OMER's VEGA lifts combine peak performance and safety through its unique and proven design to optimize worker productivity. OMER's VEGA lifts are parallelogram style lifts that provide quick and safe access while providing the lift capacity for a wide range of heavy-duty commercial vehicles. OMER's VEGA lifts can be installed as surface-mounted or full flush mount. OMER's parallelogram lifts are engineered with lifting capacities from 50,000 lbs. (24T) to 120,000 lbs. (52T).
Capacities: 50,000 lbs. to 120,000 lbs.
Length: 26 ft. to 50 ft.
Collapsed Height: from 12 in.
Raised Heights: 73 in. or 77 in.
Platform widths: 30" or 32"
Lift versions:
CB Torsion Bar and Continuous Base
Open Floor Design
NTB with no Torsion Bar and Electronic Synchronization
OMER's Bipark is a unique patented dependent 2-car stacker that can lift a car smoothly and quickly into position. Its sleek design allows vehicles to be parked in a relatively small space. The platform has different capacities and dimensions to be able to accommodate SUV's, 4-wheel-drive vehicles, and even low-clearance sports cars. Moreover, the galvanized platform structure is designed in such a way as to prevent fluids from the upper vehicle from dripping down on the lower one. Also suitable for outdoor installations, due to its small footprint and heavy-duty engineering; Bipark environments vary from private to residential garages and to valet-operated parking lots.
Loading Capacities: 5,700 lbs. to 7,000 lbs.
Dimensions: standard 86.6" wide x 142.5" tall to 94.5" wide x 142.5" tall
Max wheelbase up to 124''
Hot-Dip-Galvanized hardware for outstanding outdoor installation.
OMER's Tripark is a unique patented compact dependent 3- car stacker that allows to park 3 cars in an extremely limited space. Its sleek design allows vehicles to be parked in a relatively small space. It is also equipped with a galvanized platform structure that is specifically designed to prevent water or fluids from the vehicles on the upper platforms from dripping down onto the vehicles below. Also suitable for outdoor installations, due to its small footprint and heavy-duty engineering, Tripark environments vary from private to residential garages, to car clubs, car warehouses, car dealerships, and to valet-operated parking lots.
Loading Capacity: 5,500 lbs. per platform
Lower Platform Dimensions: 85.6 ‘' x 153.5 Upper Platform Dimensions: 81.5'' x 142.5''
Max wheelbase up to 124''.
OMER is the #1 solution in elevation! OMER provides innovative, safe, and robust designs for light-duty vehicle lifts, heavy-duty vehicle lifts, and parking systems. Our ALI Certified product portfolio includes one of the largest varieties of HD platform lifts, alignment racks, and scissor-style specialty lifts available in the North American market.
OMER also specializes in parking systems and car elevators while boasting an expansive catalogue. From simple car-park stackers to more complex and automated parking systems, our highly customizable and reliable parking portfolio is perfect for any project or automotive enthusiasts' garage.
Heavy-Duty Lifts
OMER's state-of-the-art MCO MOBILE COLUMN lifts allow you to safely and efficiently lift any vehicle, anywhere. These portable vehicle lifts are uniquely designed to facilitate mobility and ease-of-use in restricted work areas. The lifts modular design includes a spring-loaded or hydraulic assisted steering handles to provide greater maneuverability. The MCO MOBILE COLUMNS are offered in both battery/wireless and battery/cabled designs and can be operated to be used as a single unit, in pairs or as sets of up to 10 units.
Capacity: 19,000 lbs.
Tire Sizes: 6 in. to 53.1 in.
Lift Cycles Per Charge: 25
Raised Height: 69 in.
OMER's unique pantograph heavy-duty KAR Lifts are available in ten models and are suitable for lifting the widest range of commercial vehicles. OMER's KAR line is designed with innovation in mind being the only vertical rise and sensor-less heavy duty lift available in the market. OMER's KAR Lifts are available in surface, recessed floor or flush-mounted installations. Their design also has different patents, including a patent for the ASO energy-absorbing system that helps to eliminate most of the mechanical stress on the lift structure and provides one of the longest life cycles available in the industry. In addition, the OMER's family of KAR Lifts also includes a huge variety of accessories making the lifts customizable for unique jobs. All of our heavy duty lifts are available in Wash Bay, Alignment and Explosion-Proof Area version. Available in capacities ranging between 31,000 lbs. and 99,000 lbs.
Capacities: 31,000 lbs. to 99,000 lbs.
Length: 20 ft. to 48 ft.
Collapsed Height: 2 in. to 15.2 in.
