Need to work at height in places where standard scaffolding won't fit? Don't risk downtime or injury by using inadequate height access products. Get all the benefits of a scaffold system along with the convenience of a small portable work platform, with SafeSmart's Mini Mobile Scaffold.
Whether you are building, renovating, painting, cleaning or carrying out maintenance tasks, this system can be utilized indoor easily, with a width of 2' 3", it fits through standard-width internal doors. The unit is constructed from high-grade (T6) weather-resistant aluminum, which features 2.9' 10" thick tube walls, for portability and strength.
This unit is easily and quickly assembled by one person, with the platform being mounted securely via a channel-locking system, which does not need a plan brace.
Available as a complete system or come back to us to add componentry.
SafeSmart USA's Mini Mobile Scaffold brings the convenience of a small scaffolding system to indoor and tight spaces.
For painters, electricians, renovators, maintenance contractors and more – don't risk using wobbly ladders just because you're working inside. Benefit from standing on a full-sized platform and somewhere to put your tools by wheeling this system through any internal standard-width door.
And add greater configuration flexibility by incorporating these expansion options. The all-terrain stair pack allows you to have the unit set up on two different levels of floor or steps; perfect for gaining safe and stable access to stairwells and voids.
Our long board packs allow you to join several Mini Mobiles together to make a temporary bridging system, or a long mobile scaffold. While we're expanding, also add the Corner Pack Series 700 to join systems in a perpendicular way.
All additions are as compliant as the core system itself. And effective and safe.
A versatile and easy to use system, this little scaffold is handy for many situations. Access lower heights, with plenty of room to stand and instant edge protection, during works in galleries, whilst painting, carrying out maintenance tasks or anything else that requires safe and compliant equipment for getting the task done fast.
The unit is easily wheeled around by one person, thanks to lightweight yet strong high-grade aluminum, and it fits through standard-width internal doors. Features a folding base section and snap-lock graspers for protecting your fingers from pinching. Easy to install and put away. Foot-locking castors make the unit secure in place when being used.
A channel-locking brace system adds sturdiness. The platform is available in varied platform heights from 6' 6" to 16' 4", along with a choice of deck lengths. And optional guardrail and/or base + guardrail pack makes the system one of the most versatile on the market.
These scaffold towers are made from high tensile 6261 T6 aluminum extrusion. They are popular with many industries across America, and they comply to strict regulations for working at height.
Extrusions feature 0.14"-thick walls, and the system can be further-stabilized by adding optional outriggers. SafeSmart's towers also have more cross-bracing than standard competitors' systems. SafeSmart also makes this product, for use in tight access areas, with easy and safe access to the Latvian birch platform deck via a weather-resistant trapdoor.
And for even more stability, the foot-braked castors automatically center themselves under the spindle – the ‘automatic movement' feature. All frame joints are fully-welded to eliminate any weak points. The unit weight rated at 992lb SWL and is available in a range of different platform heights, lengths and reach heights.
For H-frame scaffold towers, add more strength with our outriggers. These are made from high grade aluminum for easy handling and strength.
And for easy rolling, and stability whilst in use, we make our height-adjustable castors available separately as a spare or an add-on to an existing system. These castors feature a 12" adjustment range and a massive 1323lb load rating, ensuring years of excellent performance.
SafeSmart's own Premium Series scaffolding range is one of the hardiest and effective systems on the US market. In this series is a double width option, for those who need a wider platform work area. Featuring high-tensile 6261 T6 aluminum components and .013"-thick aluminum extrusion walls, you're assured high performance for weight rating and longevity.
When in use, there is a notable reduction in ‘flex' and ‘sway' on our system compared to others. And the Snaplock brace system makes assembly and tear down faster and easier. A full-grain Latvian birch platform has an anti-skid plywood top and an internally-accessed hatch.
When working in tighter spaces and indoor areas, gain access to low-level heights properly and safely with SafeSmart's scaffold towers. Leave the risky wobbly ladder aside and gain benefits from a big enough platform to stand on and easy manoeuvrability.
With our Trade Series products, anyone can afford a small scaffold tower. Add safety, compliance and efficiency to your work activities. This system is fast and easy to set up, and foot-lockable castors secure the unit in place when being used.
Made from high grade aluminum, this scaffold model features a weight rating of 496lb and comes in a variance of platforms heights from 8' 2" to 16' 4".
SafeSmart Access are a national leader in solving height access challenges across all industries. When you need height access to increase efficiency, safety standards and to protect your staff from injury, you need a supplier who understands your business. In the United States, that supplier is SafeSmart Access.
With branches in Los Angeles, Cleveland and New York, we supply solutions to aviation, defense, manufacturing, construction and more. From a compliant ladder to large-scale customized solutions, we can create almost any product that will help your business to reach new heights.
Reaching New Heights
Since 2007 SafeSmart have been bringing safe and smart portable height access solutions to businesses across the globe. And in all countries, our products meet or exceed regulations set for safety in their respective region. For the USA, SafeSmart has a thorough understanding of regulation put in place by OSHA (Occupational Safety & Health Administration). These regulations inform our ideas behind the design of all of our solutions, too.
Safety and practicality: working together for you.
Work and Access Stairs
Whether it is permanent or portable, SafeSmart have designed and built countless aluminum stairs for clients all around the world. From fire escapes to container access stairs to embankment access and more SafeSmart understands regulatory requirements of each application and supply to strict compliance demands.
Each stair or stair and rail system is engineered and welded offsite, so onsite installation is down in one action, and fast. And all-welded joins create a stronger build than traditional fastener-based joins.
In the construction market in particular, we saw the need for faster and safer lower-level height access, between project floors, into trenches and more, especially where inadequate, unstable and unsafe ladders were being used.
