Membranes and Underlayments

SIM Crack Kit

PROFLEX® SIM Crack KIT is an elastomeric membrane kit specially designed to be used under approved thinsets, mortars, adhesives, and is typically used to bridge existing cracks up to 3/8" in flooring surfaces. The 18" wide roll allows installers to cover up to 12" tiles on a diagonal pattern. SIM Crack KIT is ideal for making small repairs to substrates without the time and expense of applying PROFLEX® membrane to an entire substrate.

Bonding Compound - ReBond It

PROFLEX™ Rebond It™ is an easy to use bonding compound designed to bond loose or hollow tiles without the costly expense of replacing them. The compound is a safe, easy to install, and easy to clean, is used by tile professionals and builders to provide an economical alternative to removing and resetting tiles or repairing hollow sounding tiles.

DPU - Deep Pour Underlayment

PROFLEX™ DPU is a self leveling compound of calcium aluminate cement, sand, and proprietary chemicals used to smooth and finish rough interior concrete or wood floors where a fast set is desired within hours. DPU may be applied up to 1 1/2 inches in a single application. Mixes with water, initial Set 3-5 hours, no troweling or grinding, self healing during flowing and working time, light weight and superior strength.

Grout / Color Caulking - Sanded and Unsanded

PROFLEX® Sanded and Unsanded grouts are a composition of polymer modified cement and high quality pigments producing color uniformity and durability for use in freeze thaw conditions. Sanded grouts can be used to fill joint widths greater than 1/8" up to 1/2". Unsanded grout is for use with grout joints of 1/8' or less. Matching sanded and unsanded caulk colors available.

CATALOGS VIDEOS DATASHEETS

COMPANY OVERVIEW

ALL PRODUCTS

Composite Underlayment - Maxxim Series, SIM 40

PROFLEX™SIM 40 is a 40 mil composite underlayment consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a siliconized release sheet on the adhesive side. Proflex SIM 40 is designed for full coverage crack suppression.

Composite Underlayment - Maxxim Series, SIM 90

PROFLEX™ SIM 90 is a 90 mil composite underlayment consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a siliconized release sheet on the adhesive side. PROFLEX' SIM 90 is specially designed to be used under approved thinsets, mortars, and adhesives for interior and exterior applications of ceramic tile, stone, and brick, and for interior applications of wood flooring to eliminate the transmission of cracks and to reduce sound transmission.

Composite Sound Control Flooring Underlay image

Composite Sound Control Flooring Underlay - SUPER SIM-90

PROFLEX™ SUPER SIM-90 is a 90 mil composite sound control flooring underlay consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a release sheet on the adhesive side. PROFLEX' SUPER SIM-90 is specially designed to be used under approved thinsets, mortars, and adhesives for interior and exterior applications of ceramic tile, stone, and brick, and for interior applications of wood flooring to eliminate the transmission of cracks.

Composite Underlayment - CISM 40

PROFLEX™ CISM 40 is a 40 mil composite underlayment consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a siliconized release sheet on the adhesive side. Proflex CISM is designed for full coverage crack suppression.

Composite Underlayment - SSC 70

PROFLEX™ SSC 70 is a 70 mil composite underlayment consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a siliconized release sheet on the adhesive side. Offers full coverage crack suppression.

Composite Underlayment - MSC 90

PROFLEX™ MSC 90 is a 90 mil composite underlayment consisting of a rubberized membrane laminated to a high strength reinforcing fabric on the face and a siliconized release sheet on the adhesive side. Proflex MSC is designed for full coverage crack suppression and sound control.

Crack-Isolation Membrane - AF300

PROFLEX AF300 (Anti-Fracture 300) is a ready-to-use single component mold resistant crack-isolation membrane. AF300 provides a uniform surface with excellent elongation to prevent in-plane cracks up to 3/8™ from the substrate to the finished ceramic, porcelain, or stone tile. For residential to heavy commercial application; interior and exterior use.

Perimeter Isolation Barrier - PIB

PROFLEX' PIB (Perimeter Isolation Barrier) is a low density polyethylene foam product. The product serves as a means to assist the installer in maintaining a 1/4™ perimeter isolation space along the perimeter of a flooring installation where a change of plane occurs. (Floor to Wall).

Hydra-Mesh

PROFLEX Hydra-Mesh is a reinforcing fiber mesh fabric that is used in conjunction with PROFLEX Hydra-Seal waterproofing membrane product.