Raised Height: 79 in. to 82.6 in.
OMER's VEGA lifts combine peak performance and safety through its unique and proven design to optimize worker productivity. OMER's VEGA lifts are parallelogram style lifts that provide quick and safe access while providing the lift capacity for a wide range of heavy-duty commercial vehicles. OMER's VEGA lifts can be installed as surface-mounted or full flush mount. OMER's parallelogram lifts are engineered with lifting capacities from 50,000 lbs. (24T) to 120,000 lbs. (52T).
Capacities: 50,000 lbs. to 120,000 lbs.
Length: 26 ft. to 50 ft.
Collapsed Height: from 12 in.
Raised Heights: 73 in. or 77 in.
Platform widths: 30" or 32"
Lift versions:
CB Torsion Bar and Continuous Base
Open Floor Design
NTB with no Torsion Bar and Electronic Synchronization
Parking Systems
OMER's Bipark is a unique patented dependent 2-car stacker that can lift a car smoothly and quickly into position. Its sleek design allows vehicles to be parked in a relatively small space. The platform has different capacities and dimensions to be able to accommodate SUV's, 4-wheel-drive vehicles, and even low-clearance sports cars. Moreover, the galvanized platform structure is designed in such a way as to prevent fluids from the upper vehicle from dripping down on the lower one. Also suitable for outdoor installations, due to its small footprint and heavy-duty engineering; Bipark environments vary from private to residential garages and to valet-operated parking lots.
Loading Capacities: 5,700 lbs. to 7,000 lbs.
Dimensions: standard 86.6" wide x 142.5" tall to 94.5" wide x 142.5" tall
Max wheelbase up to 124''
Hot-Dip-Galvanized hardware for outstanding outdoor installation.
OMER's Tripark is a unique patented compact dependent 3- car stacker that allows to park 3 cars in an extremely limited space. Its sleek design allows vehicles to be parked in a relatively small space. It is also equipped with a galvanized platform structure that is specifically designed to prevent water or fluids from the vehicles on the upper platforms from dripping down onto the vehicles below. Also suitable for outdoor installations, due to its small footprint and heavy-duty engineering, Tripark environments vary from private to residential garages, to car clubs, car warehouses, car dealerships, and to valet-operated parking lots.
Loading Capacity: 5,500 lbs. per platform
Lower Platform Dimensions: 85.6 ‘' x 153.5 Upper Platform Dimensions: 81.5'' x 142.5''
Max wheelbase up to 124''.
Spacer 25/2 is an independent 2-car stacker which requires a pit. This design allows cars to move independently so that the car parked on the upper platform can be removed without moving out the car parked on the lower platform. Each platform can accommodate cars up to 5,500 lbs. each. Typically installed on indoor residential or private garages.
Loading Capacity: 5,500 lbs. per each platform (2 total)
Dimensions: from 90.5" x 204.7" to 102.4" x 204.7"
Double Spacer 25/2 is an independent 4- car stacker which requires a pit. This design allows cars to move independently so that the each car parked on the upper platform can be removed without moving out the cars parked on the lower platform. Each platform can accommodate cars up to 5,500 lbs. each. Typically installed on indoor residential or private garages.
Capacity: 5,500 lbs. per each platform (4 total)
Platform dimensions 181.1'' x 204.7'' to 204.7'' x 204.7''
The Duplo independent 2 car stacker is a “vault" car lift that is designed to park two vehicles in the space of one. One vehicle would be parked in the pit on the lower platform, while the other vehicle would be parked on the upper platform when the parking system is lowered. The upper roof can be customized to blend in with the surrounding area so that your additional car can be safely parked in the underground “vault". Typically installed on private garages, it's also suitable for outdoor environments
Platform capacities: 4,400 lbs. to 6,600 lbs.
Platform dimensions 86.6'' x 204.7'' to 106.3'' x 204.7''
Galvanized hardware for outdoor installation.
Car Lifts
The REX car elevator is a scissor lift system with capacity ranging from 5,500 lbs. to 6,600 lbs. They are uniquely designed to safely lift cars without the need to distribute the car weight evenly on the platform. Typically installed on private or public garages to have access, for parking, to a lower or higher level. Consider the optional top canopy to give an extra parking space to your “vault" car lift project. Several optional safeties will deliver a proven solution to comply to the required codings of your local Building Department.
Platform capacity: from 5,500 lbs. to 6,600 lbs.
Standard platform dimensions: 112.2'' x 204.7'' customizable up to 118.1'' x 236.2''
Max Platform Travel : 13.45'
Galvanized hardware for outdoor installation.