We developed the AdjustaStairs design to bring the full convenience and functionality of permanent stairs to situations where the portability of a ladder is required. These stair systems feature self-levelling steps, so you can stand on a completely flat tread when the unit is placed at a variance of pitch angles – from 25° to 50°. And when you need to transport it, the unit packs down flat in one movement via collapsible handrails and steps that auto-fold back within the side rails.
SafeSmart's own AdjustaStairs product leads the way in the construction industry for highly-portable and effective temporary stairs. We take the concept one step further with a flat plate adapter that makes this system perfect for gaining safe and efficient access to truck trailers.
These truck access stairs will work for tray heights from 3' 3" to 4' 11" and are made from high grade aluminum for strength and hand-portability. For quick and easy redeployment, the handrails collapse in a matter of seconds, and the self-leveling stair treads accommodate a level and safe place for the feet within a great range of pitch angles.
Strutlock fittings eliminate the need for fixings. This stair system is perfect for anyone who works around and on trucks in places where permanent docking encourages clambering onto the tray. Do it the safe and smart way with us.
SafeSmart's AdjustaStairs product is fast-becoming a market leader for adjustable stairs.
We also offer this system in customized configurations, like this one that was made for a client in Los Angeles.
The client wanted a very specific stair width and depth, in order to comply with a very specific OSHA code for stretcher stair access – this allows workers to pass each other safely, when more than one person uses the unit simultaneously.
Our popular AdjustaStairs in aluminum is seen on worksites all across America, used in many different industries and applications. For contractors who work in electrically-live environments, this product is also available in non-conductive material – AdjustaStairs portable stairs in fiberglass.
At 1' 11" in width, these stairs come in many sizes, with adjustment ranges from 2'11"- 4'7" to 3'3"- 4'11" and an impressive weight rating of 661lb, so you can confidently use these stairs with tools and supplies in hand.
Use these portable stairs for
Working around electric train lines.
Any major electrical project.
Floor-to-floor access in construction sites where live electricity is present.
Carrying out maintenance work around electrically-powered machinery.
Any electrically-live work environment.
Our single-width AdjustaStairs portable stairs product is one of our most popular standard range units. Now, we supply this market-leading system at twice the width, for easy and safe two-way access.
Excellent for access into trenches, temporary batter access, between multi-level construction site floors and into pits, AdjustaStairs portable stairs are made form high-tensile aluminum and can be placed at a variance of pitch angles thanks to its self-levelling stair treads; your feet are always on a truly horizontal step.
With a width of 47.2", contractors do not have to wait for each other to use the stairs; they can safely and quickly use the stairs at the same time, passing with enough space to also carry tools. In addition to time savings, the AdjustaStairs Double brings strength and stability – an 1100lb weight rating thanks to an additional underside truss.
These temporary stairs can be easily folded down via a collapsible handrail and redeployed in another location quickly by two people.
Height adjustability range is 8' 6" to 11' 9" with 14 steps, and its lifting points allow it to be craned into tricky or higher-level locations
SafeSmart Access USA's AdjustaStairs portable stairs are seen on constructions sites, heavy vehicle facilitates, maintenance areas and more across the USA, helping workers to put ladders last when the scenario demands a more safe and efficient way.
For construction in particular, client demand lead us to produce AdjustaStairs systems that reach higher than ever before.
Save time and money from not having to build scaffold stair towers.
The Platforma is our new adjustable fiberglass platform ladder with far superior capabilities to any other ladder in the market.
Each model comes with wheels and surround guardrails, which saves the user from having to tie off.
Free shipping nationwide
Height adjustable for working off a large safe platform at variable heights
-Platform heights adjusted through each ladder range in seconds
Set front and back stiles to varying heights for working on steps or uneven ground
Handrail allows for 3 points of contact.
Large rubber feet for stable grip and hard-wearing
Rated to 300lbs for industrial applications
One-piece, smooth operation – simply folds flat and locks
Made from high-strength non-conductive fiberglass
Work Platforms
Utilizes components of the Mini Mobile system: custom stairs, longboard packs, corner packs create two side platforms and a rear joining platform, In this instance, the system is used to assist with caravan builds.
The modular nature of the Mini Mobile system allows for easy addition of length, if required.
SafeSmart Access often utilises existing products and combines them to create customised systems that are quick and easy to deploy.
Crane side access platforms are designed to provide safe and stable access to the entire crane, between the stabilizers.
Rear return stairs ensure platform access to the complete length of the crane.
Available in different platform sizes to suit different makes and models of mobile crane.
Systems are wide enough to store tools and equipment on the platform; they are ideal for use in conjunction with small, mobile platforms to provide safe access to any area on your crane.
Our client was operating both D11 and D10 Caterpillar dozers, on which they carried out scheduled maintenance.
Of course, uneven and slippery surfaces on these machines can create a dangerous scenario for potential falls and injury. And some of the most dangerous surfaces were those that needed standing on, to reach critical points of maintenance.
SafeSmart Access was commissioned to design and build a customized platform to keep workers of engine cowls, tracks and more. Loosely based on a standard line product—the Super Maintenance Platform (SMP)—the dozer access platform is easily wheeled up to the vehicle, with a cantilevered standing area that hangs well-balanced over protrusions.
This system is made form high-tensile aluminum for light weight portability and weather resistance.
Need something similar? Let SafeSmart assess your site and equipment and create a solution that will bring you added safety and efficiency. Contact us now.
Many heavy vehicles present challenges for height access safety during maintenance – curved walking surfaces, slippery underfoot, awkward protrusions and more. This example system was created for a client who operated a tanker truck fleet. They needed fall protection in an all-in-one unit when accessing hatches and connection points.
