the following requirements:
ENRGY 3 CGF / Tapered ENRGY 3 CGF
• CAN/ULC S704, Type 2, Class 3 (140 kPa)
• ASTM C 1289, Type II, Class 2, Grade 2
ENRGY 3 25 PSI CGF / Tapered ENRGY 3 25 PSI CGF
• CAN/ULC S704, Type 3, Class 3 (170 kPa)
• ASTM C 1289, Type II, Class 2, Grade 3
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in fully adhered single ply systems.
Closed Cell Polyisocyanurate Foam Core: Provides high R-value per inch in built-up, modified bitumen, metal roof and single ply roof systems, and utilizes an environmentally compliant blowing agent that provides high thermal insulation performance.
Expanded Perlite: Provides good dimensional stability and excellent insulation value with stable R-value. The high perlite content offers far greater fire resistance than conventional wood fiber materials.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL® Environment to certify the recycled content and contributes to the LEED® Materials and Resource (MR) credit 4.
FesCant Plus Cant Strips: Manufactured from JM Cant Board, a high-density, laminated perlite board that provides excellent transition from the deck to the wall of the roof.
Tapered FESCO Edge Strips: Excellent for transitioning from membrane to nailer, or transitioning from Tapered FESCO®, Tapered ENRGY 3®, or Tapered Fesco Foam® panels to the roof level to help promote positive drainage.
Meets the requirements of ASTM C 1289, Type II, Class 4, Grade 1
High-Density Polyisocyanurate Foam Core: Closed cell polyisocyanurate foam technology provides additional insulation value (R-value of 2.5), with lightweight and low water absorption characteristics.
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in adhered single ply systems.
Lightweight: Offers labor and installation efficiencies and allows more options for situations where the overall weight is a concern. This also means easy hoisting, staging and maneuvering around the roof.
High R-Value (2.5 R): Provides significantly more thermal insulation (R-value) than wood fiber or gypsum boards.
User Friendly: ProtectoR HD allows easy & efficient scoring, cutting and snapping which permits fast, tight fabrication and all in a low dust environment.
Resistance To Damage: High impact, flexural and compressive strength pro- vides a protective layer for insulation while working with the membrane above to ensure maximum performance and longevity.
Up to 50% Fewer Fasteners: Achieves FM 1-90 utilizing 8 fasteners per 4'x8'boardwithanadhered reinforcedmembraneand11fastenersper 4'x 8' board with an adhered non-reinforced membrane over a min. 22 ga steel deck or structural concrete deck.
Meets the requirements of ASTM C 728, Type 3
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive adhesive absorption in hot-asphalt and cold applied roofing systems, and to provide a strong surface for bonding bituminous membranes.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and superior fire resistance.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
High Density: Provides additional strength and durability over 1/2" Retro-Fit Board with low moisture content and water resistance compared to wood fiber board.
Meets the requirements of ASTM C 1325
Ideal for liquid applied membrane roof systems.
Strength: Engineered to provide superior wind-uplift performance for a wide variety of roof assemblies. The board is formed using an aggregated portland cement slurry with a polymer-coated, glass-fiber mesh completely encompassing edges and both surfaces, to enhance bond strength of membrane systems and gives excellent resistance to delamination.
Fire Performance: Provides excellent fire performance with unlimited slope classifications and is non-combustable per UL 790.
Moisture and Mold Resistance: Cement based, highly water durable board, scored a maximum "10" for mold resistance when tested per ASTM D 3273.
Meets the requirements of ASTM C 1278
Strength: Engineered to provide high wind-uplift performance. Uniform composition providing enhanced bond strength of membrane systems with no risk of facer delamination.
Fire Performance: Provides excellent fire performance, and demonstrates exceptional surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Integral water-resistant core scored a maximum "10" for mold resistance when tested per ASTM D 3273.
Meets the requirements of ASTM C 1289, Type II, Class 2, Grade 3
Closed Cell Polyisocyanurate Foam Core: Closed cell polyisocyanurate foam technology provides additional insulation value with lightweight and low water absorption characteristics.
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in adhered single ply systems.
High R-Value (2.9 R): Has more than two times the R-value of wood fiber and more than four times the R-value of gypsum boards.
User Friendly: Allows easy and efficient scoring, cutting and snapping which permits fast, tight fabrication and all in a low dust environment.
Lightweight: Offers labor and installation efficiencies and allows more options for situations where the overall weight is a concern. This also means easy hoisting, staging and maneuvering around the roof.
Up to 50% Fewer Fasteners: Achieves FM 1-90 utilizing 8 fasteners per 4'x8'boardwithanadhered reinforcedmembraneand11fastnersper 4'x 8' board with an adhered non-reinforced membrane over a min. 22 ga steel deck or structural concrete deck.
Built-Up Roofing (BUR) Systems
Meets the requirements of ASTM D 4601, Type II
GlasBase Plus is intended to be used as a base sheet in built up roofing or as a base or intermediate ply in modified bitumen systems.
SBS (Styrene-Butadiene-Styrene) Synthetic Rubber and High Quality Asphalt Blend: Brings elasticity and flexibility to the sheet; lays flat virtually eliminating wrinkles resulting in fast, efficient applications.
Fully-Coated Mat: No pinholes prevent asphalt bleed-through, eliminating splitting problems associated with excessive membrane attachment to nailable decks. Excellent nail retention properties and resistance to uplift forces. Virtually eliminates wrinkling, resulting in fast, efficient applications.
Non Porous Composition: Allows the product to be used as a ply sheet in systems that employ cold process mastics such as JM BUR Adhesive.
Fiber Glass Reinforcement Mat: Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic base sheets. Provides a solid dimensionally stable substrate for other roofing membrane components.
Surfacing: Fine mineral parting agent
Meets the requirements of ASTM D 3909
GlasKap is used as a cap sheet in a variety of built up roofing systems.
Asphalt Coated, Fiber Glass Reinforcement Mat: Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic cap sheets.
Ceramic-Coated Granules: Provide protection to the underlying bitumen and membrane, and have a low maintenance cost compared to roofs that use coatings.
Meets the requirements of ASTM D 3909
GlasKap CR G is intended to be used as a cap or flashing sheet in built up roofing systems.
Reflective Roofing Granules: Specifically engineered for high reflectivity, durability and optimal embedment in the BUR asphalt sheet.
High-Quality Asphalt Coating: Lends elasticity and flexibility to the sheet and provides waterproofing value.
Fiber Glass Reinforcement Mat: Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic cap sheets.
Color: Reflective cool roof bright white roofing granules.
Meets the requirements of ASTM D 3909
GlasKap Plus is used as a cap sheet in a variety of built up roofing systems.
SBS (Styrene-Butadiene-Styrene) Synthetic Rubber and High Quality Asphalt Blend: Brings elasticity and flexibility to the sheet; lays flat virtually eliminating wrinkles resulting in fast, efficient applications. Provides better elongation and cold flexibility properties than traditional asphaltic cap sheets.
Fiber Glass Reinforcement Mat: Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic cap sheets.
Ceramic-Coated Granules: Provide protection to the underlying bitumen and membrane, and have a low maintenance cost compared to roofs that use coatings.
Material meets the requirements of ASTM D 2178, Type IV
GlasPly IV is intended for use as an interply in any built up roofing or modified bitumen roofing system.
Excellent Porosity: Easy to handle, lays flat, minimizes workmanshiprelated problems such as fishmouths, wrinkles and ridges. Allows the product to readily accept hot asphalt and disperses it throughout the entire felt, to stabilize asphalt after cooling.
Asphalt Impregnated, Fiber Glass Reinforcement Mat: Offers consistent tensile strength and tear resistance. Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic ply sheets. Provides a solid dimensionally stable substrate for other roofing membrane components.
Laying Lines: Before the product is wound into rolls, it is imprinted with laying lines on the top surface so the roofing mechanic can install the felt with the proper exposure and provide the correct number of plies.
Surfacing: Liquid parting agent eliminates sticking when the felt is unrolled.
Material meets the requirements of ASTM D 2178, Type VI
GlasPly Premier is intended for use as an interply in any built up roofing or modified bitumen roofing system.
Excellent Porosity: Allows the product to readily accept hot asphalt and disperse it throughout the entire felt, to stabilize the asphalt after cooling.
Asphalt Impregnated, Fiber Glass Reinforcement Mat: Delivers high tensile strength to resist splitting that can be caused by rooftop stresses. Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic ply sheets. Provides a solid dimensionally stable substrate for other roofing membrane components.
