Snow Brackets and Guards
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal Roofs
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, Snap Lock, Skyline, etc
• Accepts 3/4" fence pipe
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
• Ice Flags (recommended)
Snow Guards and Snow Fences
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal Roofs
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, Snap Lock, Skyline, etc
• Accepts 3/4" fence pipe
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
• Ice Flags (recommended)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal Roofs
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, Snap Lock, Skyline, etc
• Accepts 3/4" fence pipe
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
• Ice Flags (recommended)
Used on: Corrugated Metal Roofs
• Designed for new construction or retrofit applications
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: Corrugated Metal Roofs
• Designed for new construction or retrofit applications
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: Corrugated Metal Roof
• Designed for new construction or retrofit applications
• Bracket tail bent to match panel corrugation
• Available with standard or inverse corrugation
• Installed using (2) #14 fasteners
• Can be powder coated to match roofing material color
Used on: Corrugated Metal Roof
• Designed for new construction or retrofit applications
• Bracket tail bent to match panel corrugation
• Available with standard or inverse corrugation
• Installed using (2) #14 fasteners
• Can be powder coated to match roofing material color
Used on: Asphalt Shingle, Simulated Shake and Simulated Slate
• Designed for new construction applications
• Installed as shingles are installed
• Bracket fastens to roof sheathing
• Versatile nail pattern for easy installation
• Installed using a minimum of (4) roofing nails that must penetrate the sheathing
• 3 Brackets in one (works for asphalt shingle, simulated shake, and simulated slate roofs)
• Can be powder coated to match roofing material color
Used on: Corrugated Metal Roof
• Designed for new construction or retrofit applications
• Bracket tail bent to match panel corrugation
• Available with standard or inverse corrugation
• Installed using (2) #14 fasteners
• Can be powder coated to match roofing material color
Used on: Tile Roofs Specifically Bartile Legendary Tile
• Designed for new construction or retrofit applications
• No fasteners required
• Brackets hook to the upper end of the roof tile and counter batten
• Bracket is installed with triangular end of bracket at butt end of roof tile and upper end under the course above
• Can be powder coated to match roofing material color
Used on: Tile Roofs Specifically Bartile Legendary Tile
• Designed for new construction or retrofit applications
• No fasteners required
• Brackets hook to the upper end of the roof tile and counter batten
• Bracket is installed with triangular end of bracket at butt end of roof tile and upper end under the course above
• Can be powder coated to match roofing material color
Used on: Tile Roofs - Ludowici® Mid Profile Tiles
• Designed for new construction or retrofit applications
• Ludowici; Antinque, Brittany, Calais, Colonial, Crude, Flat Slab, Georgian, Greek, Norman, Provincial, Tapered Mission, etc.
• Formed to correspond to tile's length
• Bracket fastens to roof sheathing material
• Can be powder coated to match roofing material color
Used on: Tile Roofs - Ludowici® Mid Profile Tiles
• Designed for new construction or retrofit applications
• Ludowici; Antinque, Brittany, Calais, Colonial, Crude, Flat Slab, Georgian, Greek, Norman, Provincial, Tapered Mission, etc.