Standard ways of doing this was deemed too dangerous, so the client asked SafeSmart to design and build this aluminum heavy vehicle maintenance platform. Telescopic handrails jut out over the top of the tanker, reducing overreaching, and the platform eliminates the need for workers to stand on top of the tank itself.
SafeSmart custom-design and build many similar units for clients around the world. For any application or vehicle, get in touch with SafeSmart now.
A metropolitan rail operator in Sydney Australia needed a complete ‘all-in-one' system for gaining access to the top and doors of their rolling stock during maintenance. And because their facility had no permanent docking to suit all types of trains, the system needed to be easily maneuvered in addition to being strong.
Maintenance is carried out on overhead systems of the train and within door-level compartments. SafeSmart took measurements of all critical access points and utlilized their in-house design team for creating a unique mobile platform. This two-level platform is made from high-tensile aluminum and features integrated power outlets and a rubbish chute for easy disposal of debris without having to climb down.
Rubber buffers and flaps help to protect the train itself from the platform.
Since this installation, similar operators in the UK have commissioned SafeSmart to supply systems like this for their workshops. SafeSmart can design, manufacture and deliver these products to anywhere in the USA.
When maintenance staff have to walk on uneven and slippery surfaces for maintenance activities, it can be a recipe for accidents and injuries. A SafeSmart client who operated a fleet of plant machines experienced this. Inadequate ladders and steps were constantly being repositioned and contractors were not able to reach engine bays and other points of maintenance without overreaching.
SafeSmart's in-house design team came up with this loader platform, made from high-tensile aluminum for hand-portability and weather resistance. The system simply wheeled up to vehicles and foot-locked into place, creating an extra set of steps and stable working platform on both sides of the loader, as well as a platform that spans across the entire loader, for access to windscreens and the engine. And despite being custom in nature, the unit is as compliant to OSHA codes as any other ‘off the shelf' unit is.
We can design and build any platform to suit any plant equipment – Caterpillar, Komatsu, John Deere, anything.
Originally designed for a client in Australia, this platform—similar to, and based on our truck loading platforms—allows safe and efficient access to the side of a locomotive for engine maintenance.
Work on these locomotives needed to be done away from any permanent platforms, outside of the workshop, often in remote maintenance locations where no permanent height access infrastructure is present.
This high-tensile welded aluminum platform is simply wheeled by hand up to the locomotive and foot-locked into place. Maintenance contractors are able to work with a hand free for tools, complete with edge protection.
This client needed access over the front of a sheepsfoot roller during maintenance and windscreen cleaning. The irregularly-patterned and cylindrical shape of the roller itself made for a very dangerous situation when clambered on, especially if any residual mud, debris or water was present.
A full-surround solution like a loader platform wasn't required, so Safesmart identified a simple solution, already existence in their range. With a bit of customization for add-on components, and the use of two Super Maintenance Platforms (SMP), SafeSmart were able to provide an easy-to-wheel and deploy bridging system that helps workers scale the machinery with a wide, level and stable platform underfoot.
Comprised of two SMPs and a well weight-rated aluminum bridge, this system has helped the client get the job done faster and more safely.
Designed from scratch by our in-house team, this hand-portable aluminum platform brought our client added efficiency and safety during maintenance and cleaning tasks on their bus fleet.
For access to bus roofs and windscreens, the client's workers are no longer using dangerous ladders, which needed to be constantly repositioned – a time-consuming activity. The aluminum is high-tensile for strength and welded joints provide rigidity. This unit was designed as an L-shape with stairs running perpendicular to the platform, so the whole system can fit into a narrow workshop.
SafeSmart is always engaged in such projects for buses, trucks, trains, trams, you name it. If your workplace needs to improve its productivity and safety, call us now.
Designed and built by SafeSmart for a client who needed better access over otherwise uneven and slippery surfaces on a refrigerated road transport vehicle.
The end result was a large, safe work area for two men and tools, and stair access, rather than unstable ladders, for ease of carrying materials
Whether you are performing maintenance, cleaning, handling goods or anything else, safe and efficient height access is essential. In areas where there are no loading docks or sufficient steps or ladders, it can be tempting to take the risk of clambering onto flatbed trailers. This is why SafeSmart designed the SafeLoader.
Featuring 45-degree stair access, a self-closing gate, and easy-to-wheel lockable castors, this unit is made from high-tensile aluminum and is fully compliant with OSHA requirements. During loading/unloading, now the worker has a full-width platform to stand on rather than a narrow area along the length of the flatbed.
And the 8.6"-deep braced stair treads feature a coarse non-slip surface for added safety in wet or icy conditions. The unit can also be easily lifted and transported thanks to its well-placed crane points.
• Full guardrailing and self-locking swing gates for safe, fast access to work surfaces.
• Large work surface and 496lb SWL for all maintenance requirements.
• 8" solid rubber wheels allow for easy relocation on all terrains for sizes 2 to 6 step.
• Four large swivel/brake casters on larger 7 to 10 step units, allowing for easy relocation by a single operator.
• Available in 2 to 6 step models with 31"x31" platform, and 7 to 10 step with 3' 3"x3' 3" platform.
• Engineer's approval, SWL rating and serial number certification plate.
• Built tough with 3.2"x1.96" marine grade aluminum RHS.
• Perforated and swaged deck for superior traction in wet and greasy conditions.
• 45-degree access keeps hands free for carrying tools.
• Left-hand and right-hand gates available, allowing for flexible configurations.
A New Zealand client, Branz New Zealand, needed a faster and more safe way of accessing heights during fire tests and when fixing cladding to false walls. With each wall being a different height, they needed a platform that was easily adjustable.
Designed by SafeSmart's in-house team of engineers and designers, this adjustable height platform is made from high-grade aluminum for strength and weather resistance and features a smooth hand-operated winch for height adjustment.