Laying Lines: Before the product is wound into rolls, it is imprinted with laying lines on the top surface so the roofing mechanic can install the felt with the proper exposure and provide the correct number of plies
Surfacing: Liquid parting agent eliminates sticking when the felt is unrolled.
Meets the requirements of ASTM D 4601, Type II
GlasTite Flexible is intended to be used as a base sheet, ply sheet, or flashing membrane in built up roofing systems.
Fiber Glass/Polyester Composite Reinforcement Mat: Provides superior flexibility and conformability, making it easy and quick to install. Exceptionally high tensile strength delivers superior protection against splitting as well as excellent puncture and tear resistance to prevent damage often caused by rooftop traffic.
Ideal for Flashing Systems: Superior flexibility and conformability allows the mechanics to easily and quickly install tight flashing systems and make it ideal for all roof terminations, including parapet walls, skylights, roof penetrations, drains, vents and roof edges. GlasTite Flexible does not bridge at the cant and will not pull away from the substrate after it has been installed.
Laying Lines: Laying lines are imprinted on the top surface so the roofing mechanic can install the felt with the proper exposure and provide the correct number of plies.
Surfacing: Fine mineral parting agent
Material meets the requirements of ASTM D 4601, Type II
PermaPly 28 is designed for use as the first or base sheet in built up roofing or modified bitumen roof assemblies.
Lightweight: Exceptionally pliable, easy to handle and lays flat.
Asphalt Coating: Makes it suitable as an intermediate or ply felt in cold-applied built-up and modified bitumen roof assemblies.
Ideal for Mechanical Attachment: Use where mechanical attachment of the membrane to the roof substrate or deck is desired.
Fiber Glass Reinforcement Mat: Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic base or ply sheets. Provides a solid dimensionally stable substrate for other roofing membrane components.
Laying Lines: Laying lines are imprinted on the top surface so the roofing mechanic can install the felt with the proper exposure and provide the correct number of plies.
Surfacing: Fine mineral parting agent.
Material meets the requirements of ASTM D 4897, Type II
Ventsulation Felt may be used as a base sheet for any built up roofing or modified bitumen roofing system to be installed over a substrate that potentially contains moisture.
1" Embossed Waffle Pattern Grid Channels: Promotes moisture vapor venting. Helps prevent blistering of asphalt-based roofs when installed over potential moisture-containing substrates such as: Re-covers over existing roof membranes, lightweight insulating fill or gypsum decks.
Fiber Glass Reinforcement Mat: Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic base sheets. Provides a solid dimensionally stable substrate for other roofing membrane components.
Surfacing: Coarse minerals on one side.
Tri-laminate woven polyethylene, nonslip, UV-protected top surface: Provides temporary weather protection for 90 days. Provides high tensile strength and puncture resistance.
Self-sealing, high-quality SBS rubber and asphalt blend: Provides low air and vapor permeability.
Silicone release film: Allows for ease of self-adhering installation.
Tri-laminate woven polyethylene, nonslip, UV-protected top surface: Provides temporary weather protection for 90 days. Provides high tensile strength and puncture resistance.
Self-adhering modified bitumen: Self-sealing, high-quality SBS rubber and asphalt blend: provides low air and vapor permeability.
Split-back silicone release film: Easy-to-peel release film sheet that allows for ease of self-adhering installation.
Built-Up Roofing (BUR) Systems Accessories
Built-Up Roofing (BUR) Systems Adhesives & Cements
Use: 1-Part Permaflash is a unique, one-component, elastomeric, liquid applied flashing material, consisting of an asphalt/polyurethane resin. It is formulated for use with Johns Manville (JM) modbit membrane products.
Type: One-part, elastomeric, liquid-applied flashing material.
Color: Brown
Features: Cures to a durable, elastomeric film and forms exceptional bonds between the modified bitumen and a variety of penetrating materials. Single component solution with no mixing required that conforms easily to various geometries or irregular shapes. UV stable, high solids (80%), low odor.
Meets the requirements of ASTM D 4586, Type I
Use: As a substitute for asphalt and MBR® Flashing Cement in JM modified bitumen flashing details, and can be used to adhere the JM modified bitumen flashing systems and built-up roofing felts to vertical surfaces, as a general purpose mastic on most built up roofing and modified bitumen flashing details, or to strip in the laps of modified bitumen base flashings.
Type: One-part, asphalt-based, trowel-grade mastic.
Color: Black
Features: Cold process – does not have to be heated. Cures to form a durable, elastomeric and watertight film. Ready for use as shipped.
Use: For use with JM BUR and SBS membrane products. It is part of the JM PermaFlash® Bituminous Flashing System for penetrations and other details. Ideal for areas where hot asphalt is prohibited, not desirable or not practical.
Type: Two-part, elastomeric, liquid-applied flashing material.
Color: Black
Features: Cures to a durable, elastomeric film and forms exceptional bonds between the modified bitumen and underlying substrate. Resists virtually all factors affecting base flashing performance while providing superior flexibility and durability. UV stable, high solids, low odor, VOC compliant.
Use: JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive used for attaching fleece-backed single ply membranes to insulation boards or various deck types as well as insulation boards to the roof deck or to other insulation boards.
Type: Two-part, cold application insulation adhesive.
Substrates: Compatible with the following insulations, cover boards, and substrates1 : polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete2 (Lightweight structural, poured-in-place structural, precast, and insulating); treated plywood (5/8" (1.58 cm) min. thickness); cementitious wood fiber; gypsum; smooth or granulated BUR, APP or SBS.
1. Ensure that all insulation boards are 4' x 4' or smaller.
2. Ensure that the concrete is adequately dry for adhesion.
Color: Part 1 - Tan, Part 2 - Colorless
Features: Solvent free, and HCFC or CFC free. Universal adhesive for adhering fleece-backed membranes and insulation boards. Sets in minutes.
Use: JM One-Step Foamable Adhesive is a two-component polyurethane adhesive used for attaching insulation or cover boards to the roof deck or to other insulation boards.
Type: Two-part, cold application insulation adhesive.
Substrates: Compatible with the following insulations, cover boards, and substrates1 : polyisocyanurate; HD wood fiber; perlite; Invinsa® Roof Board; gypsum; concrete2
(Lightweight structural, poured-in-place structural, precast, and insulating); treated plywood (5/8" (1.58 cm) min. thickness); cementitious wood fiber plank; base sheets; gypsum; and some existing smooth-surfaced asphalt (per inspection).
1. Ensure that all insulation boards are 4' x 4' or smaller.
2. Drying time of 28 days required
Color: Part 1 - Tan, Part 2 - Colorless
Features: Solvent free. Set boards immediately into adhesive; reduces installation time and maximizes adhesive footprint. No hoses or pumps required. Always on ratio, eliminates guesswork.
Use: To adhere both vertical and horizontal roof flashing surfaces. Useful for repairing leaks in metal, shingles, concrete, flashings, gutters, around chimneys, flues, soil pipes, drains, eaves, cornices and roof perimeters.
Type: One-part, low VOC, asphalt-based trowel-grade mastic.
Features: Maintains bond during varying temperatures and weather conditions, and bonds to dissimilar materials. Excellent Durability. Remains Flexible Over Time.
Color: Black
Meets the requirements of ASTM D 41, Type II
Use: Used to prepare substrates prior to the application of hot asphalt or cold adhesives in BUR, SBS and APP modified bitumen roofing systems. Do not use Asphalt Primer as a finish coat on roofs.
Type: One-part, specification grade, penetrating priming solution.
Substrates: Compatible with concrete; gypsum; masonry; block; brick; and metal surfaces.
Color: Black Features: Low VOC and sprayable.
Built-Up Roofing (BUR) Systems Fasteners & Plates
All Purpose Fasteners are #14 case-hardened steel fasteners with a #3 Phillips head. The point is designed for quick installation in new or re-roof applications.
Use: Membranes and Insulation
Material: Case-hardened steel
Gauge: #14
Head: #3 Phillips head
Color: Grey
Deck Types: Wood, Concrete, and 18 - 24 gauge (1.25 mm - 0.56 mm) Metal.
Plate Compatibility
• UltraFast® Locking Plastic Plates
• UltraFast® Metal Plates
• High Load Plates (not pictured)
• APB Plates (not pictured)
• RhinoPlate (concrete decks)
LWC Pre-Assembled Base Sheet Fasteners are twin-legged, expanding base sheet fasteners with 2.7" (6.9 cm) Galvalume®- coated steel plates.