• Formed to correspond to tile's length
• Bracket fastens to roof sheathing material
• Can be powder coated to match roofing material color
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal Roofs
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, Snap Lock, Skyline, etc
• Accepts 3/4" x 3/4″ square fence pipe
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
• Ice Flags (recommended)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal Roofs
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, Snap Lock, Skyline, etc
• Accepts 3/4" x 3/4″ square fence pipe
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
• Ice Flags (recommended)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal Roofs
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, 1″ Snap Lock, and 1-3/4″ Snap Lock
• Allows for full installation without any penetration of the roof surface
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
Used on: All Roof Types
• Designed for new construction or retrofit applications
• Bracket to hold gutter to fascia
• 5" or 6" available to fit most half-round gutters
• Can be powder coated to match roofing material color
Used on: Concrete Tiles
• Designed for new construction applications
• Specifically - Eagle, Boral, Hanson, and other similar tiles
• Brackets hook to the upper end of the roof tile and counter batten
• Bracket is installed with triangular end of bracket at butt end of roof tile and upper end under the course above
• (1) 10 D galvanized nail fastener required
• Can be powder coated to match roofing material color
Used on: Concrete Tiles
• Designed for new construction applications
• Specifically- Columbia, Eagle, Monier Lifetile, Unicrete, Westile, and other similar tile
• Brackets hook to the upper end of the roof tile and counter batten
• Bracket is installed with triangular end of bracket at butt end of roof tile and upper end under the course above
• (1) 10 D galvanized nail fastener required
• Can be powder coated to match roofing material color
Used on: Simulated Shake, Simulated Slate and Asphalt Shingles
• Designed for new construction applications
• Installed using (4) 2" roofing nails or #8 stainless steel screws
• Can be powder coated to match roofing material color
Used on: Clay Tiles 16 1/2″ to 17″
• Designed for new construction or retrofit applications
• Specifically- Eagle, Boral, Hanson, other similar concrete or clay tiles
• Brackets hook to the upper end of the roof tile and counter batten
• Bracket is installed with triangular end of bracket at butt end of roof tile and upper end under the course above
• No fasteners required
• Can be powder coated to match roofing material color
Used on: Concrete Tiles 16 1/2″ to 17″
• Designed for new construction or retrofit applications
• Specifically- Columbia, Eagle, Monier Lifetile, Unicrete, Westile, and other similar tiles.
• Brackets hook to the upper end of the roof tile and counter batten
• Bracket is installed with triangular end of bracket at butt end of roof tile and upper end under the course above
• No fasteners required
• Can be powder coated to match roofing material color
Used on: Concrete Tiles 15″
• Designed for new construction applications
• Specifically- Bartile, Vande-Hey, and other similar concrete tiles that are installed using a counter batten system.
• Brackets hook to the upper end of the roof tile and counter batten
• Bracket is installed with triangular end of bracket at butt end of roof tile and upper end under the course above
• No fasteners required
Used on: Concrete Tiles 15″
• Designed for new construction applications
• Specifically- Bartile, Vandehey, and other similar tiles
• Brackets hook to the upper end of the roof tile and counter batten
• Bracket is installed with triangular end of bracket at butt end of roof tile and upper end under the course above
• (1) 10 D galvanized nail fastener required
Used on: Concrete Tiles 15"
• Designed for new construction applications
• Specifically- Bartile, Vandehey, and other similar tiles
• Brackets hook to the upper end of the roof tile and counter batten
• Bracket is installed with triangular end of bracket at butt end of roof tile and upper end under the course above
• No fasteners required
Used on: Concrete Tiles 15"
• Designed for new construction applications
• Specifically- Bartile, Vandehey, and other similar tiles
• Brackets hook to the upper end of the roof tile and counter batten
• Bracket is installed with triangular end of bracket at butt end of roof tile and upper end under the course above
• No fasteners required
Used on: Corrugated Metal
• Designed for new construction or retrofit applications
• Used on 7/8" Corrugated Metal Panels
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Corrugated Metal
• Designed for new construction or retrofit applications
• Used on 7/8" Corrugated Metal Panels
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Corrugated Metal
• Designed for new construction or retrofit applications
• Used on 7/8" Corrugated Metal Panels
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Corrugated Metal
• Designed for new construction or retrofit applications
• Used on 7/8" Corrugated Metal Panels
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material col
Used on: Asphalt Shingle
• Designed for new construction applications
• Installed as shingles are installed
• Bracket fastens to roof sheathing
• Installed using (4) 2" roofing nails or #8 stainless steel screws
• Can be powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, and Wood Shake
• Designed for new construction or retrofit applications