Several more custom designs have since been created based on this concept for clients in the USA and Canada.
Easy to use, walk in/walk out access.
Two platform height settings: 2' 5" & 3' 3"25H.
Full surround handrails.
Folds up flat for compact storage in seconds.
Perfect for ceiling work and low level access Large non-slip aluminum one man platform.
Platform size: 1' 11" x 3' 11", Platform Height: 2' 5" - 3' 3"
Originally created for a major infrastructure construction client in Sydney, Australia.
For access and installation of services in road and rail tunnels.
Able to be quickly relocated by a single technician between work areas.
No set up time - simply place in position and ready for use.
Designed with locating pins to lock in position in ferrules in tunnel segments, or hooks to locate over service pipes in tunnel.
Workers installing electrical brackets and cabling in road tunnels faced challenges in accessing over concrete barriers to reach the installation point.
These long access platforms, with a large overhanging cantilevered section on the tunnel wall side, allowed them to get up close to the work area and also use the space on the platform to store tools and equipment.
The platforms are designed to be quickly moved up the tunnel by one person, increasing efficiency.
Originally designed for a client who operates in large infrastructure construction in Sydney, Australia.
Provides access to workers for finishing services in tunnels.
Aluminum construction is much neater and provides excellent resistance to any corrosive elements present.
Aluminum also make the system easy to maneuver by hand.
The whole gantry can be craned/lifted into place quickly.
Flat Walkways for Curved Tunnels
This product was originally developed for a client in Sydney Australia who operates in the large infrastructure construction.
To eliminate slipping hazards presented by the curved tunnel wall, workers can move along the length of the tunnel on a flat surface, complete with edge protection.
SafeSmart has since implemented this system in similar projects around the world.
Based on our standard Cantilever Platform with the ability for the cantilever section to adjust to a 3' 3" range. In addition, for one client, we custom-designed this one to have a step through gate that allows the operator to step through into an area enclosed by a loop handrail.
For machinery service workshops, distribution centers and anywhere low-level height access also requires assistance with reaching out to work areas.
Made by SafeSmart, this mobile work platform features a hefty 496lb weight rating and a thick welded aluminum frame. A non-slip perforated deck stays well-drained in wet or icy conditions.
Easily wheel the unit around and secure it into place on its 7.9" heavy duty foot-lockable castors. And stand on the unit with full-surround fall protection, thanks to the hinged safety bar. Also, safely step onto flatter area from the front of the unit via the spring-loaded gate.
Compliant with OSHA regulations for working at height.
Available in several-sized models
Featuring thick 3.3" x 1.9" marine grade aluminum RHS, and a 0.15"-thick aluminum plate platform, this maintenance stand provides fast and safe low-level height access in a countless amount of industries and workplaces.
Eliminating the use of dangerous ladders, this Super Maintenance Platform (SMP) gives you portability and ability to work with a hand free, thanks to a full-surround edge protection rail. And the 31.5" x 31.5" perforated platform deck accommodates a place to put tools and equipment without them getting in the way.
Foam-filled anti-puncture wheels and hardy rubber feet make the unit easy to maneuver and stable underfoot when being used.
496lb SWL, depending on model chosen, from 2-step to 11-step models.
Add more tip-prevention and fall safety to your SafeSmart podium or similar by using our Balcony Ceiling Jacks.
Working on balcony ceilings can present serious fall dangers, especially if it being done adjacent to an open air height. Secure your podium or platform by adding this product to any 1.9" tube fitting. You can also use these jacks upside down as levelling jacks.
Made from high-tensile aluminum and ready to ship USA-wide.
Height access in interior spaces can be a challenge. In commercial and corporate properties, maintenance often needs to be carried out over furniture and other obstacles without being able to move anything for placing a ladder.
SafeSmart's Desksurfer (DS) was designed to be easily wheeled through standard-width doorways and deployed—thanks to its cantilevered design—over desks and other objects without the need to disturb a work area or its occupants. The Desksurfer's cantilever reaches 35.4" outwards – excellent for building maintenance, painting, lightbulb replacement, IT installations, power installations and many more applications.
Now, you can stop climbing on the furniture and disturbing the work environment. And you can get the job done faster and safer, with SafeSmart's Desksurfer.
Dimensions are 25.6" x 53.1" x 75.3" for easy transportation. It will fit through a 30"x78" door. This allows it to easily enter any standard elevator to go from floor to floor. An adjustable height range of 3" to 7.4" accommodates access over varying furniture heights.
Work over desks easily now by contacting SafeSmart for a quote and delivery to anywhere in the USA.
The Desksurfer Maxi (DSM) is the same general design as the Desksurfer, and uses a unique weighted mast instead of a hand crank to adjust in height. Simply push the mast into position and the mast will level and lock in to the desired height.
The Desksurfer is a must for every facilities maintenance coordinator.
89" Max deck height
13' Reach height
Includes:
Tool tray/seat
Surround flooring castors
Surround safety rails
Hinging gate
Constructed of 6061 aircraft-grade aluminum
Net weight 145lb
Base Size — 27" x 49"
Platform Size — 20"x 34"
Minimum Platform Height — 36"
Maximum Platform Height — 89"
Platform Adjustment — 11" increments
Eliminate the dangers of using standard step ladders and the like for low-level height access and ceiling work. SafeSmart's Balcony Work Platform adds more strength, portability and built-in fall protection in one unit.
For painters, electrical contractors, maintenance personnel, IT installers and more, the podium platform is design to be easily wheeled by hand through standard-width doorways, including when fully-expanded. This system can be deployed in a matter of seconds to two height settings – 2' 6" and 3' 4". The podium is constructed with high-grade aluminium, with fully-welded full-surround handrails, as well as a wider wheel base for preventing tipping.