Use: Base Sheets
Fastener: Twin-Legged Steel
Plate: Galvalume-Coated Steel
Color: Black (fasteners), Grey (plates)
Deck Type: Lightweight insulating concrete roof decks, with minimum thickness of 1.25" (3.18 cm), and 1.25" (3.18 cm) for gypsum decks.
Lite-Deck Fasteners are available in lengths from 2 5/8" to 12" (67 mm to 305 mm), come with a square drive and offer coarse thread to provide high pullout resistance.
Lite-Deck plates are 3" (76 mm) round, Galvalume®-coated plates for use with Lite-Deck Fasteners.
Use: Insulation
Fastener: Steel
Head: #3 Square Drive
Plate: 3" (76 mm) Galvalume-Coated Steel - Round
Color: Black (fasteners) Grey (plates)
Deck Type: Gypsum, and Cementitious Wood Fiber
Polymer Auger Fasteners are glass-reinforced nylon fasteners with an internal ¼" (6 mm) square drive. Polymer Auger Fasteners have a 1" (2.5 cm) diameter head.
Polymer Auger Fasteners are available with Galvalume®-coated, metal stress plates, designed to lock into the fastener head.
Use: Insulation and Membranes
Material: Fasteners - Polymer
Plates - Galvalume-Coated Steel
Gauge: 0.675" Diameter Screw
Head: 1" (2.5 cm) Diameter, ¼" (6 mm) Square Drive
Plates: 2" (5.1 cm) or 3" (7.6 cm) Round
Color: Black (fasteners), Grey (plates)
Deck Types: Cementitious Wood Fiber or Gypsum
Structural Concrete Deck Fasteners are diamond point, non-threaded fasteners for hammer-in installation of insulation and single ply membranes to structural concrete. These carbon steel fasteners have a corrosion-resistant coating.
Use: Insulation and Membranes
Material: Diamond Point, Corrosion-Resistant Coated Carbon Steel
Head: Flat
Color: Black
Deck Type: Structural Concrete
Plate Compatibility
UltraFast® Flat-Bottom, Metal Plates
APB Plates
High Load Plates
The UltraFast AccuTrac Fastener and Plate System utilizes the standard UltraFast Fastener and the UltraFast Accutrac, recessed or flat bottomed, square plate. The AccuTrac tool positions the plate and installs fasteners 15⁄8" - 6" (4.13 cm - 15.24 cm) in a one-step process. Consistent vertical alignment of fasteners ensures maximum thread engagement and pullout performance.
Use: Membranes
Material: Fasteners - Case-Hardened Steel
Plates - Galvalume®-Coated Steel
Gauge: #12
Head: #3 Phillips Head
Plate: UltraFast AccuTrac™ - 3" (7.62 cm) Square
Color: Blue (fasteners), Grey (plates)
Deck Type: Wood or 18 - 24 gauge (1.25 mm - 0.51 mm) Metal.
The UltraFast Fastener is a #12, case-hardened steel, polymer-coated fastener with a buttress thread design that provides maximum pullout values and minimizes fastener backout. Available with either a #3
Phillips head or a ¼" (6.35 mm) hex head. The drill point is designed for quick installation in new or re-roof applications, and provides exceptional drilling capability in higher tensile decks.
Use: Insulation
Material: Fasteners - Case-Hardened Steel, Polymer-Coated
Gauge: #12
Head: #3 Phillips Head or ¼" (6.35 mm) Hex Head
Color: Blue
Deck Types: Wood or 18 - 24 gauge (1.25 mm - 0.51 mm) Metal
UltraFast Locking Plastic Plates are 3" (7.62 cm) round, high strength polypropylene plates with a special locking feature.
UltraFast Metal Plates are 3" (7.62 mm) round or square, premium Galvalume®-coated steel metal plates.
Use: Insulation
Material: Plates - Galvalume-Coated Steel or High Strength Polypropylene
Gauge: 26 Gauge Steel
Plates: 3" (7.62 cm) Round Locking Plastic & Round or Square Metal
Colors: Grey (metal plates), Blue (plastic plates)
UltraLok Locking Impact Fasteners and Plates consist of a preassembled Galvanized steel tube, a 2.7" (6.86 cm) Galvalume®-coated steel disc, and a precision-formed, coated- steel, high tensile, wirelocking staple. The disc is securely clamped to the tube and is rib-reinforced to resist cupping.
Use: Cover Boards and Base Sheets
Material: Tube - Galvanized Steel
Plates - Galvalume-Coated Steel
Locking Staple - Coated-Steel, High Tensile Wire
Plate: 2.7" (6.86 cm) Metal - Round
Color: Grey
Deck Types: Poured Gypsum, Cementitious Wood Fiber and LWIC Lightweight Insulating Concrete
Built-Up Roofing (BUR) Systems Insulation & Cover Boards
Meets the requirements of ASTM C 1177
Enhanced Face Mat: Coated fiberglass facer ideal for fully adhered systems provides a broader compatibility and higher performance with roofing adhesives.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Meets the requirements of ASTM C 1177
Very Severe Hail: Achieves FM 'VSH' approval with adhered 60 or 80 mil (smooth back) JM TPO membrane and standard JM TPO membrane adhesives when 4'x4' panels are adhered in low rise foam adhesive ribbons, 12" O.C. min.
Enhanced Face Mat: Coated fiberglass facer ideal for fully adhered systems provides a broader compatibility and higher performance with roofing adhesives.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Meets the requirements of ASTM C 1325
Durability: Composed of a lightweight cementicious core to provide exceptional impact resistance.
Strength: Exceptionally high compressive strength improves overall roof system performance. Cement board is able to withstand prolonged exposure to moisture and is ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics.
Moisture and Mold Resistance: Cement based core provides superior moisture, mold, and mildew resistance. Scores a maximum "10" for mold resistance when tested per ASTM D 3273.
Meets the requirements of ASTM C 1177
Handleability: Heavy duty coated fiberglass facer ideal for fully adhered systems improves handling and strength. Scores and snaps easily.
Strength: High compressive strength improves overall roof system performance. Ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Enhanced mold resistant core and coated fiberglass facers provide mold and mildew resistance per ASTM-D 3273.
Meets the requirements of ASTM C 1177
Very Severe Hail: JM DEXcell FA VSH Glass Mat Roof Board meets FM 'VSH' with fully adhered JM 80 mil (smooth back) TPO membrane and standard JM TPO membrane adhesives, 4'x4' DEXcell FA VSH boards adhered in JM Roofing System Urethane Adhesive (RSUA) ribbons, 12" OC min. JM TPO FB 115 or FB 135 membranes can be adhered with JM Two-Part UIA in a splatter application, DEXcell FA VSH may be mechanically fastened or adhered with JM RSUA in ribbons, 12" OC min.
Handleability: Heavy duty coated fiberglass facer ideal for fully adhered systems improves handling and strength. Scores and snaps easily.
Strength: High compressive strength improves overall roof system performance. Ideal for systems where wind uplift and puncture resistance are a concern.
Fire Performance: FM Class 1 for fire barrier requirements and UL Class A unlimited slope with excellent surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Enhanced mold resistant core and coated fiberglass facers provide mold and mildew resistance per ASTM-D 3273.
Meets the requirements of ASTM C 728, Type 2
Polymerized Asphalt Emulsion Coating: Allows for direct application of SBS or APP membranes using torch application techniques, and does not require pre-heating like heavily coated boards. This allows for fuel savings and labor efficiency by eliminating fasteners with a mechanically fastened base sheet.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and fire resistance.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
High Density: Provides additional strength and durability.
Meets the following requirements:
ENRGY 3 / Tapered ENRGY 3
• CAN/ULC S704, Type 2, Class 3 (140 kPa)
• ASTM C 1289, Type II, Class 1, Grade 2 ENRGY 3 25 PSI / Tapered
ENRGY 3 25 PSI
• CAN/ULC S704, Type 3, Class 3 (170 kPa)
• ASTM C 1289, Type II, Class 1, Grade 3
Glass-Reinforced Facers: Provides rigidity and resistance to indentation and crushing, and are compatible with BUR, modified bitumen and single ply membrane systems.
Closed Cell Polyisocyanurate Foam Core: Provides high R-value per inch in built-up, modified bitumen, metal roof and single ply roof systems, and utilizes a zero ozone depletion blowing agent that provides high thermal insulation performance.