Composite Sound Control Underlayment image

Composite Sound Control Underlayment - LV-200

PROFLEX™ LV-200 is an advanced composite sound control underlayment utilizing a combination of 100% recycled products to achieve superior IIC (Impact Insulation Class) and STC (Sound Transmission Class) sound reduction ratings for use under LVT (Luxury Vinyl Tile) and LVP (Luxury Vinyl Plank), Laminate, Engineered Wood and Hardwood. The product is also easy to install using a direct bond method.

Composite Sound Control Underlayment - RCU-200

PROFLEX® RCU-200 is an advanced composite sound control underlayment utilizing a combination of natural and engineered products to achieve superior IIC (Impact Insulation Class) and STC (Sound Transmission Class) sound reduction ratings. The product is also easy to install using a direct bond method, and is compatible with a variety of substrates and adhesives. PROFLEX™ RCU-200 thickness is 5mm.

CATALOGS VIDEOS DATASHEETS

Composite Sound Control Underlayment - RCU-250

PROFLEX™ RCU-250 is an advanced composite sound control underlayment utilizing a combination of natural and engineered products to achieve superior IIC (Impact Insulation Class) and STC (Sound Transmission Class) sound reduction ratings. The product is also easy to install using a direct bond method, and is compatible with a variety of substrates and adhesives. PROFLEX' RCU-250 thickness is 250/1000 of an inch or 1/4″.

Composite Sound Control Underlayment - RCU-500

PROFLEX™ RCU-500 is an advanced composite sound control underlayment utilizing a combination of natural and engineered products to achieve superior IIC (Impact Insulation Class) and STC (Sound Transmission Class) sound reduction ratings. The product is also easy to install using a direct bond method, and is compatible with a variety of substrates and adhesives. PROFLEX' RCU-500 thickness is 500/1000 of an inch or 1/2".

Backer Board

PROFLEX™ Backer Board is made of proprietary and patent pending technology. Ingredients include Magnesium Oxide, Magnesium Chloride as the primary components, with additional natural mineral components, woven and non-woven strengthening fibers. PROFLEX Backer Board is manufactured with a patent pending process and formula, using primary components of magnesium oxide and magnesium chloride. The manufacturing process uses less than 50% of the energy consumed to make a comparable Portland cement based wall board, and contains a minimum of 5% transferred post-industrial recycled material, and 100% of manufacturing post-industrial waste is recycled into future production runs.

Feather Finish Skim Coat - Feather Flex

FEATHER FLEX Skim Coat is a high performance, one component product for leveling and smoothing concrete, ceramic and quarry tile, terrazzo, wood, and water insoluble cut-back adhesive prior to the installation of finished flooring like VCT, continuous vinyl flooring, or other standard flooring products. This Portland cement based product mixes easily with water to produce a skim coat that is exceptionally easy to apply, does not require priming, and cures sufficiently for flooring installation in as little as 30 minutes, depending on thickness and drying conditions.

PSP - Pro Stick Patch

PSP (Pro Stick Patch) is a multi-purpose cementitious floor patching compound and skim coat. PSP is a polymer modified product that is capable of being used as a skim coat or patch by simply adjusting the liquid to powder mix ratio. PSP as an "All Purpose" material for the installer who requires product consolidation without giving up quality and performance. PSP also is designed to give maximum pot life, and regains workability by simply remixing without additional water.

IFR - Industrial Floor Repair

PROFLEX® Industrial Floor Repair (IFR) is a Portland cement based, polymer modified, fiber reinforced, rapid setting, one component, structural repair and leveling mortar. IFR is for interior and exterior restoration of deteriorated concrete elements and slabs. It may be placed into forms or used in horizontal applications. IFR may be used as an exposed industrial wear surface or as an underlayment for resilient, carpet, laminate, ceramic tile, and wood flooring

SLU - Self Leveling Underlayment

PROFLEX™ SLU is a cement based self-leveling underlayment providing a smooth and flat concrete surface. Installs quickly and can be delivered via pump or pouring methods. The self leveling properties eliminate the need for sanding, grinding, and troweling. For interior use only over primed concrete substrates.

DPU - Deep Pour Underlayment

SP 1 - Super Prime 1

PROFLEX SP1 Multipurpose Sealer / Primer is a pure acrylic based, solvent free product with multiple uses. SP1 may be used as a bonding agent with other Proflex surface preparation products, modified mortars, adhesive, and membranes when adhering to difficult substrates such as gypsum based concrete, epoxy coatings, vct, non-cushioned sheet vinyl, glazed tile, terrazzo, glass, and metal. SP1 can also be used to prime metal and resin backed tile to allow for modified mortar installation. *SP1 can also be used to encapsulates old adhesive residue, (including cut-back asphalt adhesive)

Resin Based Sealer - MB-25

PROFLEX™ MB-25 is a two component, epoxy reaction resin based sealer for professional flooring installation over damp sub floors.MB-25 will mitigate moisture pressure from a humid sub floor to an acceptable level for any flooring installation. It will bridge minor cracks in the sub floor. MB-25 spreads easily and creates a dust free surface ready for safe installation of flooring. It increases the bonding of subsequently applied primers, leveling compounds and/or adhesives.