The Balcony Work Platform is weight rated at 331lb and is further stabilized by the addition of scaffolding ceiling props for working on open air heights like balconies and elevated slabs.
Designed and made in-house by SafeSmart fro a client who needed safe access to a vertical cylindrical piece of infrastructure daily. Temporary ladders and the like were being used, however with the surrounding ground being uneven and the frequency of the job, the client asked us to come up with something more permanent.
This platform is made from high-tensile aluminum and is designed to provide access around the cylinder and to a control system via a half-moon cut-out in the floor.
SafeSmart can design and build any platform like this, complete with specified weight ratings and compliance with OSHA regulations.
Constructed from high tensile aluminum, and specially-designed by our in-house design team, SafeSmart can fabricate any type of stairs, platform, bridge or anything else for helping workers to 'take the shortcut' safely.
Previous clients have been airport baggage operators, oil and gas companies and more.
Modular components are used to create any length ladder required.
Design your own using ladder extrusion, hoop guardrails and fixing brackets.
Landing platforms available for ladders 19' 8"+ long.
Our Canadian branch takes on many commissions for creating safe access over pipes and other obstacles in various resources industries. With everything from icy conditions to corrosive environments, SafeSmart custom designs and builds fixed service platforms, stepover platforms and other steps, ladders and platforms for the safe scaling of low-level infrastructure.
In the USA, SafeSmart offers the same service – of course, any customized system is compatible with any workplace in the States, too, from oil rigs to treatment plants and more.
We can visit your site for a free safety assessment and use our own in-house design team to create a walkway that suits your work area perfectly. SafeSmart only uses high-tensile aluminum for robustness, as well the option of materials such as timber or fiberglass in more electrically-active environments.
For creating specialist egress and ingress over ground-based obstacles, SafeSmart supplies a complete modular system, made from high-tensile aluminum.
These components combine in many different configurations to create steps, stairs, platforms and more for safely stepping over pipes and machinery. And for even more specialized scenarios, our custom department can create anything from scratch to suit your needs perfectly.
Our modular system is popular in HVAC, resources, oil and gas and other applications and industries such as at airports and distribution centers, for fast yet safe pedestrian shortcutting over conveyor belts and goods transfer systems.
The Smart Two-Man Work Platform
With a 16"-wide deck and complete OSHA compliance, this portable work platform helps workers to gain access to low level heights fast, with complete fall protection. And with scissor-action legs, the unit is easy and fast to pack down in one movement for relocating or transportation.
Made in New Zealand from high-grade aluminum, the Super Trestle is a far more efficient and safer option than the traditional plank-and-sawhorse technique. This is a very versatile two-man work platform, suitable for use in all industries – mechanical, oil and gas, utilities, construction, aviation and more.
Used to join multiple super trestles for a larger work platform
Create a full surround work platform in seconds
Can be joined end-to-end or side-to-side
For offshore and land-based resources clients, SafeSmart Access are frequently commissioned to custom design and build stepovers, catwalks, gangways, steps and ladders, for safe access over and around pipes, machinery and more.
Our systems can be permanent, semi-permanent or portable, and made from either steel or high-tensile aluminum. This example platform was designed in-house to provide a hefty 496lb weight rating and easy access over floor-based pipes on an offshore oil rig; in this case, aluminum was used due to the corrosive ocean environment.
All professionally welded by SafeSmart's fabricators, and completely compliant with safety regulations, our systems safe workers' time and the company's bottom line.
Edge Protection
This system was originally conceived for a company that needed safe access to the roofs of office trailer for maintenance. Based on the same fixing-free edge protection idea as our EasyRail system, this product provides instant full-surround edge protection.
Eliminating a trip-prone harness, the rails are simply wheeled up to the office trailer and held securely into place via foot-lockable castors.
Compliant with OSHA requirements, and ready to be delivered to any worksite in America.
Combine several of our Mini Mobile scaffold system to create a full-length or full-surround edge protection system.
Simply roll the Mini Mobiles to the structure, connect and secure into place via foot-lockable castors. Now, gain faster and safer access to the facia without risking a fall. A channel-locking brace system reduces obstruction.
And Mini Mobiles are designed and assembled with a channel-locking system, eliminating the need for obstructive bracing, providing easy open-sided access. And every deck features a substantial weight rating of 496lb – also, additional stairways can be placed at either end for easier access with tools in hand.
Faster and easier to install than the more traditional ‘post and panel' edge protection, King Klampz requires no connection to the slab. And being fixing-free, removing the rails leaves to holes to fill of damage to repair.
King Klampz' Wedge Lock system secures the rails to the slab – an extremely solid connection that is approved by OSHA for use as edge protection.
This system is available two configurations – either timber handrail or tube and coupler.
Avoid setting up a wobbly ladder and having to move it several times when working on eves, roof gutters and soffits. With no drilling or fixings required, EasyDeck is a free-standing edge protection system that is fast to deploy and configured to cover any length you want.
Rather than working dangerously from above, from a sloping roof, workers can walk along the deck, facing the building, with the work area at hand height. With SafeSmart's own EasyRail incorporated into it, you are guaranteed effective fall protection all along the platform.
This system can also be configured to suit two-storey homes, and you can adjust platform height along the length of the EasyRail post.
Safety Net Fans catch and secure falling objects, protecting the public, site workers, vehicles and other property.
Designed to fix directly onto buildings or scaffolding during construction there are multiple sizes and attachments for easy installation. Made from 100% HDPE (virgin high-density polyethylene) and available in either two or three-layer options, this system is manufactured according to the standard EN 1263-1:2014.