Meets the following requirements:
ENRGY 3 CGF / Tapered ENRGY 3 CGF
• CAN/ULC S704, Type 2, Class 3 (140 kPa)
• ASTM C 1289, Type II, Class 2, Grade 2
ENRGY 3 25 PSI CGF / Tapered ENRGY 3 25 PSI CGF
• CAN/ULC S704, Type 3, Class 3 (170 kPa)
• ASTM C 1289, Type II, Class 2, Grade 3
Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in fully adhered single ply systems.
Closed Cell Polyisocyanurate Foam Core: Provides high R-value per inch in built-up, modified bitumen, metal roof and single ply roof systems, and utilizes an environmentally compliant blowing agent that provides high thermal insulation performance.
Expanded Perlite: Provides good dimensional stability and excellent insulation value with stable R-value. The high perlite content offers far greater fire resistance than conventional wood fiber materials.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL® Environment to certify the recycled content and contributes to the LEED® Materials and Resource (MR) credit 4.
FesCant Plus Cant Strips: Manufactured from JM Cant Board, a high-density, laminated perlite board that provides excellent transition from the deck to the wall of the roof.
Tapered FESCO Edge Strips: Excellent for transitioning from membrane to nailer, or transitioning from Tapered FESCO®, Tapered ENRGY 3®, or Tapered Fesco Foam® panels to the roof level to help promote positive drainage.
Meets the requirements of ASTM C 728, Type 1
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive asphalt absorption in hot-asphalt applied roofing systems.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and fire resistance.
Low Thermal Insulation Board: Composed of expanded perlite, reinforcing cellulosic fibers and selected binders.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL® Environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
Hot Asphalt Friendly: Protective cover board or low thermal insulation board proven to reduce the tendency for blistering in hot asphalt applications.
Meets the requirements of ASTM C 728, Type 2
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive asphalt absorption in hot-asphalt applied roofing systems.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and superior fire resistance.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and
Resource (MR) credit 4.
High Density*: Allows for installations directly over a wide flute or metal deck application for spans up to 2½" and resists damage from construction and maintenance.
Hot Asphalt Friendly: Can be used as a cover board in re-roofing and new construction, proven to reduce the tendency for blistering in hot asphalt applications.
*For direct to deck application, contact JM technical services for specific requirements and system compatibility
Meets the requirements of ASTM C 728, Type 2
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive asphalt absorption in hot-asphalt applied roofing systems.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and fire resistance.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
Hot Asphalt Friendly: Utility board for use as a divorcing layer in re-roofing and in new construction as a top layer in multi-layer insulation systems proven to reduce the tendency for blistering in hot asphalt applications.
Meets the requirements of ASTM C 728, Type 3
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive adhesive absorption in hot-asphalt and cold applied roofing systems, and to provide a strong surface for bonding bituminous membranes.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and superior fire resistance.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
High Density: Provides additional strength and durability over 1/2" Retro-Fit Board with low moisture content and water resistance compared to wood fiber board.
Meets the requirements of ASTM C 1325
Ideal for liquid applied membrane roof systems.
Strength: Engineered to provide superior wind-uplift performance for a wide variety of roof assemblies. The board is formed using an aggregated portland cement slurry with a polymer-coated, glass-fiber mesh completely encompassing edges and both surfaces, to enhance bond strength of membrane systems and gives excellent resistance to delamination.
Fire Performance: Provides excellent fire performance with unlimited slope classifications and is non-combustable per UL 790.
Moisture and Mold Resistance: Cement based, highly water durable board, scored a maximum "10" for mold resistance when tested per ASTM D 3273.
Meets the requirements of ASTM C 1278
Strength: Engineered to provide high wind-uplift performance. Uniform composition providing enhanced bond strength of membrane systems with no risk of facer delamination.
Fire Performance: Provides excellent fire performance, and demonstrates exceptional surface burning characteristics. 5/8" thickness meets the requirements of Type X per ASTM C 1177.
Moisture and Mold Resistance: Integral water-resistant core scored a maximum "10" for mold resistance when tested per ASTM D 3273.
Meets the requirements of ASTM C 728, Type 1
TopLoc® Coating: Top surface is sealed with this special coating to reduce excessive asphalt absorption in hot-asphalt applied roofing systems.
Expanded Perlite: Provides good dimensional stability, excellent insulation value with stable R-value and fire resistance.
Tapered Design: Factory cut taper, that is easy to install and cut, builds slope into an otherwise flat roofing system, allowing water to drain freely off the roof.
Reinforcing Cellulosic Fibers: Consists of recycled newsprint to provide strength to the board as well as high recycled content. JM utilizes third party certification by UL environment to certify the recycled content and contributes to the LEED Materials and Resource (MR) credit 4.
Hot Asphalt Friendly: Perlite board proven to reduce the tendency for blistering in hot asphalt applications.
Liquid Applied Roofing Systems
Use: 1-Part Permaflash is a unique, one-component, elastomeric, liquid applied flashing material, consisting of an asphalt/polyurethane resin. It is formulated for use with Johns Manville (JM) modbit membrane products.
Type: One-part, elastomeric, liquid-applied flashing material.
Color: Brown
Features: Cures to a durable, elastomeric film and forms exceptional bonds between the modified bitumen and a variety of penetrating materials. Single component solution with no mixing required that conforms easily to various geometries or irregular shapes. UV stable, high solids (80%), low odor.
Use: JM PMMA Primer All-Purpose serves as a primer for the JM PMMA system. Combined with JM PMMA Catalyst, it forms a flexible combination primer for membrane, cement board, concrete, masonry, wood, and other substrates (as recommended). JM PMMA Primer All-Purpose promotes adhesion and reduces staining on applications that contain residual or existing asphalt systems.
Type: Elastomeric, liquid-applied membrane primary layer.
Color: Translucent, Cloudy White
Features: Promotes adhesion on concrete, masonry, wood, asphalt and various surfaces. Suitable for ponding water areas. UV stable, high solids, VOC compliant.
Use: For use with JM BUR and SBS membrane products. JM PMMA Catalyst is a reactive agent used to initiate curing of JM PMMA liquid resins and primer.
Type: Catalyst for two-part, elastomeric, liquid-applied PMMA systems.
Color: White Powder
Use: JM PMMA Cleaner is used to clean and reactivate the transition area between existing, cured in-place JM PMMA membranes and primers and new tie-ins, repairs and staged coats of resin. This product may also be used as solvent for cleaning metal and plastic surfaces prior to resin application as well as tools and equipment used with the application of the JM PMMA system.
Type: Aromatic blended solvent
Color: Un-Pigmented
Features: Prepares fully cured and existing JM PMMA membrane and primers for a new application of fresh resin.
Use: For use with JM BUR, SBS and JM PMMA membrane systems. JM PMMA Detailer combined with JM PMMA Catalyst to form a rapid-curing, flexible polymethyl-methacrylate (PMMA) resin containing chopped fiber reinforcement. Used in areas where fabric reinforced flashings would be difficult to install. Do not install in areas where differential movement is expected.
Type: One part of a two-part, elastomeric, liquid-applied flashing material.
Color: Light Grey
Features: Can be used to flash or repair small areas that cannot be reinforced with fabric. UV stable, high solids, VOC compliant.
Use: JM PMMA Field Resin is part of a two-component, fastcuring, polymethyl-methacrylate (PMMA) system for roofing and waterproofing application. It is combined with JM PMMA Catalyst and JM PMMA Scrim to form a monolithic reinforced membrane.
Type: One part of a two-part, elastomeric, liquid-applied membrane.
Color: White or Grey
Features: Elastomeric and monolithic. Suitable for ponding water areas. UV stable, high solids, VOC compliant. Available in Summer and Winter Grade. May be combined with JM PMMA Thixo for use on vertical flashings.
Use: For use with JM BUR and SBS membrane products. It is combined with JM PMMA Catalyst and JM PMMA Scrim to form a monolithic, self-reinforced flashing membrane for penetrations and a variety of other details.
Type: One part of a two-part, elastomeric, liquid-applied flashing material.
Color: White or Grey
Features: Can be used to flash most penetrations, drains, and vertical surfaces. Resists virtually all factors affecting base flashing performance while providing superior flexibility and durability. UV stable, high solids, VOC compliant. Available in a Summer and Winter Grade.
Use: The JM PMMA Metal Primer Base and Activator products serve as a primer for a JM PMMA system. They promote adhesion for various metal substrates, including drain bowls and edge metal.
Type: 100% solids, low-odor epoxy
Color: Base - Black; Activator - Clear
Features: Used to prime metal and other substrates prior to the application of a JM PMMA system.
Use: For use with JM PMMA membrane systems. It is combined with JM PMMA Catalyst to form a rapidcuring, flexible resin for repairing substrates or covering insulation joints prior to installation of a JM PMMA system.