Unsanded Thinset Mortar - Pro Stick 22

Pro Stick 22 is a unsanded thinset mortar used to set non-absorptive (vitreous or semi-vitreous) tiles for interior or exterior use. When mixed with water it provides a suitable bond coat to adhere tile to plaster, concrete, and masonry surfaces. For added performance, PROFLEX™ Liquid Latex Additive may be mixed with dry set mortar. With the addition of, Liquid Latex Additive, Pro Stick 22 may be applied over exterior grade plywood and PROFLEX™ membranes.

Thin Set Mortar - Pro Stick 27

PROFLEX PRO-STICK 27 thin set mortar has superior performance and workability characteristics not found in regular thin set mortars, along with an extended open time. When mixed, it produces a creamy, easy to spread mortar specially developed for the professional tile setter. For commercial and residential use.

Thin Set Mortar - PRO-STICK 32

PROFLEX' PRO-STICK 32 (ANSI 118.4) thinset mortar has superior performance and workability characteristics not found in regular thin set mortars, along with an extended open time. When mixed, it produces a creamy, easy to spread mortar specially developed for the professional tile installer. For commercial and residential use.

Thin Set Mortar - PRO-STICK 37

PROFLEX™ PRO-STICK 37 thin set mortar has superior performance and workability characteristics not found in regular thin set mortars, along with an extended open time. When mixed, it produces a creamy, easy to spread mortar specially developed for the professional tile setter. For commercial and residential use.

Thin Set Mortar - PRO-STICK 42

PROFLEX' PRO-STICK 42 (ANSI 118.11)thin set mortar has superior performance and workability characteristics not found in regular thin set mortars, along with an extended open time. When mixed, it produces a creamy, easy to spread mortar specially developed for the professional tile setter. For commercial and residential use.

Rapid Thin Set Mortar - PRO-STICK 42R

PROFLEX' PRO-STICK 42R (ANSI 118.11) is a rapid set thin set mortar is formulated to be a fast setting mortar with superior performance and workability characteristics. PRO-STICK 42R When mixed, has an initial setting time of 1 hour. Specially developed for the professional tile installer. For commercial and residential use.

Dry Set Mortar - PS 42L

PS 42L is a polymer modified dry set mortar composed of lightweight aggregates, sand, cement, dry resins and other proprietary chemicals used to adhere virtually all types of tile, especially large tile units, marble, and granite to acceptable surfaces. Due to its light-weight and flexible properties, PS 42L installations provide higher resistance to cracking than normal mortars. PS 42L is especially formulated to hold large units in place on vertical surfaces. PS 42L also reduces unevenness caused by setting of the tile when used on horizontal surfaces.

Polymer Modified Mortar - SUPER STICK

PROFLEX™ SUPER STICK (ANSI 118.11) is a polymer modified mortar composed of sand, cement, dry resins and other proprietary chemicals used to adhere virtually all types of tile, especially large tile units, marble, and granite to acceptable surfaces. Super Stick is ideal for use over all Pro Flex membranes to assure maximum performance.

UAR - Urethane Adhesive Remover

Benefits: ™ Removes wet or uncured urethane adhesive from wood flooring surfaces. ™ Cleans tools. ™ Strong & effective. ™ Easy to use. ™ Formulated for professional installers.

Latex Based Adhesive - PWA-160

PROFLEX PWA-160 is a premium, high solids, acrylic ™ urethane latex based adhesive designed for the demands of wood floor installations.

Urethane Adhesive - PWA-200

PROFLEX' PWA-200 is a superior one component moisture curing urethane adhesive. PROFLEX PWA-200 possesses high strength bond properties with superior elasticity allowing a good wet / green grab, a superior non-slump capability, and excellent shrink resistance allowing consistent contact between the wood flooring and substrate.

Urethane Moisture Barrier And Wood Flooring Adhesive image

Urethane Moisture Barrier And Wood Flooring Adhesive - PWA-500

PWA-500 is a two in one urethane moisture barrier and wood flooring adhesive designed to install material such as: Laminated/engineered flooring and parquet flooring over wood or concrete Application of this product gives the moisture barrier and the wood flooring adhesive in one trowel on application.