All nets come with a border rope for added durability, and are stocked in standard sizes of 2.0m and 2.5m width, in 25m rolls. Custom widths and lengths also available.
Temporary and semi-permanent slab edge protection.
Heavy duty framed panel for longevity in harsh site conditions.
Posts bolt to slab edge, and slide-in panels are secured with a fixing bolt.
Optional coated finishes include galvanised and several powder coat colours for brand identification.
Sliding safety latches retain mesh panels preventing unintentional lift-off.
Available in multiple sizes.
The 4'11" height panels are ideal for high rise construction and to assist with pez (perimeter exclusion zone).
Panels may be stacked for easy storage and transportation.
Packs for your convenience. See inclusions below and/or select from drop-down on the right to enquire about a pack.
PACK F - 9' 10" STARTER BAY
Toe boards are required if the platform is over 6' 6" high
Timber scaffold planks can be used to create a toe board
INCLUSIONS:
HS046 EasyRail internal joining spigot 4
230233 Adjustable base plate 4
210420 Alloy EasyRail base frame 2
210422 1' 11" alloy EasyRail cantilever bracket 2
HS013 9' 10" standard platform 1
210230 13' 1" Alloy EasyRail truss, roof post 2
210423 9' 10" Alloy EasyRail diagonal brace 1
HS037 9' 10" grasper guardrail 1
210237 EasyRail fixed double coupler 8
PACK G - 19' 8" HANDRAIL
Attach to EasyRail roof post with fixed double couplers
Join together with expanding spigots
INCLUSIONS:
230234 19' 8" Alloy easy rail tube 4
HS046 EasyRail internal joining spigot 4
210237 EasyRail fixed double coupler 4
PACK H - 9' 10" ADD ON BAY
* Outriggers must be used every 3 bays minimum
* Diagonals must be used every 4 bays minimum
13' 1" x 19' 8" guardrails need to be added every second bay
INCLUSIONS:
HS037 9' 10" grasper guardrail 1
HS013 9' 10" standard platform 1
210230 13' 1" Alloy EasyRail truss, roof post 1
HS046 EasyRail internal joining spigot 2
230233 Adjustable base plate 2
210420 Alloy EasyRail base frame 1
210237 EasyRail fixed double coupler 4
210422 1' 11" Alloy EasyRail cantilever bracket 1
PACK I - 8' 2" ADD ON BAY
INCLUSIONS:
HS033 8' 2" grasper guardrail 1
HS007 8' 2" standard platform 1
210230 13' 1" Alloy EasyRail truss, roof post 1
HS046 EasyRail internal joining spigot 2 230233 Adjustable base plate 2
210420 Alloy EasyRail base frame 1
210237 EasyRail fixed double coupler 4
210422 1' 11" Alloy EasyRail cantilever bracket 1
PACK J - 68' 10" STRAIGHT PLATFORM EDGE PROTECTION
INCLUSIONS:
HS046 EasyRail internal joining spigot 28
230233 Adjustable base plate 16
210420 Alloy EasyRail base frame 8
210422 1' 11" Alloy EasyRail cantilever bracket 8
HS013 9' 10" Standard platform 7
210230 13' 1" Alloy EasyRail truss roof post 8
210423 9' 10" Alloy EasyRail diagonal brace 2
230234 19' 8" Alloy EasyRail tube 14
HS037 9' 10" Grasper Guardrail 7
210237 EasyRail fixed double coupler 32
HS035 Outrigger 2
For restoration, roof plumbing, general building, asbestos removal, or any other activity that takes place up high, the EasyRail edge protection system is an effective, unobtrusive and quick to install way of providing fall safety.
This is a fixing-free system, so no post-work patching—normally associated with traditional systems—is required in any substrate or rafters.
Proven to be up to 3 times as fast to install versus traditional edge protection.
Ramps and Walkways
Using very own Proscaf steel scaffolding, SafeSmart can design and supply temporary ramps in any configuration and for any application.
Using an 8-hole rosette joining point, ramp corners can be set at various angles not just 90°.
These bridges are made by SafeSmart according to any customer requirement. Every design is OSHA-compliant and easy to handle, thanks to sturdy aluminum construction. This example unit has a substantial weight rating of 496lb and a 3.9' width and a high-grip black surface deck. Or we offer perforated aluminum decks for grip and drainage in wet or muddy areas.
For our most popular units, bridges come in two standard lengths – either 13' 9" or 9' 10", but SafeSmart can design and build any temporary pedestrian bridge for any span or obstacle.
Excellent for pedestrian access over trenches, creeks, drains, excavations, ditches, dips and more, this unit is easily packed up via a single-movement collapsible handrail and redeployed by one or two people.
For on-foot access over any obstacle, SafeSmart are the go-to place for scaffold-based customised bridging systems.
With many clients, we design and supply custom systems based on our very own Proscaf steel scaffolding as a core material. Proscaf's 8-hole connection point allows for a greater variance of join angles beyond and below 90°.
A range of add-ons bring you the ultimate in performance and flexibility – marine grade weather-proof carpet, anti-slip nosing, polycarbonate panels, timber framing, timber stair treads and Monarflex wrap.
For creating specialist egress and ingress over ground-based obstacles, SafeSmart supplies a complete modular system, made from high-tensile aluminum.
These components combine in many different configurations to create steps, stairs, platforms and more for safely stepping over pipes and machinery. And for even more specialized scenarios, our custom department can create anything from scratch to suit your needs perfectly.
Our modular system is popular in HVAC, resources, oil and gas and other applications and industries such as at airports and distribution centers, for fast yet safe pedestrian shortcutting over conveyor belts and goods transfer systems.