Type: An elastomeric liquid-applied paste.
Color: Pebble Grey
Features: Can be used to cover the joints in insulation boards to prepare them for application of a JM PMMA membrane system. Used for patching or repairs on a variety of substrates. UV stable, high solids, VOC compliant.
Use: JM PMMA Scrim is used in JM PMMA liquid-applied, reinforced membrane systems to improve tear strength, puncture resistance, and crack bridging capabilities. It is a non-woven, chopped strand fabric reinforcement.
Color: White
Use: For use with JM PMMA membrane systems in high traffic areas such as balconies or walkways. JM PMMA Textured Top Coat is combined with JM PMMA Color Pack and JM PMMA Catalyst to form a flexible resin with pre-mixed aggregate.
Type: Elastomeric, liquid-applied top coat.
Color: Not pigmented, Determined by JM PMMA Color Pack
Features:
Added slip resistance for high traffic areas.
UV stable, high solids, VOC compliant.
May be combined with JM PMMA Thixo for use on vertical flashings.
Use: For use with JM PMMA resin systems as a thixotropic additive. It may be mixed with JM PMMA Resin or JM PMMA Top Coats to prepare the mixture to be used in slopes greater than 1.5":12", including vertical applications.
Type: One part liquid thickening agent.
Features: Prepares JM PMMA Resin and Top Coats for use on vertical surfaces. Ideal when JM PMMA Top Coat is needed for vertical surfaces or for when the JM PMMA Resin - Flashing is unavailable or not practical for use.
Use: For use with JM PMMA membrane systems. JM PMMA Top Coat is combined with JM PMMA Color Pack and JM PMMA Catalyst to form a UV stabilized, resilient finish top coat. The top coat may be smooth or applied with broadcast aggregate.
Type: Elastomeric, liquid-applied top coat.
Color: Not pigmented, Determined by JM PMMA Color Pack
Use: For use with JM PMMA membrane systems. JM PMMA Top Coat is combined with JM PMMA Color Pack and JM PMMA Catalyst to form a UV stabilized, resilient finish top coat. The top coat may be smooth or applied with broadcast aggregate.
Type: Elastomeric, liquid-applied top coat.
Color: Not pigmented, Determined by JM PMMA Color Pack
Features: May be combined with JM PMMA Thixo for use on vertical flashings.
Use: To prime JM EPDM and TPO membrane surfaces for adhering EPDM or TPO peel and stick products.
Type: One-part, low VOC synthetic polymer-based membrane primer.
Color: Clear to Light Yellow
The PermaFlash System consists of PermaFlash Primer, MBR Flashing Cement, and PermaFlash Scrim. It is an integrated flashing system specifically formulated for use in bituminous systems.
Features: Can be used to flash most penetrations, drains, and vertical surfaces.
Resists virtually all factors affecting flashing performance while providing superior flexibility and durability.
High solids, low odor, VOC compliant, and UV stable.
PermaFlash Primer (Low VOC): One-Part Solvent-Based Primer that improves adhesion of MBR® Flashing Cement to nonporous substrates.
MBR Flashing Cement: Two-part, liquid-applied flashing material that cures to a durable, elastomeric film. (Please see the MBR Flashing Cement data sheet for more information.)
PermaFlash Scrim: Flexible stitchbonded polyester scrim.
Colors:
Primer - Clear
Liquid Base - Black
Activator - Brown
Scrim - White
Use: JM SP Liquid Flashing Scrim is a polyester based, non-woven reinforcement fabric used in the JM SP Liquid Flashing system. The soft, flexible fabric is designed for use around oddly shaped, difficult penetrations and tying together different roofing substrates.
Type: Polyester fabric, scrim reinforcement layer
Color: White
Features:
Improves tear strength and puncture resistance
Easily shaped to fit even the most difficult penetrations
Helps maintain membrane and application uniformity
Available in two widths to fit your flashing requirements
Use: JM SP Liquid Flashing TPO and PVC Primer is used to prime the JM TPO and PVC (KEE and SD Plus) single ply membranes as part of the JM SP Liquid Flashing system.
Type: Single component, solvent based membrane primer
Color: Light yellow
Features:
Excellent adhesion to JM TPO and JM PVC single ply membranes.
Quick curing to speed up application time.
Single component for east 1-step application. No mixing needed, just pour and spread.
Use: JM SP Liquid Flashing Concrete Primer is used to prime properly prepared and abraded concrete and masonry substrates that comes into contact with JM single ply membranes as part of the JM SP Liquid Flashing System.
Type: 2-component, epoxy based, cold applied liquid primer
Color: Clear Part A and Yellow Part B
Features:
Excellent adhesion to a wide variety of masonry substrates
Solvent Free and Low VOC
Quick curing to support faster application times Pre-portioned and easy to use
Use: JM SP Liquid Flashing Metal and Wood Primer is used to prime properly prepared and acceptable metal and wood substrates that comes into contact with JM single ply membranes as part of the JM SP Liquid Flashing system.
Type: 2-component, polyurethane based, cold applied liquid primer
Color: Tan Part A and Brown Part B
Features:
Excellent adhesion to a wide variety of metal substrates
Approved on plywood (standard and marine grade), OSB, and wood plank
Solvent Free and Low VOC
Quick curing to support faster application times
Pre-portioned and easy to use
Use: JM SP Liquid Flashing Resin, when combined with primers and scrim, creates a cold applied, reinforced liquid flashing compatible with all JM single ply membranes: TPO, PVC, & EPDM. The monolithic, self-terminating flashing membrane is ideal for tying together different roofing substrates and odd, or difficult shaped penetrations.
Type: A two-component, polyurethane based, cold applied, liquid flashing
Color: Highly reflective white
Features:
Can be used to bind multiple substrates including metal, wood, concrete and masonry
Mostly odorless, low VOC, and solvent free
Pre-portioned and easy to use
UV and color stable
Specialty Roofing Products
Expand-O-Flash expansion joint covers are flexible, weather-proof
exterior covers for expansion joint openings and are an effective, flexible
closure for a wide variety of standard and special applications.
Bellows: Widths: 4" - 12" (10.16 cm - 30.48 cm) Standard
(Other sizes are available, contact JM for more information.)
Membrane Cover
JM PVC
Thicknesses: 0.060" (1.52 mm)
Width: 8" up to 75" (20.32 cm up to 1.91 m) (Depending on flashing and welding to the membrane requirements.)
Colors: White; Grey; Grey ES; Sandstone and Sandstone ES
Closed Cell Support Foam
Thickness varies from 0.375" to 0.75" (9.53 mm to 19.1 mm) depending on bellows width.
Nail Strip: Rigid PVC
Width: 1.375" (3.49 cm)
Factory fabricated transitions are available.
Expand-O-Flash expansion joint covers are flexible, weather-proof
exterior covers for expansion joint openings and are an effective, flexible
closure for a wide variety of standard and special applications.
Use
Designed to manage the movement of commercial and industrial
building roof systems: thermal, settlement, new and existing junctions,
differing roof deck materials or direction and seismic movement.
Compatible with TPO roof membranes.
Advantages
• Accommodates multidirectional movement
• Non-reinforced bellows for both geometric and elastomeric movement
• Designed in a variety of styles for application requirements
• Labor saving factory crafted intersections to fit most needs
or custom designed for special needs
Features and Components: Expand-O-Flash expansion joint covers are flexible, weather-proof exterior covers for expansion joint openings and are an effective, flexible closure for a wide variety of standard and special applications. Each Expand-O-Flash cover is a combination of a flexible rubber membrane, supported by a closed cell foam to form flexible bellows, with two metal flanges, adhesively and mechanically combined to the bellows by a patented bifurcation process. As expansion joints move, the greatest stress occurs in the cover at the point where expansion joints intersect, cross or change directions. Factory-fabricated intersections are designed for maximum flexibility and are produced using special fabrication techniques to ensure watertight, clean seam lines. Close factory tolerance and quality control assures high yield performance.
Use: Designed to manage the movement of commercial and industrial building roof systems: thermal, settlement, new and existing junctions, differing roof deck materials or direction and seismic movement. Compatible with all roof membranes.