• Available with or without fastener cover clip
• Installed with (2) #14 screws fastened through roofing material and sheathing below
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Cedar Shingle, Wood Shake or Slate
• Designed for new construction applications
• Installed using (4) 2" roofing nails or #8 stainless steel screws
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Cedar Shingle, Wood Shake or Slate
• Designed for new construction applications
• Installed using (4) 2" roofing nails or #8 stainless steel screws
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Cedar Shingle, Wood Shake or Slate
• Designed for new construction applications
• Installed using (4) 2" roofing nails or #8 stainless steel screws
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Cedar Shingle, Wood Shake or Slate
• Designed for new construction applications
• Installed using (4) 2" roofing nails or #8 stainless steel screws
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Flat Seam Metal
• Designed for retrofit applications
• Includes a cover clip
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Flat Seam Metal
• Designed for retrofit applications
• Includes a cover clip
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Metal Shingle, Wood Shake, and Shingle
• Designed for retrofit applications
• Available with cover clip
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Wood Shake
• Designed for retrofit applications
• Available with cover clip
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Wood Shake
• Designed for retrofit applications
• Available with cover clip
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Metal/Granule Tile
• Designed for new construction or retrofit applications
• Installed using horizontal battens
• 3/16" screws required
• Can be powder coated to match roofing material color
Used on: Metal/Granule Tiles
• Designed for new construction or retrofit applications
• Installed using horizontal battens
• 3/16" screws required
• Can be powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, and Wood Shake
• Designed for new construction or retrofit applications
• Made from extruded aluminum
• Manufactured in the USA
• Custom widths available to fit into the narrow flats on metal roofs or applications with limited space
• The face accepts a color insert providing a perfect color match
Used on: Tile
• Designed for new construction or retrofit applications
• Can be used with Ludowici® Spanish, Italian Pan, and Palm Beach tiles
• Formed to correspond to tile's length
• Bracket fastens to roof sheathing material
• Can be powder coated to match roofing material color
Used on: Tile
• Designed for new construction or retrofit applications
• Can be used with Ludowici® Spanish, Italian Pan, and Palm Beach tiles
• Formed to correspond to tile's length
• Bracket fastens to roof sheathing material
• Can be powder coated to match roofing material color
Used on: Tile
• Designed for new construction or retrofit applications
• Can be used with Ludowici® Americana, Classic, French, Lanai, Willamsburg, etc.
• Formed to correspond to tile's interlocking profile
• End of bracket formed to lock onto the upper end of tile for ease of installation
• No fasteners required
• Can be powder coated to match roofing material color
Used on: Tile
• Designed for new construction or retrofit applications
• Can be used with Ludowici® Americana, Classic, French, Lanai, Willamsburg, etc.
• Formed to correspond to tile's interlocking profile
• End of bracket formed to lock onto upper end of tile for ease of installation
• No fasteners required
• Can be powder coated to match roofing material color
Used on: Tile Roofs - Brava's Spanish Tile
• Designed for new construction or retrofit applications
• #8 screw fasteners required
• Must be installed into structural roof member such as a truss or rafter beam
• Can be powder coated to match roofing material color
Used on: Asphalt Shingle roofs, Cedar Shingle, Flat Seam Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, and Wood Shake
• Designed for new construction or retrofit applications
• Available with or without fastener cover clip
• Installed with (2) #14 screws fastened through roofing material and sheathing below
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Tile Roofs - Boral's Madera Tile
• Designed for new construction or retrofit applications
• Formed to correspond to Boral's Madera tile profile
• Can be powder coated to match roofing material
Used on: Slate
• Designed for retrofit applications
• No fasteners required
• Can be powder coated to match roofing material color
Used on: Slate
• Designed for retrofit applications
• No fasteners required
• Can be powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, and Wood Shake
• Designed for new construction or retrofit applications
• Made from extruded aluminum
• Bracket fastens to roof sheathing
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Single Lock, Tee Seam, Zip Rib, etc.
• Accepts 3/4" fence pipe
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
• Ice Flags (recommended)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, Snap Lock, Skyline, etc
• Accepts 3/4" fence pipe
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
• Ice Flags (recommended)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Single Lock, Tee Seam, Zip Rib, etc.
• Accepts 3/4" fence pipe
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
• Ice Flags (recommended)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Single Lock, Tee Seam, Zip Rib, etc.