The MOVE car lift is a two-column system. With different column configurations on the platform design, the MOVE parking system gives an outstanding travel of up to 53'. Suitable for commercial, private and dealerships environment the optional top canopy to give an extra parking space on the “jewel box" car lift projects. Several optional safeties will deliver a proven solution to comply to the required codings of your local Building Department.
Platform capacity up to 6,600 lbs.
Standard platform dimensions: 112.2'' x 204.7'' customizable up to 118.1'' x 236.2''
Max Platform Travel : 53'
Galvanized hardware for outdoor installation.
Automatic and Semi-Automatic Parking Systems
Our Tecnopark & Store-Park are automatic and semi-automatic parking systems, respectively. Design your parking garage with stalls that can be doubled with Store-Park 2.0 or even tripled with Store-Park 2.1, if a pit is an option. Customize your parking levels with several different units; with capacity up to 23 cars (in 11 contiguous stalls), or even up to 35 cars, (in 12 contiguous stalls w/pit). Their futuristic design and rugged dependability are these solutions are the perfect parking systems to handle your modern high-density parking needs.
Platform capacities up to 6,600 lbs.
Several Platform Dimensions: from 90.4'' x 196.8'' to 102.3'' x 212.5''
Self-standing frame for standalone setting
Galvanized hardware for outdoor installation.
Car Display
A Ralla Turntable is a great solution to showcase your vehicle or provide enhanced maneuverability in tight spaces. With customizable solutions to match your flooring, table sizes, and loading capacities to meet your vehicle's needs: it is the perfect way to highlight any vehicle in your inventory.
Table loading capacities: from 5,500 lbs. to 17,600 lbs.
Table Diameters: from 5' to 26.2'.
Galvanized hardware for outdoor installation.
Light Duty Lifts
OMER's double scissors lifts are the ideal lifts for most passenger vehicles, ranging from compact cars up to light duty trucks. These car scissor lifts are innovatively built for safety and versatility. When compared to the traditional two-post design, they allow you to lift vehicles faster and more efficiently while also taking up less shop floor space. The lifting capacity for this family of products ranges from 7,700 lbs. to 10,000 lbs. capacity. Our double scissor lifts come in two different models: the FLY 35 and the IPPO 45.
Capacities: 7,700 lbs. to 10,000 lbs.
Length: 50.4 in. to 83.3 in.
Collapsed Height: 4.5 in. to 8.3 in.
Raised Height: 74.4 in. to 79.5 in.
OMER's KAR & FOX are superior platform lifts that offer a more accurate and precise wheel-alignment lift. The FOX service and alignment rack is designed with a minimal footprint, extending the use of the shop floor and giving uninhibited vehicle access for the operators. Both OMER Lifts offer innovative design which translates to greater technician productivity.
Due to the KAR's unique pantograph design there are no obstructions between the runways or the base frame, providing front to rear, side-to-side full access to the vehicle. Thanks to the FOX innovative master/double slave hydraulic system, the synchronization between runways is granted with the greatest precision. The pivots points are manufactured for longevity, incorporating an anti-rotation system, self-lubricating bushings.
Both the KAR and FOX platform runways are rigid and built to resist deflection regardless to vehicles wheelbase or weight distribution; this translates in precise alignment readings. The KAR and FOX 65 are both ALI Certified and built to the highest safety standards. Multiple safeties are built within the systems including parachute valves, mechanical safety devices, automatic insertion, photocells to control the synchronization of the runways, micro-switch with acoustic buzzer and “deadman" controls.
KAR Lift Alignment
Capacities: 10,000 lbs. to 18,000 lbs.
Length: 16 ft. to 20 ft.
Collapsed Height: 11.4 in.
Raised Height: 81 in.
FOX 65
Capacity: 14,000
Length: 18 ft.
Collapsed Height: 10.4 in.
Raised Height: 77.2 in.
OMER's mid-rise scissor lifts are the ideal lifts for a wide variety of vehicles, ranging from compact cars up to light duty trucks. Their compact design and smooth lifting motion allow you to safely lift vehicles quickly and efficiently. The unique design of these hydraulic car lifts make them ideal for performing service work on tires, brakes, body repairs and fast lube. The lifting capacity for this category is 6,600 lbs. / 3.0T. OMER's mid-rise scissor lifts come in two different models: the MINI and the MiG.
Capacity: 6,600 lbs.
Length: 61 in. to 83.5 in.
Collapsed Height: 4.1 in. to 9 in.
Raised Height: 39.3 in. (42 in. with adapters)