Advantages:
Accommodates multidirectional movement
Non-reinforced bellows for both geometric and elastomeric movement
Designed in a variety of styles for application requirements
Labor saving factory crafted intersections to fit most needs or custom designed for special needs
Features and Components: Expand-O-Flash expansion joint covers are flexible, weather-proof exterior covers for expansion joint openings and are an effective, flexible closure for a wide variety of standard and special applications. Each Expand-O-Flash cover is a combination of a flexible rubber membrane, supported by a closed cell foam to form flexible bellows, with two metal flanges, adhesively and mechanically combined to the bellows by a patented bifurcation process. As expansion joints move, the greatest stress occurs in the cover at the point where expansion joints intersect, cross or change directions. Factory-fabricated intersections are designed for maximum flexibility and are produced using special fabrication techniques to ensure watertight, clean seam lines. Close factory tolerance and quality control assures high yield performance.
Use: Designed to manage the movement of commercial and industrial building roof systems: thermal, settlement, new and existing junctions, differing roof deck materials or direction and seismic movement. Compatible with all roof membranes.
Advantages:
Accommodates multidirectional movement
Non-reinforced bellows for both geometric and elastomeric movement
Designed in a variety of styles for application requirements
Labor saving factory crafted intersections to fit most needs or custom designed for special needs
Features and Components: Expand-O-Flash expansion joint covers are flexible, weather-proof exterior covers for expansion joint openings and are an effective, flexible closure for a wide variety of standard and special applications. Each Expand-O-Flash cover is a combination of a flexible rubber membrane, supported by a closed cell foam to form flexible bellows, with two metal flanges, adhesively and mechanically combined to the bellows by a patented bifurcation process. As expansion joints move, the greatest stress occurs in the cover at the point where expansion joints intersect, cross or change directions. Factory-fabricated intersections are designed for maximum flexibility and are produced using special fabrication techniques to ensure watertight, clean seam lines. Close factory tolerance and quality control assures high yield performance.
Use: Designed to manage the movement of commercial and industrial building roof systems: thermal, settlement, new and existing junctions, differing roof deck materials or direction and seismic movement. Compatible with all roof membranes.
Advantages:
Accommodates multidirectional movement
Non-reinforced bellows for both geometric and elastomeric movement
Designed in a variety of styles for application requirements
Labor saving factory crafted intersections to fit most needs or custom designed for special needs
Features and Components: Expand-O-Flash expansion joint covers are flexible, weather-proof exterior covers for expansion joint openings and are an effective, flexible closure for a wide variety of standard and special applications. Each Expand-O-Flash cover is a combination of a flexible rubber membrane, supported by a closed cell foam to form flexible bellows, with two metal flanges, adhesively and mechanically combined to the bellows by a patented bifurcation process. As expansion joints move, the greatest stress occurs in the cover at the point where expansion joints intersect, cross or change directions. Factory-fabricated intersections are designed for maximum flexibility and are produced using special fabrication techniques to ensure watertight, clean seam lines. Close factory tolerance and quality control assures high yield performance.
Use: Designed to manage the movement of commercial and industrial building roof systems: thermal, settlement, new and existing junctions, differing roof deck materials or direction and seismic movement. Compatible with all roof membranes.
Advantages:
Accommodates multidirectional movement
Non-reinforced bellows for both geometric and elastomeric movement
Designed in a variety of styles for application requirements
Labor saving factory crafted intersections to fit most needs or custom designed for special needs
Use:
Designed to manage the movement of commercial and industrial building roof systems: thermal, settlement, new and existing junctions, differing roof deck materials or direction and seismic movement. Compatible with all roof membranes.
Advantages:
Accommodates multidirectional movement
Non-reinforced bellows for both geometric and elastomeric movement
Designed in a variety of styles for application requirements
Labor saving factory crafted intersections to fit most needs or custom designed for special needs
Use:
Designed to manage the movement of commercial and industrial building roof systems: thermal, settlement, new and existing junctions, differing roof deck materials or direction and seismic movement. Compatible with all roof membranes.
Advantages:
Accommodates multidirectional movement
Non-reinforced bellows for both geometric and elastomeric movement
Designed in a variety of styles for application requirements
Labor saving factory crafted intersections to fit most needs or custom designed for special needs
Designed for use in single ply TPO roof systems to replace existing drains in re-roofing applications. The one-piece spun aluminum body has a TPO-coated flange for direct hot air welding of TPO roof membranes. The drain flange has a depressed sump area for improved flow and to facilitate drainage.
One-piece Seamless Body: 0.125" (3 mm) spun aluminum with 12" (30.48 cm) drain stem length, and an extra large 17.5" (44.45 cm) diameter TPO-coated flange, compatible with most TPO membranes.
Strainer Dome: 7" (17.78 cm) tall cast aluminum strainer dome that is easy to remove for cleaning.
U-Flow® Mechanical Seal*: Provides a watertight connection to PVC and cast iron pipes.
* Watertight U-Flow® Mechanical Seal requires U-Flow screwdriver, sold separately
Designed to replace existing drains in all roofing systems. The one piece spun aluminum body and heavy-duty cast aluminum dome and clamping ring provide strength and durability. The drain flange has a depressed sump area for improved flow and to facilitate water drainage from roof surface.
One-piece Seamless Body: 0.125" (3 mm) spun aluminum with 12" (30.48 cm) drain stem length, and an extra large 17.5" (44.45 cm) diameter flange that allows positive attachment of roof flashing membrane.
Strainer Dome: Available in two options: 7" (17.78 cm) tall cast aluminum (pictured), or 5.5" (13.97 cm) tall cast aluminum SuperDome with screw down lid, to secure against vandals.
Clamping Ring: The heavy-duty cast-aluminum clamping ring ensures a uniform compression seal of the membrane for strength and durability.
U-Flow® Mechanical Seal*: Provides a watertight connection to PVC and cast iron pipes.
* Watertight U-Flow® Mechanical Seal requires U-Flow screwdriver, sold separately. Hercules® RetroDrain® and U-Flow® are registered trademarks of OMG Roofing Products.
The OverFlow assembly provides additional water drainage, if necessary, when water level on the roof exceeds 4" (10.16 cm) in height. It is a spun aluminum round drain attachment that is designed to be used with all RetroDrains that are supplied with a clamping ring assembly. Simple and easy to install. The FlowControl assembly provides a specific limited water flow rate under different water pressures (water head) on the roof, and performs as an overflow drain if the water level on the roof exceeds 4" (10.16 cm) in height. It is a spun aluminum round drain attachment with two specially designed weirs, and is compatible with RetroDrains that are supplied with a clamping ring assembly.
Material: Each is a one-piece, 0.050" (1.27 mm) spun aluminum attachment, 4" (10.16 cm) in height.
* OverFlow®, FlowControl®, and RetroDrain® are registered trademarks of OMG Roofing Products
A cost-effective snap-on coping system designed for use with single ply, built-up and modified bitumen roofing systems. The system consists of galvanized steel anchor clips and aluminum or galvanized coping covers in a variety of thicknesses and colors.
Anchor Clips: 12" wide Galvanized steel base with stainless steel spring clip designed to keep upward pressure on the coping cover. Pre-punched for proper fastener location.
Coping Cover: Available in 12 ft (3.7 m) lengths of either aluminum or galvanized steel, lengths and gauges listed below.
Concealed Splice Plate: 8" (20.3 cm) wide plate, with metal and finish to match cover, and dual non-curing isocryl butyl sealant strips to allow for thermal movement and seals joints.
Finishes: Steel and aluminum available in a number of standard Kynar®* 500 colors, aluminum also available in mill and anodized finishes. Custom colors available upon request.
Accessories: Factory-fabricated miters, end caps, and tees are available with “quicklock" or welded seams.
Custom Capabilities: Quicklock and welded radius coping available along with other specially fabricated coping products to meet the needs of the project.
*Kynar® is a registered trademark of Arkema, Inc.
Edge One Fascia system offers convenience and economical pricing to simplify projects and maximize profits. Our Edge One Fascia for single-ply roofs helps to protect the roof system against high wind events, saving the building from costly damage. The design eliminates the stripping in typical of other products, making Edge One Fascia fast and easy to install.
Anchor Cleat: 12' (3.7 m) lengths, 20 gauge (1.00 mm) formed galvanized steel, preslotted 12" (30.48 cm) o.c. with 6" (15.24 cm) wide stainless steel spring clips at 48" (1.22m) o.c.
Fasteners: Stainless Steel #10 x 2" (5.08 cm) fasteners with hexagonal head and driver bit are furnished. Masonry fasteners available upon request.
Fascia Cover: Snap-On covers in 12' (3.7 m) lengths, available in 24 ga. (0.6 mm) steel and 0.040" (1.02 mm) aluminum, other metals available upon request. Factory “notched" to provide a 1" (2.54 cm) lap joint.
