Membrane Roofing CAD Drawings

100 System

101B Membrane Layout Full Sheets

102A Side Lap

103A End Lap with Cover Strip

201B Coated Metal Drip Edge

301A Wall Flashing with Counterflashing

302A Wall Curb Flashing with Termination Bar

325 Corner Curb Wrap

327A Universal Preformed Corner Inside Reinforcement

329A Universal Preformed Corner Outside Reinforcment

506A Preformed Vent Boot

513A Standard Drain Flashing

525 Pourable Sealant Pocket

201 MB BUR Flat Edge Flashing

202 MB BUR Tapered Edge Flashing

203 MB BUR Raised Perimeter Edge with Metal Cap Fascia Flashing

205 MB BUR Perimeter Gutter

210 MB BUR Scupper Thru Roof Edge

301 MB BUR Wall Flashing for Supported Deck

302 MB BUR Wall Flashing with Surface Mounting Counterflashing

303 MB BUR Base Flashing for NonWall Supported Deck

306 MB BUR High Parapet Wall

307 MB BUR Alternate High Parapet Wall

310 MB BUR Stratavent Eliminator Nailable Venting New Roof, Nailable Deck

311 MB BUR Stratavent Eliminator Perforated Venting New Roof, NonNailable Deck

312 MB BUR Stratavent Eliminator Perforated Venting Recover with New ISO

313 MB BUR Stratavent Eliminator Perforated Venting Recover without New ISO

315 MB BUR Inside Corner Flashing

316 MB BUR Outside Corner Flashing

320 MB BUR Curb Flashing Area Divider

404 MB BUR Metalastic Wall Expansion Joint Curb Type

501 MB BUR Roof Drain

502 MB BUR Roof Drain

510 MB BUR MCurb Flashing

513 MB BUR Piping Through Roof Deck

521 MB BUR Equipment Base Flashing

FB-1B.1 - Coated Drip Edge Fascia - TPO, PVC or KEE HP

FB-1C.1 - Metal Bar Edge Termination

FB-1D.1 - SecurEdge 200

FB-1E.1 - SecurEdge 300

FB-1F.1 - SecurEdge 2000 & 3000

FB-2A - EPDM Membrane Splices - Projects with 10, 15, & 20 Year Warranties

FB-2A.1 - EPDM Membrane Splices - Projects with 145mil Membrane or 25/30 Year Warranties

FB-2B.1 - Thermoplastic Membrane Splices

FB-3A.1 - Deck-to-Deck Expansion Joint

FB-3B.1 - Deck-to-Wall Expansion Joint

FB-6A.1 - Roof Drain with Continuous Membrane

FB-6B.1 - Roof Drain with Separate Target Splice

FB-8A.1 - Pre-Molded Pipe Seals

FB-8B - Field Fabricated Pipe Flashing

FB-9 - Membrane Terminations (PAGE 1 OF 2)

FB-9 - Membrane Terminations (PAGE 2 OF 2)

FB-12A.1A - Parapet/Curb with Separate Membrane - Full Coverage

FB-12A.1B - Parapet/Curb with Separate Membrane - Bead Applied

FB-12B.1A - Parapet/Curb with Continuous Membrane - Full Coverage

FB-12B.1B - Parapet/Curb with Continuous Membrane - Bead Applied

FB-12C - Parapet/Curb with Water Based Adhesive

FB-15A.1 - EPDM Pressure Sensitive Inside Corner

FB-15B.1 - EPDM Pressure Sensitive Outside Corner

FB-15C.1 - Thermoplastic Pre-Molded Inside Corner

FB-15D.1 - Thermoplastic Pre-Molded Outside Corner

FB-16A.1 - EPDM Pressure Sensitive Pourable Sealer Pocket

FB-16B.1 - Thermoplastic Molded Sealant Pocket

FB-18A.1 - Through-Wall Scupper with Pressure Sensitive EPDM Flashing

FB-18B.1 - Through-Wall Scupper with SecurWeld or Sure-Flex Metal

FB-25.1 - Simulation of Metal Roof in Thermoplastic Membranes

FB-27 - Fleeceback Membrane Attachment Using Bead Adhesive

VF-1.1 - VersiTrim Drip Edge Fascia

VF-1.2A - VersiTrim Heat Weldable Drip Edge

VF-1.3A - Metal Bar Edge Termination

VF-1.4A - VersiTrim 200

VF-1.5A - VersiTrim 300

VF-1.6A - VersiTrim 2000 & 3000

VF-2.2A - Thermoplastic Membrane Splices

VF-3.1A - Deck-to-Deck Expansion Joint

VF-3.2A - Deck-to-Wall Expansion Detail

VF-6.1A - Roof Drain with Continuous Membrane

VF-6.2A - Roof Drain with Separate Target Splice

VF-8.1A - Pre-Molded Pipe Seal

VF-8.2 - Field Fabricated Pipe Flashing

VF-9.0 - Membrane Terminations (PAGE 1 OF 2)

VF-9.0 - Membrane Terminations (PAGE 2 OF 2)

VF-12.3 - Parapet/Curb with Water Based Adhesive

VF-12A.1A - Parapet/Curb with Separate Membrane - Full Coverage

VF-12A.1B- Parapet/Curb with Separate Membrane - Bead Applied

VF-12B.2A- Parapet/Curb with Continuous Membrane - Full Coverage

VF-12B.2B- Parapet/Curb with Continuous Membrane - Bead Applied

VF-15.3A - Thermoplastic Pre-Molded Inside Corner

VF-15.4A - Thermoplastic Pre-Molded Outside Corner

VF-16.2A - Thermoplastic Molded Sealant Pocket

VF-18.2A - Through-Wall Scupper with Thermoplastic Coated Metal

VF-25.1A - Simulation of Metal Roof in Thermoplastic Membranes

VF-27 - VersiFleece Membrane Attachment Using Bead Adhesive