• Accepts 3/4" fence pipe
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
• Ice Flags (recommended)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Single Lock, Tee Seam, Zip Rib, etc. under 1 3/4″ tall
• Accepts 3/4" fence pipe
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
• Ice Flags (recommended)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Single Lock, Tee Seam, Zip Rib, etc. under 1 3/4″ tall
• Accepts 3/4" fence pipe
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
• Ice Flags (recommended)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, and Snap Lock
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
Attractive Design
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, and Snap Lock
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, and Snap Lock
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, and Snap Lock
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, and Snap Lock
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, and Snap Lock
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
No Set Screws
No Panel Penetration
Used on: Standing Seam Metal
• Designed for new construction or retrofit applications
• Available for all rib types including: Double Lock, Single Lock, and Snap Lock
• Allows for full installation without any penetration of the roof surface
• Powder coated to match roofing material color
• 3/8" DIA X 1-3/4" or 2" carriage bolt (2)
Used on: Asphalt Shingle, Cedar Shingle, Wood Shake, and Shingle
• Designed for new construction applications
• Bracket fastens to roof sheathing
• Can be powder coated to match roofing material color
Used on: Corrugated Metal
• Designed for new construction or retrofit applications
• Bracket tail bent to match panel corrugation
• Available with standard or inverse corrugation
• Installed using (2) #14 fasteners
• Can be powder coated to match roofing material color
Used on: Tile
• Designed for most stick framed roof types
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, and Wood Shake
• Designed for use in new construction applications
• Can be manufactured for 6"or 8" log diameters
• Can be used with most common roofing materials
• Fastens to rafter, purlin, or other structural roof member
• Can be powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, and Wood Shake
• Designed for use in new construction applications
• Manufactured for 4"x4", 6"x6", 8"x8" or 12"x12" timber sizes
• Can be used with most common roofing materials
• Fastens to rafter, purlin, or other structural roof member
• Can be powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Slate, Simulated Slate, and Wood Shake
• Designed for new construction or retrofit applications
• Designed for most stick framed roof types
• Accepts 3/4" x 3/4″ square fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Slate, Simulated Slate, and Wood Shake
• Designed for new construction or retrofit applications
• Designed for most stick framed roof types
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Slate, Simulated Slate, and Wood Shake
• Designed for new construction or retrofit applications
• Designed for most stick framed roof types
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Slate, Simulated Slate, and Wood Shake
• Designed for new construction or retrofit applications
• Designed for most stick framed roof types
• Accepts 3/4"x 3/4″ square fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags as option
• Powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Slate, Simulated Slate, and Wood Shake
• Designed for new construction or retrofit applications
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Slate, Simulated Slate, and Wood Shake
• Designed for new construction or retrofit applications
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
Used on: Corrugated Metal
• Designed for new construction or retrofit applications
• Designed for corrugated metal roofs
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Slate, Simulated Slate, and Wood Shake
• Designed for new construction or retrofit applications
• Designed for most stick framed roof types
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Slate, Simulated Slate, and Wood Shake
• Designed for new construction or retrofit applications
• Designed for most stick framed roof types
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: Corrugated Metal
• Designed for new construction or retrofit applications
• Designed for corrugated metal roofs
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Slate, Simulated Slate, Tile, and Wood Shakes
• Designed for new construction or retrofit applications
• Designed for most stick framed roof types
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Slate, Simulated Slate, Tile, and Wood Shake
• Designed for new construction or retrofit applications
• Designed for most stick framed roof types
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Slate, Simulated Slate, and Wood Shake
• Designed for new construction or retrofit applications
• Designed for most stick framed roof types
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: Asphalt Shingle, Cedar Shingle, Flat Seam Metal, Granule Metal, Metal Panel, Slate, Simulated Slate, and Wood Shake
• Designed for new construction or retrofit applications
• Designed for most stick framed roof types
• Accepts 1" (1.315"OD) fence pipe
• Installed using (4) 3/8" Lag bolts
• Must be installed into structural roof member such as a truss or rafter beam
• Ice Flags (recommended)
• Powder coated to match roofing material color
Used on: EPDM, Single Ply, TPO, PVC, and similar roofing materials
• Designed for new construction or retrofit applications
• Designed for membrane type roof applications
• Must be installed into the structure
• Accepts 3/4" fence pipe
• Can be powder coated to match roofing material color
• Ice Flags (recommended)
Used on: EPDM, Single Ply, TPO, PVC and similar roofing materials.