SmartSpan, safely and efficiently create a temporary bridge on worksites, construction sites, at public events or other public areas. Perfect for access over trenches, canals, footpaths and worksites, this Modular Bridge System is made from high quality materials and features a 2.5 kPA SWL weight rating. And at 3'11" in width, easy access by workers and their tools is accommodated.
This bridge is offered with a perforated aluminium deck for grip and drainage in wet or muddy areas. Available in two lengths— 3'3"L and 9'11"L module sizes; join modules together to create a clear span bridge up to 49'2"L.
AdaptaStep™
AdaptaStep fills the gap between multiple component-based systems that require time consuming and costly assembly, and ‘cookie cutter' systems that force users to conform to inconvenient dimensions and higher costs.
The system uses minimal Pre-Engineered components that are easily connected to other members to produce endless shapes and configurations quickly.
AdaptaStep is the simple and cost-effective fix for access problems challenges. Installation is simple and requires no specialist tools or machinery. Both lightweight and modular, it can be used in areas with limited access or in tight spaces and can be configured to gain safe access over obstructions like pipes, conveyors and ducting, around machinery, between levels and across voids
Aluminum Scaffolding
Need to work at height in places where standard scaffolding won't fit? Don't risk downtime or injury by using inadequate height access products. Get all the benefits of a scaffold system along with the convenience of a small portable work platform, with SafeSmart's Mini Mobile Scaffold.
Whether you are building, renovating, painting, cleaning or carrying out maintenance tasks, this system can be utilized indoor easily, with a width of 2' 3", it fits through standard-width internal doors. The unit is constructed from high-grade (T6) weather-resistant aluminum, which features 2.9' 10" thick tube walls, for portability and strength.
This unit is easily and quickly assembled by one person, with the platform being mounted securely via a channel-locking system, which does not need a plan brace.
Available as a complete system or come back to us to add componentry.
SafeSmart USA's Mini Mobile Scaffold brings the convenience of a small scaffolding system to indoor and tight spaces.
For painters, electricians, renovators, maintenance contractors and more – don't risk using wobbly ladders just because you're working inside. Benefit from standing on a full-sized platform and somewhere to put your tools by wheeling this system through any internal standard-width door.
And add greater configuration flexibility by incorporating these expansion options. The all-terrain stair pack allows you to have the unit set up on two different levels of floor or steps; perfect for gaining safe and stable access to stairwells and voids.
Our long board packs allow you to join several Mini Mobiles together to make a temporary bridging system, or a long mobile scaffold. While we're expanding, also add the Corner Pack Series 700 to join systems in a perpendicular way.
All additions are as compliant as the core system itself. And effective and safe.
A versatile and easy to use system, this little scaffold is handy for many situations. Access lower heights, with plenty of room to stand and instant edge protection, during works in galleries, whilst painting, carrying out maintenance tasks or anything else that requires safe and compliant equipment for getting the task done fast.
The unit is easily wheeled around by one person, thanks to lightweight yet strong high-grade aluminum, and it fits through standard-width internal doors. Features a folding base section and snap-lock graspers for protecting your fingers from pinching. Easy to install and put away. Foot-locking castors make the unit secure in place when being used.
A channel-locking brace system adds sturdiness. The platform is available in varied platform heights from 6' 6" to 16' 4", along with a choice of deck lengths. And optional guardrail and/or base + guardrail pack makes the system one of the most versatile on the market.
SafeSmart's range of add-on products for H-frame scaffolding brings you more versatility and functionality. Eliminating the danger and inefficiency of standard ladders, our aluminum Z stairs allow you to ascend and descend with a spare hand free to carry tools. Deep treads keep you well-balanced underfoot and aluminum construction provides bounce-free strength and weather-resistance.
And add our truss beams to our scaffolding system. They are weight rated at nearly 1.5 tonnes across a 39' 4" span, and they are easy and fast to connect to any system via couplers.
These scaffold towers are made from high tensile 6261 T6 aluminum extrusion. They are popular with many industries across America, and they comply to strict regulations for working at height.
Extrusions feature 0.14"-thick walls, and the system can be further-stabilized by adding optional outriggers. SafeSmart's towers also have more cross-bracing than standard competitors' systems. SafeSmart also makes this product, for use in tight access areas, with easy and safe access to the Latvian birch platform deck via a weather-resistant trapdoor.
And for even more stability, the foot-braked castors automatically center themselves under the spindle – the ‘automatic movement' feature. All frame joints are fully-welded to eliminate any weak points. The unit weight rated at 992lb SWL and is available in a range of different platform heights, lengths and reach heights.
For H-frame scaffold towers, add more strength with our outriggers. These are made from high grade aluminum for easy handling and strength.
And for easy rolling, and stability whilst in use, we make our height-adjustable castors available separately as a spare or an add-on to an existing system. These castors feature a 12" adjustment range and a massive 1323lb load rating, ensuring years of excellent performance.
SafeSmart's own Premium Series scaffolding range is one of the hardiest and effective systems on the US market. In this series is a double width option, for those who need a wider platform work area. Featuring high-tensile 6261 T6 aluminum components and .013"-thick aluminum extrusion walls, you're assured high performance for weight rating and longevity.
When in use, there is a notable reduction in ‘flex' and ‘sway' on our system compared to others. And the Snaplock brace system makes assembly and tear down faster and easier. A full-grain Latvian birch platform has an anti-skid plywood top and an internally-accessed hatch.
When working in tighter spaces and indoor areas, gain access to low-level heights properly and safely with SafeSmart's scaffold towers. Leave the risky wobbly ladder aside and gain benefits from a big enough platform to stand on and easy manoeuvrability.
With our Trade Series products, anyone can afford a small scaffold tower. Add safety, compliance and efficiency to your work activities. This system is fast and easy to set up, and foot-lockable castors secure the unit in place when being used.