Finishes: Steel and aluminum available in a number of standard Kynar®* 500 colors, aluminum also available in mill and anodized finishes. Custom colors available upon request.
Accessories: Factory-fabricated corners, overflow and spillout scuppers, downspout sumps, radius and special angles, extenders and soffit clip systems are also available.
*Kynar® is a registered trademark of Arkema, Inc.
A high performance edge treatment for all modified bitumen and BUR roof projects. Nonpenetrating design allows for vertical face attachment without penetrating the horizontal flange, and eliminates the need to strip-in the deck flange, eliminating potential delamination between the asphalt and metal deck flange due to thermal expansion and contraction forces. Provides maximum protection against wind uplift damage.
Anchor Bars: 12' (3.7 m) lengths, extruded 6063-T6 alloy aluminum, preslotted 12" (30.48 cm) o.c.
Fasteners: Stainless Steel #9 x 2" (5.08 cm) fasteners with hexagonal head and driver bit are furnished. Masonry fasteners available upon request.
Fascia Cover: Snap-On covers in 12' (3.7 m) lengths, available in 24 ga. (0.6 mm) steel and 0.040" (1.02 mm) aluminum, other metals available upon request. Factory “notched" to provide a 1" (2.54 cm) lap joint.
Anchor Bar Splice Plates: Provided compression gasket allows for thermal movement of the fascia systems.
Finishes: Steel and aluminum available in a number of standard Kynar®* 500 colors, aluminum also available in mill and anodized finishes. Custom colors available upon request.
Accessories: Factory-welded anchor corners, overflow and spillout scuppers, downspout sumps, radius and special angles, extenders and soffit clip systems are also available.
*Kynar® is a registered trademark of Arkema, Inc.
A high performance edge treatment for fully adhered or mechanically fastened single ply roof projects. Nonpenetrating design allows for vertical face attachment without penetrating the horizontal flange, and eliminates the need to strip-in the deck flange, eliminating potential delamination between the adhesive and metal deck flange due to thermal expansion and contraction forces. Provides maximum protection against wind uplift damage.
Anchor Bars: 12' (3.7 m) lengths, extruded 6063-T6 alloy aluminum, preslotted 12" (30.48 cm) o.c.
Fasteners: Stainless Steel #9 x 2" (5.08 cm) fasteners with hexagonal head and driver bit are furnished. Masonry fasteners available upon request.
Fascia Cover: Snap-On covers in 12' (3.7 m) lengths, available in 24 ga. (0.6 mm) steel and 0.040" (1.02 mm) aluminum, other metals available upon request. Factory “notched" to provide a 1" (2.54 cm) lap joint.
Anchor Bar Splice Plates: Provided compression gasket allows for thermal movement of the fascia systems.
Finishes: Steel and aluminum available in a number of standard Kynar®* 500 colors, aluminum also available in mill and anodized finishes. Custom colors available upon request.
Accessories: Factory-welded anchor corners, overflow and spillout scuppers, downspout sumps, radius and special angles, extenders and soffit clip systems are also available.
*Kynar® is a registered trademark of Arkema, Inc.
Presto-Weld drip edge is a factory-fabricated coated metal edge system used to terminate at the perimeter of a PVC or TPO membrane. This edge comes with a factory applied, 8" wide PVC flashing strip or 6" wide TPO flashing strip of Johns Manville membrane to help save labor installation costs in the field. Presto-Weld is an economical solution for many conditions such as continuous edge drainage with or without a gutter condition.
Anchor Cleat: 12' (3.7 m) lengths, 22 gauge (0.79 mm) formed galvanized steel, preslotted fastener holes at 12" (30.48 cm) o.c.
Fasteners: 1 ¼" (32 mm) ring shank roofing nails, provided.
Fascia Cover: 12' (3.7 m) lengths, available in 24 ga. (0.6 mm) steel PVC or TPO coated with pre-slotted fastener holes at 6" o.c.
Finishes: Standard membrane colors available.
Accessories: Factory-fabricated corners, and special angles and extenders are also available.
Face Height 3" (76.2 mm), 4" (102 mm), 6" (152 mm)
Designed for use in single ply PVC roof systems to replace existing drains in re-roofing applications. This one-piece, spun aluminum body has a plastisol-coated flange for direct hot-air welding of PVC roof membranes. The drain flange has a depressed sump area to facilitate the easy drainage of all water from the roof surface.
One-piece Seamless Body: 0.064" (1.6 mm) spun aluminum body with 12" (30.48 cm) drain stem length, and an extra large 17.5" (44.45 cm) diameter plastisol-coated flange for direct hot-air welding of PVC roof membranes.
Strainer Dome: 7" (17.78 cm) tall, heavy-duty cast aluminum strainer dome is easy to remove for cleaning.
U-Flow® Mechanical Seal*: Provides a watertight connection to PVC and cast iron pipes.
* Watertight U-Flow® Mechanical Seal requires U-Flow screwdriver, sold separately. AlumaWeld® RetroDrain® and U-Flow® are registered trademarks of OMG Roofing Products.
The U-Flow®* Screwdriver is an accessory product used in the installation of RetroDrain®* products with the U-Flow Seal. Specifically for tightening the special recessed head screws on the U-Flow compression seals. The extra long shaft of the screwdriver ensures ease of reach when tightening the connection screws on all U-Flow retrofit products. The screwdriver comes complete with a loss prevention bar.
Tip: #2 Robertson square tip
Shaft: 12.5" (31.75 cm) shaft length
* RetroDrain® and U-Flow® are registered trademarks of OMG Roofing Products.
Expand-O-Gard expansion joints are flexible waterproof closures for vertical building walls designed to accommodate movement between building components caused by thermal, settlement, wind, flex and seismic forces.
Bellows:
Widths: 4" - 12" (10.16 cm - 30.48 cm) Standard
(Special sizes are available up to 54" (1.37 m) wide)
Membrane Covers
EPDM (Style WS)
Thickness: 0.060" (1.52 mm)
Colors: Black or White - premium priced and available upon request.
EPDM (Style F)
Thickness: 0.060" (1.52 mm)
Color: Black - premium priced and available upon request.
Closed Cell Support Foam
Thickness varies from 0.375" - 0.75" (9.53 mm to 19.1 mm) depending on bellows width.
Flange1 :Aluminum2 : .032" (0.81 mm)
Copper: 16 oz. (0.56 mm)
Galvanized Steel2 : 26 ga. (0.56 mm)
Stainless Steel: .018" (0.46 mm) folded to .036" (0.91 mm)
1. Other metals are available upon request.
2. Available in Kynar® finish colored upon request. Kynar® is a registered trademark of Arkema, Inc.
Styles:WS = For masonry construction, metal buildings and panel wall systems where flanges are concealed and/or sandwiched within the wall system.
F = For joints between new and existing vertical walls, between curtain walls and glass atriums, and other vertical building walls where the flange is part of the closure design. Factory fabricated transitions are available.
Roofing Coatings
Meets the requirements of: ASTM D 1227, Type II, Class 1 (Asbestos Free);
ASTM 1187, Type I; SS-R-1781, MIL-R-3472A
Use: Protective coating over built-up, SBS and APP modified bitumen roofs, and approved substrates.
Type: One-part, asphalt-based, clay emulsion roof coating.
Substrates: Metal, corrugated, concrete and wood.
Color: Black
Features: Water based, low VOC, and UV resistant. Mineral-fiber reinforced. Breathable; allows water vapor to escape.
Meets the requirements of ASTM D 2824, Type III (Asbestos Free)
Use: Used as a protective, reflective coating over built-up, SBS and APP modified bitumen roofs and approved substrates.
Type: One-part, aluminum pigmented roof coating. Substrates: Metal, corrugated, and tin.
Color: Black (dries to a reflective silver color)
Features: Pure aluminum pigment flakes. Highly reflective. Fiber reinforced. Durable.
Exceeds the requirements of ASTM D 6083
Use: JM Coating Acrylic is designed for use as a reflective top coat either over built-up, modified bitumen, or mechanically attached or adhered aged TPO or PVC membranes.
Type: One-part acrylic elastomeric roof coating.
Colors: White
Features:
100% acrylic durability.
Energy savings.
Prolonged roof life.
Reduced life cycle costs.
Meets the requirements of ASTM D 6083
Use: JM Coating Acrylic CR is a premium elastometric coating designed for use as a reflective top coat either over built-up, modified bitumen, or mechanically attached or adhered aged TPO or PVC membranes.
Type: One-part acrylic elastomeric roof coating.