• Designed for new construction or retrofit applications
• Designed for membrane type roof applications
• Must be installed into the structure
• Accepts 3/4" fence pipe
• Can be powder coated to match roofing material color
• Ice Flags (recommended)
Used on: EPDM, Single Ply, TPO, PVC and similar roofing materials
• Designed for new construction or retrofit applications
• Designed for membrane type roof applications
• Must be installed into the structure
• Accepts 3/4" fence pipe
• Can be powder coated to match roofing material color
• Ice Flags (recommended)
Used on: Exposed fastener metal panel roofing
• Designed for new construction or retrofit applications
• Designed for use with exposed fastener metal panel roofing
• Fastens to purlin, blocking or other structural framings
• Accepts 3/4" fence pipe
• Can be powder coated to match roofing material color
• Ice Flags (recommended)
Used on: Exposed fastener metal panel roofing
• Designed for new construction or retrofit applications
• Designed for use with exposed fastener metal panel roofing
• Fastens to purlin, blocking or other structural framings
• Accepts 3/4" fence pipe
• Can be powder coated to match roofing material color
• Ice Flags (recommended)
Used on: Exposed fastener metal panel roofing
• Designed for new construction or retrofit applications
• Designed for use with exposed fastener metal panel roofing
• Fastens to purlin, blocking or other structural framings
• Accepts 3/4" fence pipe
• Can be powder coated to match roofing material color
Enhances Ventilation
Fits All Tile Profiles
Used on: Concrete and Clay Tile
• Designed for new construction applications
• Elevates the nailing board for proper ventilation
• Pre-scored bend lines for adjustable height and slope
• Accepts 2" X 2" nominal nailer board
• Easy application for hip and ridge tiles
• Fits all tile profiles at the hips and ridges
Used on: Asphalt Shingle, Cedar Shingle, Corrugated Metal, Flat Seam Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, Tile, and Wood Shake
• Designed for new construction or retrofit applications
• Conforms to roof surface
• Highly durable and weather resistant
• Maximum formability and long-term functionality
• Fully recyclable
Used on: Asphalt Shingle, Cedar Shingle, Corrugated Metal, Flat Seam Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, Tile, and Wood Shake
• Designed for new construction or retrofit applications
• Conforms to roof surface
• Highly durable and weather resistant
• Maximum formability and long-term functionality
• Full butyl backing
• Fully recyclable
• Light weight
Used on: Asphalt Shingle, Cedar Shingle, Corrugated Metal, Flat Seam Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, Tile, and Wood Shake
• Designed for new construction or retrofit applications
• Conforms to roof surface
• Highly durable and weather resistant
• Maximum formability and long-term functionality
• Fully recyclable
Used on: Asphalt Shingle, Cedar Shingle, Corrugated Metal, Flat Seam Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, Tile, and Wood Shake
• Designed for new construction or retrofit applications
• Conforms to roof surface
• Highly durable and weather resistant
• Maximum formability and long-term functionality
• Full butyl backing
• Fully recyclable
• Light weight
Used on: Asphalt Shingle, Cedar Shingle, Corrugated Metal, Flat Seam Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, Tile, and Wood Shake
• Designed for new construction or retrofit applications
• Conforms to roof surface
• Highly durable and weather resistant
• Maximum formability and long-term functionality
• Full butyl backing
• Fully recyclable
• Light weight
Used on: Asphalt Shingle, Cedar Shingle, Corrugated Metal, Flat Seam Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, Tile, and Wood Shake
• Designed for new construction or retrofit applications
• Conforms to roof surface
• Highly durable and weather resistant
• Maximum formability and long-term functionality
• Full butyl backing
• Fully recyclable
• Light weight
Used on: Asphalt Shingle, Cedar Shingle, Corrugated Metal, Flat Seam Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, Tile, and Wood Shake
• Designed for new construction or retrofit applications
• Conforms to roof surface
• Highly durable and weather resistant
• Maximum formability and long-term functionality
• Full butyl backing
• Fully recyclable
• Light weight
Used on: Asphalt Shingle, Cedar Shingle, Corrugated Metal, Flat Seam Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, Tile, and Wood Shake
• Designed for new construction or retrofit applications
• Conforms to roof surface
• Highly durable and weather resistant
• Maximum formability and long-term functionality
• Full butyl backing
• Fully recyclable
• Light weight
Used on: Asphalt Shingle, Cedar Shingle, Corrugated Metal, Flat Seam Metal, Metal Panel, Simulated Slate, Slate, Standing Seam Metal, Tile, and Wood Shake
• Designed for new construction or retrofit applications
• Conforms to roof surface
• Highly durable and weather resistant
• Maximum formability and long-term functionality
• Full butyl backing
• Fully recyclable
• Light weight