Made from high grade aluminum, this scaffold model features a weight rating of 496lb and comes in a variance of platforms heights from 8' 2" to 16' 4".
The Smart Scaffold Storage | Stillage
In stock
Scaffold Stillage
* Ideal for storing mobile scaffold frames and braces.
* Keeps scaffold neat and tidy for transport and storage.
* Standard with forklift and crane lifting points.
* Heavy duty galvanised steel construction, for heavy loads - 1000 x 1000mm galvanised steel stillage, with upright channels.
Temporary Roof and Wall Systems
Designed in direct consultation wit hthe scaffolding industry, SmartRoof provides a versatile and cost-effective system for enclusing or weather-proofing scaffold systems.
It is stronger and lighter and easier to install than its closest competitors and eliminates the need for single-use wraps, thanks to its innovative 'continuous sheet' keder system.
Compatible with Proscaf and tube and clip scaffolding components, SmartRoof can be supported by a standard aluminum scaffolding structure bolstered by the use of marine grade Proscaf aluminium trusses.
During installation, the Ripstop Polyester Decitex Canopy glides effortlessly through the rail system. And truss beam adjustable mounts can accommodate 5 to 45 degrees of pitch.
Containment and Acoustic Control
adScaff ™ is available in a range of standard roll sizes ideal for scaffolds, or custom-manufactured to your needs. adScaff ™ is incredibly strong while remaining lightweight, meaning it's easy to handle and install for just one person.
With full coverage (edge-to-edge printing) from the underside of the deck to your kickboard, adScaff ™ really makes the most of your branding opportunities.
With its unique substrate grid pattern, adScaff ™ exceeds the tensile strength requirements for containment mesh, allowing it to be used on both demolition and construction projects.
So, you'll only ever have to order and stock one scaffold product in the future – adScaff ™.
adScaff ™ can also be ordered in 8' 8" roll widths designed for vertical installation, spanning between standards (with overlap) and offering tie points across the entire surface area making installation easier.
The first and only printed containment mesh designed for scaffolds
Full branding and visual creativity through digital printing
Stronger than traditional containment mesh products: exceeds all government requirement
Light weight and fast to install using a range of tie connections
Rated to resist design wind speeds of 62mph when suitably restrained
UV tolerant protective outer face, substrate and uv/eco digital printing
Suitable for demolition use and construction applications
This was developed to mitigate the hammer noise generated within rock breaker attachments. And in combination with our acoustic panelling, you have a comprehensive system to reduce noise on site so you can get more working hours out of the day and comply with local regulations.
5-minute install time.
Custom-manufactured to suit various attachments ranging from 1T + in size.
Fire-retardant, water-resistant.
Ripstop PVC coating for additional strength.
Made from STC26 certified MLV coupled with 50mm fire rated NRC0.9 polyester (35kg M3). (RW27).
Up to 20dB noise reduction.
Mesh backing.
100mm Velcro overlaps to ensure 100% noise barrier and minimal noise leakage points.
Preliminary field testing has shown a max reduction of 13dBA when measured at an 8 metre distance from the rock breaker. Although there are many different types of rock breakers available, we are seeing a 7-13 dB reduction when using our RW27 Hushtec custom-fitted attachment ,which is a very noticeable change in SPL to the human ear.
These 4' 4" wide x 6' 6" high panels with up to 43dB sound reduction are fully transportable – easily move them with you to each construction site.
And the panel nature of the product means that you can make a combination of these fit perfectly to any scaffolding, temporary fencing and more, without any overhang that is normally experienced with standard one-piece sound blankets.
These acoustic curtains are weather and UV resistant for indoor and outdoor use. As a bonus, these panels may also aid in the containment of dust and fumes.
Available to suit a full range of noise frequencies
Can easily incorporate vision panels, access doors and other penetrations
Custom printing available to enhance your company brand and environmental image
Minimum order for custom printing only 10 panels
Designed to fix directly onto buildings or scaffolding during construction. Multiple sizes and attachments for easy
installation. Made from 100% HDPE (virgin high-density polyethylene) and now available in triple-effective, three-layer
options. All nets come with a border rope for added durability, and are stocked in standard sizes of 6' 6" and 8' 2"
width, in 82' rolls.
Border rope and 2.4" net made from 100% HDPE
0.8" tool net
Fine debris netting
Manufactured in Spain according to the standard
EN1263-1:2014
Platforma
From an Extendable to a Platform Ladder
SafeSmart Will Lift You Up Where You Belong
Do you operate in an industry where standard domestic height access just doesn't suffice? No matter what industry you're in, safety in the workplace is just as important as efficiency. If fact, an increase in safety standards often leads to heightened efficiency.
As a contractor, you should only use professional equipment that is made to withstand the stresses professional use. For everything from a simple step ladder, to a rolling ladder to a sturdy podium or platform ladder, the solutions are at SafeSmart Access, the USA's premier portable height access company.
Headquartered in LA, Cleveland and New York, SafeSmart Access are here to help solve the height access challenges of all industries right across the continent. Get in touch with us now.
Custom
America's Custom Workshop for Access Platforms and More
Unique Solutions to Unique Challenges
No matter what industry, a workplace that needs its contractors or employees to work at height needs to provide the infrastructure that makes the job safe and compliant.
And it's not just personal safety that is at stake. Any injury caused by improper height access not only causes distress to the worker; downtime causes reduced productivity and efficiency. With worksites that feature unique or irregular structures or machinery, there is also no excuse, especially when partnering with America's premier custom height and maintenance access workshop, SafeSmart Access.
Based in Los Angeles and New York, SafeSmart can assess any worksite across the USA, design a unique solution and custom build access platforms, maintenance platforms or any portable or permanent solution. Get in touch with us to discuss your access challenge.