Polyurethane Adhesive - PWA-600

PROFLEX™ PWA-600 is a 3-in-1, single step, water free, polyurethane adhesive formulated to bond engineered wood, solid wood and bamboo flooring. This solvent free, moisture cure urethane formula performs as an adhesive, moisture vapor barrier and sound reducer.f

Engineered Adhesive - PWA 700

PROFLEX™ PWA 700 is an engineered adhesive formulated for use in the installation of all types of wood flooring. It is 100% solids (contains no water), is solvent and isocyanate free, and has no negligible VOC content.

Urethane Adhesive - ProBond

PROFLEX™ ProBond Adhesive is a moisture cure urethane formulated for fast grab with excellent green strength to prevent boards from slipping in wet adhesive.

Moisture Guard Sound Control - MGSC

PROFLEX™ MGSC is a single component moisture curing urethane. Designed for easy trowel on application over concrete. MGSC flows to achieve uniform coverage when applied and cures overnight to form a low tack, elastic membrane. MGSC is environmentally superior to most alternative moisture retardation systems, possessing very low V.O.C and odor.

Pressure Sensitive Adhesive - PS-75

PROFLEX PS-75 Pressure Sensitive is a premium acrylic emulsion that combines the excellent performance of a pressure sensitive adhesive with environmental safety characteristics. PS-75 is releasable, non-flammable, non-hazardous and water resistant. It provides a strong, long lasting bond. PS-75 is designed for the installation of dimensionally stable vinyl-backed carpet tiles and vinyl tile & plank in a releasable application.

Pressure Sensitive Adhesive - PS-76

PROFLEX™ Pro Stick 76 Premium Pressure Sensitive Adhesive is formulated to install luxury vinyl tile (LVT), luxury vinyl plank (LVP), carpet tile, fiberglass backed sheet and sheet vinyl flooring. PROFLEX™ PS-76 provides a high strength water resistant bond and protects against bacteria growth. PROFLEX™ PS-76 is a VOC compliant adhesive certified by CRI™s Green Label Plus, RFCI™s FloorScore and UL GREENGUARD.

LVT VCT Rubber Vinyl Adhesive - PS-77

PROFLEX' Pro Stick 77 adhesive is a specialty, solvent free adhesive used for the installation of a variety of Rubber and Vinyl backed products including Luxury Vinyl Tile, and Vinyl Composition Tile. Pro Stick 77 is a pressure sensitive adhesive that will cure to a permanent, hard-set bond.

Pressure Sensitive Adhesive - PS-100

PS-100 is an acrylic pressure sensitive adhesive designed for the installation of fiberglass reinforced sheet vinyl, vinyl backed carpet tiles and commercial carpet cushion. This product may be used as a releasable adhesive or a permanent adhesive (if flooring is installed while adhesive is still wet a permanent bond will be formed).

Grout Admixture - GROUT GUARD

PROFLEX™ GROUT GUARD is a water based, environmentally friendly low V.O.C. grout admixture. Use of Grout Guard eliminates the need for topical sealers. This product will not affect clean up, workability, dry time, or pot life of grout. Grout Guard creates a harder/denser grout that is crack resistant, mold/mildew resistant, water repellent, and stain resistant.

Grout Release - PROFLEX

Grout Release is a temporary water soluble pre-groat coating that protects tile and stone surfaces from grout and mortar stains. Easier clean-up with strong water based stain protection.

Sulfamic Acid Cleaner

PROFLEX'SULFAMIC ACID CLEANER is a concentrated crystalline form of sulfamic acid for use in a water solution to remove cement smears, excess grout, efflorescence, and other mineral deposits.

Water Based Penetrating Sealer

A water based penetrating sealer designed for the protection of all porous surfaces including grout, tile, natural stone, quartz, engineered stone, terrazzo, concrete, quarry tile, ceramic tile, porcelain tile, brick & masonry surfaces. Ideal for both interior and exterior applications and is nonflammable and V.O.C. compliant.

Impregnating Sealer

PROFLEX' IMPREGNATING SEALER is designed to protect most tile and stone surfaces from oil and water based stains. Formulated to penetrate tile and stone surfaces, while leaving the treated surface looking natural with minimal change in appearance. Ideal for use in high traffic and areas prone to oil and water stains.

Enhancing Sealer

PROFLEX' ENHANCING SEALER is our IMPREGNATING SEALER with added chemicals to enhance and brighten the natural colors of the surface being applied to. Dries clear with no yellow haze, while still offering protection from oil and water based contaminants.

Porous Sealer

PROFLEX' POROUS SEALER is specially formulated to penetrate extremely dense and porous surfaces. Premium protection from oil and water based stains. Formulated to leave a natural finish, dries clear and non yellowing. Ideal for use in high traffic areas, or where surfaces are exposed to oil, dirt, water, or environmental damage.