Color: White
Features:
100% acrylic durability.
Maximized energy savings.
Prolonged roof life.
Reduced life cycle costs.
Available Documents
Meets the requirements of ASTM D 1475, ASTM D 2196 and ASTM D 2939
Use: JM Coating Acrylic Flashing is a brush/trowel grade acrylic patch designed for use with JM Coating Acrylic systems.
Type: One-part acrylic elastomeric roof flashing and mastic.
Color: White
Features:
Prolonged roof life.
Reduced life cycle costs.
Component of a "complete" coating system.
Use: JM Coating Field Polyester Reinforcing Fabric is a firm stitch-bond polyester used in JM Coatings systems.
Type: Polyester Reinforced
Color: White
Features: Used for roof restoration with asphalt, solvent-based, and elastomeric systems. systems. The firm fabric provides easier handling with limited wrinkling.
Use: JM Coating Polyester Reinforcing Fabric is a stitch-bonded polyester used in JM Coatings liquid-applied systems. The soft, flexible fabric is designed for use around penetrations, or roof mounted equipment, curbs and seams, to improve tear strength, puncture resistance, and crack bridging capabilities. It is a non-woven, fabric reinforcement.
Color: White
Features: Improve tear strength, puncture resistance, and crack bridging capabilities.
Use: JM Coating Repair Tape is used to seal seams, flashings and repair areas of existing roof prior to application of JM Coating Membrane systems.
Materials: A high-strength sealing tape with a polyester stitch-bonded fleece top surface.
Colors: White fleece top
Meets the requirements of ASTM D 6694
Use: JM Coating Silicone is designed for use over a variety of substrates, including built-up, modified bitumen, and aged mechanically attached or adhered TPO and EPDM membranes.
Type: One-part, high-solids.
Color: White
Features:
Silicone durability and performance.
Energy savings.
Prolonged roof life.
Cool roof solution.
Use: Designed for use over a variety of substrates, JM Coating Silicone Flashing is a mastic used for repair applications with a reinforcing fabric, or to seal common flashing conditions when using JM Coating Silicone.
Type: High-solids fluid applied silicone flashing system.
Color: White
Features:
Silicone durability and performance.
High temperature resistance.
Prolonged roof life.
Highly flexible.
Meets the requirements of ASTM D 6694
Use: JM Coating Single Ply Primer is an adhesion promoter for use on aged single ply surfaces prior to application of the JM Acrylic or Silicone Coatings.
Type: One part solvent based primer
Color: Blue
Features:
Solvent based.
Quick dry formulation.
Use: JM Coating Universal Base is a high-performance, waterborne epoxy formulated for use with JM Coatings. This product is used as a base coat to create a smooth, fullyadhered substrate and helps to prevent bleed through over asphalt substrates. Use of JM Coating Universal Base improves long-term performance and durability.
Type: One-part acrylic elastomeric base coating.
Color: Blue
Features:
Can be used within 48 hours of roof membrane installation.
Prevents asphalt bleed through.
Use: Asphalt bleed-out coverage or aesthetic touch ups on modified bitumen and built-up cool roof coated cap sheets.
Type: One-part, acrylic elastomeric seam coating.
Color: White
Features:
Asphalt bleed blocking.
Improved aesthetic appearance.
Energy savings.
Prolonged roof life.
Reduced life cycle costs.
Use: As a reflective top coat over a variety of substrates, including smooth or mineral surfaced asphalt-based systems, single ply and metal roofing.
Type: One-part acrylic elastomeric roof coating.
Colors: White, Tan
Features:
Asphalt bleed blocking.
100% acrylic durability.
Energy savings.
Prolonged roof life.
Reduced life cycle costs.
Meets the requirements of ASTM D 6083
Use: As a reflective top coat over a variety of substrates, including smooth or mineral surfaced asphalt-based systems, single ply and metal roofs.
Type: One-part acrylic elastomeric roof coating.
Color: White, Tan
Features:
100% acrylic durability.
Energy savings.
Prolonged roof life.
Reduced life cycle costs.
Ideal for all climates, especially cold climates where temperatures may drop below 0F.
Use: TopGard Base Coat is used over a variety of substrates, including smooth and mineral surfaced asphalt-based roofing systems and single ply. It provides outstanding bleed-blocking over hot asphalt, asphalt emulsion systems, and both modified and built-up roofing systems. TopGard Base Coat must be used as a base coat in concert with TopGard 4000 or TopGard 5000.
Type: One-part acrylic elastomeric base coating.
Color: Buff
Features:
Can be used within 24 hours of roof membrane installation.
Prolonged roof life
Reduced life cycle costs.
Renewable.
JM Commercial Roofing Blog
Podcast episode 44 features Johns Manville's Technical Sales duo, Rick Gustin and Rob Hughes. Rick and Rob discuss their wind convergence presentation at IIBEC's International Convention and Trade Show in Phoenix.
For more than 160 years, people have been at the core of everything Johns Manville does. Recently that commitment took center stage in Georgia, where JM joined forces with the National Roofing Contractors Association to help foster the talents and passions of the next generation of skilled workers.
JM and NRCA teamed up at SkillsUSA's National Leadership & Skills Conference. Held annually in June in Atlanta, NLSC is a week-long celebration of the skilled trades and the accomplishments of career-ready leaders from across the United States, according to SkillsUSA.
The event each year draws more than 16,000 attendees, including students, instructors, industry partners and government officials. The highlight of the gathering is the NLSC, featuring more than 6,000 state champions competing for national gold, silver and bronze medals in 115 competitions.
Limited roof access didn't stand in the way of finding an affordable reroof for The Lighthouse of Houston, a nonprofit that has been serving those with limited vision for more than 80 years. Key to that was a long-standing relationship with Peak Roofing Inc., which worked with the nonprofit to create a cost-effective, 20-year roofing solution that did not alter the aesthetics of the building or disrupt the good work being done inside.
Also key was JM innovation — specifically its new ENRGY 3® HD cover board, which provides greater R value than a gypsum cover board but is lighter, and easier to manage and maneuver in tight spaces.
In addition to ENRGY 3® HD, the recover roof assembly includes 60 mil JM PVC SD Plus membrane.
JM team members got hands-on last month to help girls build construction skills and help the industry build a pipeline of future professionals at Let's Build Construction Camp for Girls Phoenix.
The camp — June 10-14 at Carpenters Local Union 1912 in Phoenix, Arizona — was founded to “ignite the spark within girls to explore the built environment through architecture, engineering, construction and building materials manufacturing-related careers." Started in 2016 by Kirsten Fallon, Jon Lattin, and Janet Grazul, Let's Build “takes a proactive approach to addressing workforce shortages and increasing women participation in the AECM industry by introducing young girls to the opportunities available to them."
A team charged with tackling a reroofing project at the Port of San Diego recently proved worth its salt, even as it dealt with the challenges posed by salt air and high-end cargo.
Chambers, Inc., dba Roof Construction, won the job to reroof National City Maritime Terminal Warehouse 24-B using a Johns Manville TPO system as the basis for design. And JM stepped in to help Sillman Architecture design a system that would meet the job's performance requirements, which included being able to withstand the high-moisture saltwater environment.
Other challenges included being careful not to let any debris fall onto the property, which is the site of a constantly rotating inventory of high-end vehicles.
The Contemporary Art Museum in St. Louisturned to a team of experts who designed and installed a reroofing project that delivered artful results on a tight timetable.
Known locally as CAM St. Louis, the museum is part of the city's popular Grand Center Arts District. Its 500,000 annual visitors are just shy of double the city's year-round population. Exhibits rotate annually from an off-site collection of more than 36,000 objects and display around 2,700 pieces. In 2021, the roof protecting these precious objects started to fail.
The design and implementation for reroofing the two-story, 16,135-square-foot museum posed challenges, including retaining aesthetic features while improving detailing, the addition of permanent rooftop safety equipment, and performing all work within a scheduled two-month shutdown of the museum.
Thanks to our distribution partners, the versatility and reliability of JM's Mod Bit roofing systems took center stage this month in Florida. Teaming with SPEC Building Materials and Beacon Building Products, JM hosted a Modified Bitumen Roofing Day 2024 in both Orlando and Medley.The two one-day events featured technical savvy mixed with food and a dash of fun. Attendees learned application techniques from JM technical experts for a variety of Mod Bit roofing system components including APPEX®, DynaGrip®, DynaWeld® and PermaFlash®.They watched and participated in live demos, dined on local food truck fare, networked with their industry peers and vied for a chance to win raffles for Patriot Coolers.